Hostname: page-component-84b7d79bbc-g78kv Total loading time: 0 Render date: 2024-07-28T14:27:13.818Z Has data issue: false hasContentIssue false
  • English
  • Français

Short-Time Hydrogen Passivation of Poly-Si CMOS Thin film Transistors by High Dose Rate Plasma Ion Implantation

Published online by Cambridge University Press:  21 February 2011

Shu Qin ,
James D. Bernstein ,
Yuanzhong Zhou ,
Wei Liu ,
Chung Chan  and
Tsu-Jae King
Shu Qin
Affiliation:
Plasma Science and Microelectronics Laboratory, Department of Electrical and Computer Engineering, Northeastern University, Boston, MA 02115, shuqin@neu.edu
James D. Bernstein
Affiliation:
Plasma Science and Microelectronics Laboratory, Department of Electrical and Computer Engineering, Northeastern University, Boston, MA 02115, shuqin@neu.edu
Yuanzhong Zhou
Affiliation:
Plasma Science and Microelectronics Laboratory, Department of Electrical and Computer Engineering, Northeastern University, Boston, MA 02115, shuqin@neu.edu
Wei Liu
Affiliation:
Plasma Science and Microelectronics Laboratory, Department of Electrical and Computer Engineering, Northeastern University, Boston, MA 02115, shuqin@neu.edu
Chung Chan
Affiliation:
Eaton Corp., Semiconductor Equipment Division, 108 Cherry Hill Drive, Beverly, MA 01915
Tsu-Jae King
Affiliation:
Xerox Palo Alto Research Center, 3333 Coyote Hill Road, Palo Alto, CA 94304
Get access

Abstract

Plasma ion implantation (PII) hydrogenation has been developed for defect passivation in polycrystalline silicon (poly-Si) thin film transistors (TFTs). A high dose rate PII process using a microwave multipolar bucket (MMB) plasma source and a 12.5 kHz pulse generator achieves saturation of device parameter improvement in 5 minutes, which is much shorter than other hydrogenation methods investigated thus far. These results have been achieved in one sixth the implant time of our previous PII experiments and are in good agreement with our process simulation.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 396: Symposium A – Ion-Solid Interactions for Materials Modification and Processing , 1995 , 515
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Kamins, T. I. and Marcoux, P. J., IEEE Electron Device Lett. 1, 159 (1980).Google Scholar
2 Wu, I., Huang, T., Jackson, W. B., Lewis, A.G. and Chiang, A., IEEE Electron Device Lett 12, 181 (1991).Google Scholar
3 Ditizio, R. A., Liu, G., Fonash, S.J., Hseih, B. C. and Greve, D.W., Appl. Phys. Lett. 56, 1140 (1990).Google Scholar
4 Baert, K., Murai, H., Kobayashi, K., Namizaki, H. and Nunoshita, M., Jpn. J. Appl. Phys. 32, 2601 (1993).Google Scholar
5 Bernstein, J. D., Qin, S., Chan, C. and King, T.-J., IEEE Electron Device Lett. 16, 421 (1995).Google Scholar
6 Bernstein, J. D., Qin, S., Chan, C. and King, T.-J., ΓΕΕΕ Trans, on Electron Devices submitted (1995).Google Scholar
7 Conrad, J. R., Radtke, J., Dodd, R. A. and Worzala, F., J. Appl. Phys. 62, 4591 (1987).Google Scholar
8 Cheung, N. W., Nucl. Instr. and Meth. B55, 811 (1991).Google Scholar
9 Qin, S., McGruer, N., Chan, C. and Warner, K., IEEE Trans, on Electron Devices 39, 2354 (1992).Google Scholar
10 Ziegler, J. F., Biersack, J.P. and Littmark, U., The Stopping Range of Ions in Solids. Pergamon Press, New York, 1985.Google Scholar
11 King, T.-J., Hack, M. G., and Wu, I, J. Appl. Phys. 17, 908 (1994).Google Scholar