Hostname: page-component-5c6d5d7d68-qks25 Total loading time: 0 Render date: 2024-08-11T17:14:50.604Z Has data issue: false hasContentIssue false
  • English
  • Français

Sol-gel derived porous silica as a constituent material for designing optical fiber chemical sensors

Published online by Cambridge University Press:  01 February 2011

Shiquan Tao ,
Joseph C. Fanguy  and
Lina Xu
Shiquan Tao
Affiliation:
Diagnostic Instrumentation and Analysis Laboratory, Mississippi State University 205 Research Blvd, Starkville, MS 39759
Joseph C. Fanguy
Affiliation:
Diagnostic Instrumentation and Analysis Laboratory, Mississippi State University 205 Research Blvd, Starkville, MS 39759
Lina Xu
Affiliation:
Diagnostic Instrumentation and Analysis Laboratory, Mississippi State University 205 Research Blvd, Starkville, MS 39759
Get access

Abstract

Sol-gel processes were developed to prepare nano porous silica materials. The obtained porous sol-gel silica (PSGS) materials have been used as constituent materials in designing optical fiber chemical sensors. A PSGS membrane coated on the surface of an optical fiber was used as a transducer for sensing humidity level in air. A PSGS membrane doped with an ammonia indicator dye has been coated on an optical fiber to sense ammonia in air. Both of the coating based sensors are reversible and fast response. In the tested range, relative humidity (RH) in air down to 3% can be detected with the PSGS coated fiber optic sensor. The fiber optic ammonia sensor with ammonia indicator doped PSGS coating can be used to sense ammonia in air down to sub-ppm level. PSGS has also been used as a constituent material in preparing porous silica optical fibers. The obtained porous optical fibers have been used to design optical fiber chemical sensors for sensing humidity, ammonia and volatile organic compounds. A CuCl2 doped PSGS fiber has been tested for sensing ammonia in a high temperature gas sample. Ammonia in the high temperature air gas diffuses into the PSGS fiber, reversibly reacts with CuCl2 doped in the PSGS fiber to form a complex. The formed complex was detected with fiber optic spectrometric method. This sensor can detect ammonia in a high temperature (450 °C) air gas stream down 0.3 ppm. Techniques of preparing PSGS, coating PSGS on an optical fiber, making a porous optical fiber with PSGS as a constituent material will be presented. Examples of optical fiber sensors using PSGS coatings and a PSGS fiber as transducers for gas sensing are presented.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 828: Symposium A – Semiconductor Materials for Sensing , 2004 , A1.9
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Reference:

1. Scott, B. J., Wirnsberger, G. and Stucky, G. D., Chem. Mater., 13, 3140 (2001).Google Scholar
2. Hench, L. L. and West, J. K., Chem. Rev., 90, 33 (1990).Google Scholar
3. Barton, T. J., et al., Chem. Mater., 11, 2633 (1999).Google Scholar
4. Tao, S., Winstead, C. B., Singh, J. P. and Jindal, R., Opt. Lett., 27, 1382 (2002).Google Scholar
5. MacCraith, B. D., McDonagh, C., Mcevoy, A. K., Butler, T., O'Keeffe, G. and Murphy, V., J. Sol-Gel Sci. Technol., 8, 1053 (1997).Google Scholar
6. MacCraith, B. D., McDonagh, C., O'Keeffe, G., Mcevoy, A. K., Butler, T. and Sheridan, F. R., Sens. Actuators, B: Chem., B29, 51 (1995).Google Scholar
7. Tao, S., “Fiber optic chemical sensors for environmental monitoring” in “Encyclopedia of Sensors”, eds. C. A. Grimes, E. C. Dickey and M. V. Pishko, American Scientific Publishers, Stevenson Ranch, CA, in press.Google Scholar
8. Zhou, Q., Shahriari, M. R., Kritz, D. and Sigel, G. H., Anal. Chem., 60, 2317 (1988).Google Scholar
9. Grant, S. A., Bettencourt, K., Krulevitch, P., Hamilton, J. and Glass, R., Sens. Actuators, B: Chem., B72, 174, 2001.Google Scholar
10. Xu, L., Fanguy, J. C., Soni, K. and Tao, S., Opt. Lett., 29, 1191 (2004).Google Scholar