Hostname: page-component-77c89778f8-n9wrp Total loading time: 0 Render date: 2024-07-18T16:19:42.086Z Has data issue: false hasContentIssue false
  • English
  • Français

Structural Properties of Carbon Nitride Films Deposited by Reactive - Pulsed Laser Deposition Technique

Published online by Cambridge University Press:  21 March 2011

A.R. Phani ,
J.E. Krzanowski  and
J.J. Nainaparampil
A.R. Phani
Affiliation:
Department of Mechanical Engineering, University of New Hampshire, Durham, NH
J.J. Nainaparampil
Affiliation:
Systron Inc, Dayton, Ohio
Get access

Abstract

Carbon nitride films have been deposited by the reactive pulsed laser deposition technique by ablating carbon in a nitrogen atmosphere at different substrate temperatures and different background pressures of nitrogen. Si(111) and 440C steel substrates were used in the present investigation. Deposited films are uniform and show good adhesion to the substrates. The deposition rates depend on laser fluence, background pressure, and target-substrate distance. The nitrogen concentration in the deposited films increases with increasing background nitrogen gas pressure and laser fluence. Fourier transform infrared spectroscopy has been employed to evaluated CN bonds. X-ray photoelectron spectroscopy has been used to study the composition of the deposited films. X-ray diffraction and atomic force microscopy techniques revealed that the deposited films have an oriented microcrystalline structure after annealing at 900°C with smooth surface. Electronic, mechanical and tribological properties of these films have also been discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 695: Symposium L – Thin Films: Stresses and Mechanical Properties IX , 2001 , L3.11.1
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Zhang, Z.J., Fa, S., Huang, J., Lieber, C.M., Appl.Phys.Lett. 68 (1996) 2639 Google Scholar
2. Bulir, J., Jelinek, M., Vorlicek, V., Zemek, J., Perina, V., Thin Solid Films, 292 (1997) 318 Google Scholar
3. Hammer, P., Baker, M.A., Lenardi, C., Gissler, W., J.Vac.Sci.Technol. A15 (1997) 107 Google Scholar
4. Hellgren, N., Johnssan, M.P., Broitman, E., Hultman, L., Sundgren, E., Phys.Rev.B 59 (1999) 5162 Google Scholar
5. Bousettea, A., Lu, M., Bensaoula, A., .Vac.Sci.Technol A 13 (1995) 1639 Google Scholar
6. Silva, S.R.P., Robertson, J., Amartunga, G.A.J., Rafferty, B., Brown, L.M., Schwan, J., Franceschini, D.F., Mariottto, J.Apl.Phys. 81 (1997) 2626 Google Scholar
7. Spaeth, C., Kuhn, M., Kreissig, U., Ritcher, F., Diamond Relat.Mater. 6 (1997) 626 Google Scholar
8. Freire, F.L. Jr, Franceshini, D.F., Thin Solid Films 293 (1997) 236 Google Scholar
9. Ivanov, B., Zambov, L., Geogiev, G., Popov, C., Plass, M.F., Kulisch, W., Che.Vap.Depos. 5 (1999) 265 Google Scholar
10. Holloway, B.C., Kraft, O., Shuh, D.K., Kelly, M.A., Nix, W.D., Painetta, P., Hagstrom, S., Appl.Phys.Lett. 74 (1999) 3290 Google Scholar