Hostname: page-component-5c6d5d7d68-wtssw Total loading time: 0 Render date: 2024-08-19T13:18:26.212Z Has data issue: false hasContentIssue false
  • English
  • Français

Single-Step Microstructure Patterning in Titania-Doped Sol-Gel Glassy Thin Films with Electron Beams

Published online by Cambridge University Press:  01 February 2011

Xinshi Luo ,
Congji Zha  and
Barry Luther-Davies
Xinshi Luo
Affiliation:
Research School of Physical Sciences and Engineering, Australian National University, Canberra ACT 0200, AustraliaTel: 61–2–61250694, Fax: 61–2–61250029 Email: Xinshi.Luo@anu.edu.au
Congji Zha
Affiliation:
Research School of Physical Sciences and Engineering, Australian National University, Canberra ACT 0200, AustraliaTel: 61–2–61250694, Fax: 61–2–61250029 Email: Xinshi.Luo@anu.edu.au
Barry Luther-Davies
Affiliation:
Research School of Physical Sciences and Engineering, Australian National University, Canberra ACT 0200, AustraliaTel: 61–2–61250694, Fax: 61–2–61250029 Email: Xinshi.Luo@anu.edu.au
Get access

Abstract

To achieve a simplified microstructure patterning process, patterning in thin films with a singlestep exposure to UV-light or E-beam process for fabrication of integrated optical waveguides and components is of great interest in optics, because the complicated structure developing stage by wet chemical or plasma etching is not required. In this paper, we describe our study on the microstructure patterning in TiO2-doped hybrid glassy polymer thin films by irradiating with focused E-beam. An anhydrous sol-gel process based on hydrolysis and condensation of metal alkoxides with boric acid under non-hydrous conditions was applied to homogeneously incorporating TiO2 into silica network, and transparent glassy TiO2-doped thin films with varied TiO2 concentrations (up to 40 mol%) were prepared by spin coating the hybrid polymer onto fused silica substrates and silicon wafers. The TiO2-doped hybrid material showed a low OH absorption, low optical losses at the telecommunication windows (<0.40 dB/cm at 1550 nm and <0.20 dB/cm at 1310 nm respectively), good thermo-optical linearity and good thermal stability up to 200 °C. Single-step direct surface patterning in the TiO2-doped hybrid glassy films with focused electron beams irradiation showed that fine structure with resolution at submicron level can be fabricated. As the process does not need a developing (etching) process, the profiles of the lines fabricated by the E-beam direct writing showed few distortion. The high precise patterning microstructure with submicron feature sizes in the TiO2-doped hybrid glassy thin films may provide potentials for applications to the fabrication of optical gratings.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 847: Symposium EE – Organic/Inorganic Hybrid Materials , 2004 , EE13.47
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Park, O.H., Kim, S.J., and Bae, B.S., J. Mater. Chem., 14 (11), 1749–1753 (2004).Google Scholar
2. Que, W., and Hu, X., J. Sol-Gel Sci. Tech., 28 (3), 319–325 (2003).Google Scholar
3. Enami, Y., Meredith, G., Peyghambarian, N., Kawazu, M., and Jen, A.K.-Y., Appl. Phys. Lett., 82 (4), 490–492 (2003).Google Scholar
4. Kashyap, R., in Fibre Bragg Gratings, ed. Kelly, P.L., Kaminow, I. and Agrawal, G., Academic Press, London, p.36 (1999).Google Scholar
5. Gusarov, A.I. and Doyle, D.B., Optics Lett., 25 (12), 872–874 (2000).Google Scholar
6. Seddon, A.B., Sol-Gel and Polymer Photonic Devices, SPIE, CR68, 143–171 (1997).Google Scholar
7. Andrews, M.P. and Najafi, S., Sol-Gel and Polymer Photonic Devices, SPIE, CR 68, 253–285 (1997).Google Scholar
8. Luo, X., Zha, C. and Luther-Davies, B., Mat. Res. Soc. Symp. Proc. 780, 169–174 (2003).Google Scholar
9. Atkins, G.R., in 25th Australian Conference on Optical Fibre Technology, ACOFT Proceedings, 141–143 (2000)Google Scholar
10. Soppera, O., Croutxé-Barghorn, C., and Lougnot, D.J., New J. Chem. 8, 1006–1014 (2001).Google Scholar
11. Gbureck, U., Probst, J., and Thull, R., J. Sol-Gel Sci. Tech., 27, 157–162 (2003).Google Scholar