Hostname: page-component-84b7d79bbc-g78kv Total loading time: 0 Render date: 2024-07-30T11:23:58.260Z Has data issue: false hasContentIssue false
  • English
  • Français

Simulation of Microstructural Evolution During Thermomechanical Cycling in Pb-Sn Solders

Published online by Cambridge University Press:  01 February 2011

Michael Woodmansee  and
Veena Tikare
Michael Woodmansee
Affiliation:
The Georgia Institute of Technology, The George W. Woodruff School of Mechanical Engineering, Atlanta, GA 30332-0405, U.S.A.
Veena Tikare
Affiliation:
Sandia National Laboratories, Albuquerque, NM 87185-1411, U.S.A.
Get access

Abstract

Pb-Sn solders are known to coarsen and deform heterogeneously under shear thermomechanical cycling. Solder joint failure often occurs within these coarsened shear bands. The connection between microstructure and materials properties is well documented, which leads to the conclusion that an improved understanding of the interaction between stress and microstructural evolution will better enable the prediction of materials properties over time. In this paper, we simulate microstructural evolution of Pb-Sn solders using a novel two-phase version the Potts model, a kinetic Monte Carlo model that is coupled to a finite element mechanics model. Using this model, possible mechanisms for heterogeneous coarsening are explored.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 731: Symposium W – Modeling and Numerical Simulation of Materials Behavior and Evolution , 2002 , W6.4
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Dreyer, W. and Muller, W.H., “A Study of the Coarsening in Tin/Lead Solders,” International Journal of Solids and Structures, v 37, p 3841–3871, 2000.Google Scholar
2. Frear, D., Grivas, D., and Morris, J.W. Jr, “A Microstructural Study of the Thermal Fatigue Failure of 60Sn-40Pb Solder Joints,” J. Electronic Materials, Vol. 17, p 171–180, 1988.Google Scholar
3. Freer Goldstein, J.L and Morris, J.W. Jr, “Microstructural Development of Eutectic Bi-Sn and Eutectic In-Sn During High Temperature Deformation,” v 23, p 477–486, 1994.Google Scholar
4. Cutiongco, E.C., Vaynman, S., Fine, M.E., and Jeanotte, D.A., “Isothermal Fatigue of 63Sn-37Pb Solder,” Journal of Electronic Packaging, Vol. 112, p 110–114, 1990.Google Scholar
5. Wolverton, W.M., “Mechanisms And Kinetics Of Solder Joint Degradation,” Brazing and Soldering, No.16, p 33–38, 1987.Google Scholar
6. Bangs, E.R. and Beal, R.E., “Effect of Low Frequency Thermal Cycling on the Crack Susceptibility of Soldered Joints,” Weld Journal, v 54, p 377s–383s, 1975.Google Scholar
7. Ross, R.G. and Wen, L.-C., “Solder Creep-Fatigue Interactions with Flexible Pbed Surface Mount Components,” Thermal Stress and Strain in Microelectronics Packaging, Lau, J.H., Ed., Van Nostrand Reinhold, p 607–647, 1993.Google Scholar
8. Kashyap, B.P. and Murty, G.S., “Influence of Non-Equiaxed Microstructure on the Superplastic Behavior of Pb-Sn Eutectic,” Trans. Japan Inst. Metal, v 22, 1981, p 258–266.Google Scholar
9. Cagnon, M., Suery, M., Eberhardt, A., and , Baudelet, “High Temperature Deformation of the Pb-Sn Eutectic,” Acta Met., v 25, p 71–75, 1977.Google Scholar
10. Morris, J.W. Jr, Tribula, D., Summers, E., and Grivas, D., “The Role of Microstructure in Thermal Fatigue of Pb-Sn Solder Joints,” Solder Joint Reliability, 1991, p 255–265.Google Scholar
11. Bird, J.E., Mukherjee, A.K., and Dorn, J.F., Quantitative Relations Between Properties and Microstructure, Israel University Press, 1969.Google Scholar
12. Saigal, A., Fuller, E.R., Langer, S.A., Carter, W.C., Zimmerman, M.H. and Faber, K.T., Effect of Interface Properties on Microcracking of Iron Titanate, Scripta Materialia, v38, p 1449–1453, 1998.Google Scholar
13. , Stephens and , Frear, Time-Dependent Deformation Behavior of Near-Eutectic 60Sn-40Pb Solder, Metallurgical and Materials Transactions, v30A, p 1301–1313, 1999.Google Scholar