Hostname: page-component-84b7d79bbc-fnpn6 Total loading time: 0 Render date: 2024-07-31T18:22:57.217Z Has data issue: false hasContentIssue false
  • English
  • Français

Studies of Dielectric Properties of Pulsed Laser Deposited (Ba, Sr)TiO3 Films Using LaNiO3 as Conductive Electrode

Published online by Cambridge University Press:  10 February 2011

Anuranjan Srivastava ,
D. Kumar  and
Rajiv K. Singh
Anuranjan Srivastava
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville, FL 32611-6400
D. Kumar
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville, FL 32611-6400
Rajiv K. Singh
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville, FL 32611-6400
Get access

Abstract

LaNiO3 (LNO) films were used as conductive bottom and top electrodes for the fabrication of (Ba0.5Sr0.5) TiO3 (BST) capacitors on silicon substrates. LNO as well as BST films were grown in-situ using a pulsed laser deposition technique with no subsequent heating or oxygenation treatments. Capacitance and leakage current measurements of BST films were carried out using LNO/BST/LNO/Si structures. Using these measurements, the dielectric constant and leakage current of BST films were found to be ∼250 and ∼10−8 A/cm2, respectively. The results obtained in the present study suggest that LNO is a good contact electrode material for BST films in the fabrication of BST capacitors with good structural and electrical properties.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 541: Symposium O – Ferroelectric Thin Films VII , 1998 , 41
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Yamaguchi, H., Izuka, T., Koga, H., Takemura, K., Sone, S., Yabuta, H., Yamamichi, S., Lesaicherre, P.-Y, Suzuki, M., Kojima, Y., Nakajima, K., Kasai, N., Sakuma, T., Kato, Y., Miyasaka, Y., Yoshida, M. and Nishimoto, S., International Electron Device Meeting 675 (1996).Google Scholar
2 One, S., Yabuta, H., Kato, Y., Lizuka, T., Yamamichi, S., Yamauchi, H., Lesaicherre, P., Nishimoto, S., and Yoshida, M., Jpn. J. Appl. Phys. 35, 5089 (1996).Google Scholar
3 Kingon, A.I., Streiffer, S. K., Basceri, C., and Summerfelt, S. R., MRS Bull. 21, 46 (1996).Google Scholar
4 Tarsa, E. J., McCormick, E. J., and Speck, J. S. in Epitaxial Oxide Thin Films and Heterostructures, (Mater. Res. Soc. Proc. 341, Pittsburgh, PA, 1994) pp.73–85.Google Scholar
5 Numuta, Ken, Fukuda, Yukio, Aoki, Katsuhiro and Nishimura, Akitoshi, Jpn. J. Appl. Phys. 34, 5245 (1995).Google Scholar
6 Hwang, Cheol Seong, Lee, Byong Taek, Kang, Chang Seok, Kim, Jin Won, Lee, Ki Hoon, Cho, Hag-Ju, Horii, Hideki, Kim, Wan Don, Lee, Sang In, and Lee, Moon Yong, J. AppI. Phys. 83, 7, 3703 (1998).Google Scholar
7 Nakamura, T., Nakamura, T., Nakao, Y., Kamisawa, A., and Takasu, H., Jpn. J. Appl. Phys., part1 33, 5207 (1994).Google Scholar
8 Joo, Jae-Hyun, Seon, Jeong-Min, Jeon, Yoo-Chan, Oh, Ki-Young, Roh, Jae-Sung, Kim, Jae-Jeong and Choi, Jin-Tae, Jpn. J. Appl. Phys. 3396 (1998).Google Scholar
9 Ahn, Joon-Hyung, Choi, Won-Youl, Lee, Won-Jae and Kim, Ho-Gi, Jpn. J. Appl. Phys. 37 (1), 284 (1998).Google Scholar
10 Al-Shareef, H. N., Bellur, K. R., Auciello, O. and Kingon, A. I., Thin Solid Films 256 (1995) 73.Google Scholar
11 Ramesh, R., Sands, T., and Keramidas, V. G., J. Electron. Mater. 23, 19 (1994).Google Scholar
12 Chu, Chung Ming and Lin, Pang, Appl. Phys. Lett. 72, 1241 (1998).Google Scholar
13 Saenger, K. L., Grill, A., and Kotecki, D. E., J. Appl. Phys. 83, 802 (1998).Google Scholar
14 Satyalakshmi, K. M., Mallya, R. M., Ramanathan, K. V., Wu, X. D., Brainard, B., Gautier, D. C., Vasanthacharya, N. Y., and Hegde, M. S., Appl. Phys. Lett. 62, 1233 (1993).Google Scholar