Hostname: page-component-68945f75b7-76l5x Total loading time: 0 Render date: 2024-08-06T06:20:57.783Z Has data issue: false hasContentIssue false

A Study of Internal Damage of Metal Matrix Composites by Neutron Diffraction

Published online by Cambridge University Press:  22 February 2011

N. Shi
Affiliation:
Los Alamos National Laboratory, Los Alamos, NM 87545, USA.
M. A. M. Bourke
Affiliation:
Los Alamos National Laboratory, Los Alamos, NM 87545, USA.
J. A. Goldstone
Affiliation:
Los Alamos National Laboratory, Los Alamos, NM 87545, USA.
Get access

Abstract

Using neutron diffraction, we have measured the elastic phase strains of Al/TiC and Al/SiC composites under uniaxial tensile loading. The phase strains were used to reconstruct the global elastic strain. It has been found that, above macroscopic yield, the global elastic strain response is not linear. A theoretical model shows that the nonlinearity is dictated by changes in the ratio of longitudinal phase stresses. Furthermore, the changes in this ratio resulting from matrix plasticity and reinforcement fracture are different which leads to distinct slope changes in the global elastic strain response that can be used to distinguish the onset of these two processes on the global elastic strain loading curve.

Type
Research Article
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Vyletel, G. M., Van Aken, D. C. and Allison, J. E., Scripta Metall. Mater., 25, 2405 (1991).Google Scholar
2 Llorca, J., Martin, A., Ruiz, J. and Elices, M., Metall. Trans., 24A, 1575 (1993).Google Scholar
3 Goldstone, J. A., Bourke, M. A. M. and Shi, N., in this volume.Google Scholar
4 Larson, A. C. and Von Dreele, R. B., Unclassified Report — LAUR-86-748, Los Alamos National Laboratory.Google Scholar
5 Shi, N., Bourke, M. A. M., Goldstone, J. A. and Allison, J. E., submitted for publication.Google Scholar