Hostname: page-component-78c5997874-fbnjt Total loading time: 0 Render date: 2024-11-17T19:36:50.913Z Has data issue: false hasContentIssue false
  • English
  • Français

Sub-Nm Screening Layer Approach for Ultra Shallow Junction Formation

Published online by Cambridge University Press:  10 February 2011

M. Hori ,
T. Miyake ,
K. Hikazutani ,
Y. Kataoka ,
M. Nakamura ,
T. Wada  and
M. Kase
M. Hori
Affiliation:
Fujitsu limited, 1500 Mizono, Tado-cho, Kuwana-gun, Mie 511-0192, Japan.
T. Miyake
Affiliation:
Fujitsu limited, 1500 Mizono, Tado-cho, Kuwana-gun, Mie 511-0192, Japan.
K. Hikazutani
Affiliation:
Fujitsu limited, 1500 Mizono, Tado-cho, Kuwana-gun, Mie 511-0192, Japan.
Y. Kataoka
Affiliation:
Fujitsu limited, 1500 Mizono, Tado-cho, Kuwana-gun, Mie 511-0192, Japan.
M. Nakamura
Affiliation:
Fujitsu limited, 1500 Mizono, Tado-cho, Kuwana-gun, Mie 511-0192, Japan.
T. Wada
Affiliation:
Fujitsu limited, 1500 Mizono, Tado-cho, Kuwana-gun, Mie 511-0192, Japan.
M. Kase
Affiliation:
Fujitsu limited, 1500 Mizono, Tado-cho, Kuwana-gun, Mie 511-0192, Japan.
Get access

Abstract

This paper describes the influence of the sub-nm screening and capping oxide layer of wet process on B diffusion for 50 nm shallow junction formation. The reason is proposed that the knock-on oxygen into Si makes B diffusion faster such as in the case of oxidation enhanced diffusion. To suppress the B enhanced diffusion, the screening oxide formed before implant should be thin to reduce the knock-on oxygen. The wet process before annealing strongly influences the B diffusion, in particular, thicker capping oxide with sub-oxide structure and knock-on oxygen has an important rule for the enhanced diffusion.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 568: Symposium S – Silicon Front-End Processing-Physics & Technology of Dopant… , 1999 , 15
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Goto, K., Kase, M., Momiyama, Y., Kurata, H., Tanaka, T., Deura, M., Sanbonsugi, Y., and Sugii, T., IEDM Tech. Dig., p.22.5 (1998)Google Scholar
2. Agarwal, A., Eagleshai, D. J., Grossman, H. J., Pelaz, L., Hemer, S. B., Jacobson, D. C., Haynes, T. E., Erokin, Y., and Simonton, R., IEDM Tech. Dig., p. 167 (1997)Google Scholar
3. Downey, D. F, Brown, D., Bertuch, A., Ishida, E., and C-H, Ng, Proc. 12th Int. Conf. on Ion Implantation Technology, (1998) to be published.Google Scholar
4. Shishiguchi, S., Mineji, A., Yasunaga, T., and Saito, S., VLSI Tech. Symp., p. T. 12.4 (1998)Google Scholar
5. Kase, M., Kikuchi, Y., Kubo, T., Niwa, H., and Fukuda, T., Proc. 12th Int. Conf. on Ion Implantation Technology, (1998) to be published.Google Scholar