Hostname: page-component-7bb8b95d7b-pwrkn Total loading time: 0 Render date: 2024-10-02T16:24:12.789Z Has data issue: false hasContentIssue false
  • English
  • Français

Sintering Behavior and Mechanical Properties of Hydroxyapatite-Zirconia Composites

Published online by Cambridge University Press:  15 February 2011

Viviane V. Silva  and
Rosana Z. Domingues
Viviane V. Silva
Affiliation:
Laboratório de Novos Materiais, Departamento de Quimica/ICEx/UFMG, Belo Horizonte, MG Brazil, 31270-901ro.sanazd @dedahlus.loc.ufing.br
Rosana Z. Domingues
Affiliation:
Laboratório de Novos Materiais, Departamento de Quimica/ICEx/UFMG, Belo Horizonte, MG Brazil, 31270-901ro.sanazd @dedahlus.loc.ufing.br
Get access

Abstract

The elaboration of composite materials has been considered one possibility to improve mechanical properties of bioactive phases based on hydroxyapatite used for medical implants. Ceramic and polymeric materials have been tested as the other phase. The aim of this study is to evaluate the sintering behavior and the mechanical properties (compressive strength, modulus of resiliency and microhardness) of hydroxyapatite-zirconia (ZH) composites prepared by precipitation method. Powders of hydroxyapatite-zirconia (ZH) composites, with 40 vol % of zirconia content, and pure hydroxyapatite (HA) as well as pure ZrO2- CaO (ZO) were sintered at 900, 1100 and 1200°C in air at a pressure of 700 MPa for 3 hours, using uniaxial pressing. The products obtained at 1100 and 12000 C are dense, with density values over 91% of the theoretical ones. Experimental results indicated that the sinterization process can be described as admitting a bi-modal structure for ZH composites consisting of a sphere of ZO embedded into a matrix of HA. In this structure the matrix is consider to sinter faster. Intermediate values (between those of pure phases of HA and ZO) of compressive strength and modulus of resiliency were found for ZH composites, suggesting that these composites have potential applications as implant materials.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 550: Symposium GG/HH/II – Biomedical Materials-Drug Delivery, Implants and Tissue Engr , 1998 , 261
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. De With, G., Dijk, H.J.A., Hattu, N., Prijs, K., J. Mater. Sci. 16, p. 1592–1598 (1981).Google Scholar
2. Evans, A.G. in Science and Technology of Zirconia II, Advances in Ceramics, edited by Claussen, N., Ruhle, M. and Heuer, A.H. (American Ceramic Society, Columbus 2, OH, USA 1984), p.193–212.Google Scholar
3. Silva, V. V., Domingues, R. Z., J. Mater. Sci. Mater. Med. 8, p. 907–910 (1997).Google Scholar
4. Silva, V.V., Fernandes, R.Z.D. in Aqueous Chemistry and Geochemistry of Oxides, Oxyhydroxides and Related Materials, edited by Voigt, J.A., Wood, T.E., Bunker, B.C., Casey, W.H. and Crossey, L.J. (Mat. Res. Soc. Symp. Proc. 432, San Francisco, CA 1996) p. 189–194.Google Scholar
5. Santos, A. P., Fernandes, R.Z.D. in Better Ceramics Though Chemistry VI edited by Cheethmam, A. K., Brinker, C.J., Mecartney, M.L. and Sanches, C. (Mat. Res. Soc. Symp. Proc. 346, San Francisco, CA 1994) p.303–307.Google Scholar
6. Raj, R., Bordia, R.K., Acta Metall. 32 (7), p. 1003–1019 (1984).Google Scholar