Hostname: page-component-5c6d5d7d68-xq9c7 Total loading time: 0 Render date: 2024-09-01T07:24:06.930Z Has data issue: false hasContentIssue false
  • English
  • Français

Tribology of Amorphous Alloys Formed With Ion Beams

Published online by Cambridge University Press:  25 February 2011

D. M. Follstaedt ,
J. A. Knapp  and
L. E. Pope
D. M. Follstaedt
Affiliation:
Sandia National Laboratories, Albuquerque, NM 87185-5800
J. A. Knapp
Affiliation:
Sandia National Laboratories, Albuquerque, NM 87185-5800
L. E. Pope
Affiliation:
Sandia National Laboratories, Albuquerque, NM 87185-5800
Get access

Abstract

The changes in friction and wear properties (i.e., tribology) of steels due to thin surface alloys formed by ion beams are surveyed, and considered in light of their microstructures. Amorphous alloys containing both Ti and C are found to give superior performance in comparison to alloys with N, B, C, P or Ti. All the amorphous layers reduce friction, but the duration of benefits and wear resistance at high loads vary with composition. By examining similar amorphous alloys with Ti alone or C alone, the critical roles played by each in resisting wear are demonstrated. Amorphous alloys with Ti and C appear to be quite hard.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 128: Symposium A – Processing and Characterization of Materials Using Ion Beams , 1988 , 389
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Clayton, C. R., in Surface Alloying by Ion. Electron and Laser Beams eds. Rehn, L. E., Picraux, S. T. and Wiedersich, H. (ASM, Metals Park, Ohio, 1987), p. 325.Google Scholar
2. Hubler, G. K., in Surface Alloying by Ion, Electron and Laser Beams, eds. Rehn, L. E., Picraux, S. T. and Wiedersich, H. (ASM, Metals Park, Ohio, 1987), p. 287.Google Scholar
3. Pope, L. E., Yost, F. G., Follstaedt, D. M., Knapp, J. A. and Picraux, S. T., in Wear of Materials 1983, ed. Ludema, K. C. (ASME, New York, 1983) p. 280.Google Scholar
4. Hirvonen, J. K., Mat. Res. Soc. Symp. Proc. 27, 621 (1984).10.1557/PROC-27-621CrossRefGoogle Scholar
5. Sioshansi, P., Mat. Sci. Eng. 90, 373 (1987).10.1016/0025-5416(87)90235-7CrossRefGoogle Scholar
6. Ng, L. and Naerheim, Y., 1987 Ball Bearing Technical Symposium, Orlando FL, 1987.Google Scholar
7. Liau, Z. L. and Mayer, J. W., J. Vac. Sci. Tech. 15, 1629 (1978).10.1116/1.569820Google Scholar
8. Follstaedt, D. M., Knapp, J. A. and Pope, L. E., submitted to Nucl. Inst. Meth. B.Google Scholar
9. Farkas, D., Singer, I. L. and Rangaswamy, M., Mat. Res. Soc. Symp. Proc. 27, 609 (1984).10.1557/PROC-27-609Google Scholar
10. Picraux, S. T., Ann. Rev. Mat. Sci. 14, 335 (1984).10.1146/annurev.ms.14.080184.002003Google Scholar
11. Armini, A., in Industrial Heating, January 1986, p. 17.Google Scholar
12. Yost, F. G., Pope, L. E., Follstaedt, D. M., Knapp, J. A. and Picraux, S. T., Thin Solid Films 107, 287 (1983).10.1016/0040-6090(83)90408-XGoogle Scholar
13. Carosella, C.A., Singer, I.L., Bowers, R.C., and Gossett, C.R., in Ion Implantation Metallurgy, eds. Preece, C.M. and Hirvonen, J.K. (TMS-AIME, Warrendale, PA, 1980) p. 103.Google Scholar
14. Pope, L. E., Yost, F. G., Follstaedt, D. M., Picraux, S. T. and Knapp, J. A., Mat. Res. Soc. Symp. Proc. 27, 661 (1984).10.1557/PROC-27-661CrossRefGoogle Scholar
15. Kluge, A., Langguth, K., Ochsner, R., Kobs, K. and Ryssel, H., Proc. IBMM88, Tokyo, Japan, June 1988, to appear in Nuclear Instruments and Methods (preprint).Google Scholar
16. Doyle, B. L., Yost, F. G., Picraux, S. T., Follstaedt, D. M., Pope, L. E. and Knapp, J. A., Nucl. Inst. Meth. B7,8, 38 (1985).Google Scholar
17. Vardiman, R. G. and Singer, I. L., Mat. Lett. 2, 150 (1983).10.1016/0167-577X(83)90058-7CrossRefGoogle Scholar
18. Rauschenbach, B. and Kolitsch, A., Phys. Stat. Sol. (a) 80, 211 (1983).10.1002/pssa.2210800123Google Scholar
19. Hohmuth, K., Rauschenbach, B., Kolitsch, A. and Richter, E., Nucl. Inst. Meth. 209/210, 249 (1983).10.1016/0167-5087(83)90808-6CrossRefGoogle Scholar
20. 1. Singer, L., Carosella, C. A. and Reed, J. R., Nucl. Inst. Meth. 182/183, 923 (1981).10.1016/0029-554X(81)90823-5Google Scholar
21. Follstaedt, D. M., Yost, F. G., Pope, L. E., Picraux, S. T. and Knapp, J. A., Appl. Phys. Lett. 43, 358 (1983).10.1063/1.94336Google Scholar
22. Follstaedt, D. M., Yost, F. G. and Pope, L. E., Mat. Res. Soc. Symp. Proc. 27, 655 (1984).10.1557/PROC-27-655Google Scholar
23. Follstaedt, D. M., Nucl. Inst. Meth. B10/11, 549 (1985).10.1016/0168-583X(85)90306-4Google Scholar
24. Follstaedt, D. M., Pope, L. E. and Knapp, J. A., to be published.Google Scholar
25. Kant, R.A., Sartwell, B.D., Singer, I.L. and Vardiman, R.G., Nucl. Inst. Meth. 137/8, 915 (1985).10.1016/0168-583X(85)90494-XCrossRefGoogle Scholar
26. Pope, L. E., Follstaedt, D. M., Knapp, J. A. and Barbour, J. C., Mat. Res. Soc. Symp. Proc. 100, 175 (MRS, Pittsburgh, 1988).Google Scholar
27. Pope, L. E., Knapp, J. A. and Follstaedt, D. M., Thin Solid Films, to be published.Google Scholar
28. Fischer, T. E., Luton, M. J., Williams, J. M., White, C. W. and Appleton, B. R., ASLE Trans. 26, 466 (1983).10.1080/05698198308981527Google Scholar
29. Hubler, G.K., Trzaskoma, P., McCafferty, E. and Singer, I.L., in Ion Implantation into Metals, eds. Ashworth, V., Grant, W.A. and Proctor, R.P.M., (Pergamon, New York, 1982), p. 24.10.1016/B978-0-08-027625-0.50008-3Google Scholar
30. Knapp, J. A., Follstaedt, D. M. and Doyle, B. L., Nucl. Inst. Meth. B7/8, 38 (1985).10.1016/0168-583X(85)90526-9Google Scholar
31. Hirvonen, J-P., Nastasi, M. and Mayer, J. W., J. Appl. Phys. 60, 980 (1986).10.1063/1.337341CrossRefGoogle Scholar
32. Follstaedt, D.M., Knapp, J.A., Pope, L.E. and Picraux, S.T., Nucl. Inst. Meth. B12, 359 (1985).10.1016/0168-583X(85)90034-5Google Scholar
33. Knapp, J. A., Follstaedt, D. M. and Picraux, S. T., in Ion Implantation Metallurgy, ed. Preece, C. M. and Hirvonen, J. K. (TMS-AIME, Warrendale, PA, 1980) p. 152.Google Scholar
34. Follstaedt, D. M., Knapp, J. A. and Picraux, S. T., Appl. Phys. Lett. 37, 330 (1980).10.1063/1.91893Google Scholar
35. Singer, I. L. and Barlak, T. M., Appl. Phys. Lett. 43, 457 (1983).10.1063/1.94387Google Scholar
36. Follstaedt, D. M., Knapp, J. A., Pope, L. E., Yost, F. G. and Picraux, S. T., Appl. Phys. Lett. 45, 529 (1984); erattum, 46, 207 (1985).10.1063/1.95303Google Scholar
37. Dillich, S. A. and Biederman, R. R., Mat. Sci. Eng. 90, 91 (1987).10.1016/0025-5416(87)90199-6Google Scholar
38. Dillich, S. A. and Singer, I. L., Thin Solid Films 73, 219 (1981).Google Scholar
39. Dillich, S. A., Bolster, R. N. and Singer, I. L., Mat. Res. Soc. Symp. Proc. 27, 637 (1984).10.1557/PROC-27-637Google Scholar
40. Gately, N. V. H. and Dillich, S. A., Mat. Sci. Eng. 90, 333 (1987).10.1016/0025-5416(87)90229-1Google Scholar
41. Mullendore, A. W., Pope, L. E., Hays, A. K., Nelson, G. C., Hills, C. R. and LeFevre, B. G., submitted to Thin Solid Films.Google Scholar
42. Mayer, J. W., Tsaur, B. Y., Lau, S. S. and Hung, L-S., Nucl. Inst. Meth. 182/183, 1 (1981).10.1016/0029-554X(81)90666-2Google Scholar
43. Hirvonen, J-P., Nastasi, M. and Mayer, J. W., Appl. Phys. Lett. 51, 232 (1987).10.1063/1.98458Google Scholar
44. Hirvonen, J-P., Nastasi, M. and Mayer, J. W., Appl. Phys. Lett. 49, 1345 (1986).10.1063/1.97373CrossRefGoogle Scholar
45. Hirvonen, J-P., Nastasi, M. and Mayer, J. W., Mat. Res. Soc. Symp. Proc. 93, 335 (1987).10.1557/PROC-93-335CrossRefGoogle Scholar
46. Hirvonen, J-P., Nastasi, M., Phillips, J.R. and Mayer, J.W., J. Vac. Sci. Tech. A4, 2997 (1986).10.1116/1.573614Google Scholar
47. Brimhall, J. L., Kissinger, H. E. and Charlot, L. A., Rad. Eff. 77, 237 (1983).Google Scholar
48. Follstaedt, D. M., Pope, L. E., Knapp, J. A., Picraux, S. T. and Yost, F. G., Thin Solid Films, 107, 259 (1983).10.1016/0040-6090(83)90405-4Google Scholar
49. Nastasi, M. and Hirvonen, J-P., unpublished results.Google Scholar
50. Moine, P., 0. Popoola and Villain, J. P., Scripta Met. 20, 305 (1986).10.1016/0036-9748(86)90148-1CrossRefGoogle Scholar
51. Zheng, L. R., Hung, L. S. and Mayer, J. W., accepted by J. Appl. Phys.Google Scholar
52. Zheng, L. R., Hung, L. S. and Mayer, J. W., accepted by Mat. Lett.Google Scholar
53. Moine, P., Riviere, J.P., Junqua, N. and Delafond, J., Mat. Res. Soc. Symp. Proc. 7, 243 (1982).10.1557/PROC-7-243Google Scholar
54. Follstaedt, D. M. and Knapp, J. A., Mat. Res. Soc. Symp. Proc. 51, 473 (1986).10.1557/PROC-51-473Google Scholar
55. Follstaedt, D. M., Knapp, J. A. and Peercy, P. S., J. Non-Cryst. Sol. 61&62, 451 (1984).10.1016/0022-3093(84)90590-8Google Scholar
56. Nastasi, M., Hirvonen, J-P., Jervis, T.R., Pharr, G.M. and Oliver, W.C., J. Mat. Res. 3, 226 (1988).10.1557/JMR.1988.0226Google Scholar
57. Pope, L. E., Picraux, S. T., Follstaedt, D. M., Knapp, J. A. and Yost, F. G., J. Mat. Energy Sys. 7, 27 (1985).10.1007/BF02833542CrossRefGoogle Scholar
58. Hirano, M. and Miyake, S., in Proceedings of the Japan Society of Lubrication Engineers International Tribology Conference, Tokyo, 1985 (Elsevier, Amsterdam, 1985), p. 245.Google Scholar
59. Hirano, M. and Miyake, S., Tribology, J., Trans. ASME 107, 467 (1985).10.1115/1.3261110Google Scholar
60. Hirano, M. and Miyake, S., Appl. Phys. Lett. 52, 1469 (1988).10.1063/1.99101CrossRefGoogle Scholar
61. Ali, A., Grant, W. A. and Grundy, P. J., Phil. Mag. B 37, 353 (1978).10.1080/01418637808227676CrossRefGoogle Scholar
62. Singer, I. L. and Hafterson, K. J., Naval Research Laboratory Memorandum Report 5512, January 30, 1985, Washington, D.C.Google Scholar
63. Hirano, M. and Miyake, S., Intl. Conf. on Ion Beam Modification of Materials, June, 1988, Tokyo, Japan; to be published in Nuclear Instruments and Methods (preprint).Google Scholar
64. Oliver, W. C., Hutchings, R., Pethica, J. B., Singer, I. L. and Hubler, G. K., Mat. Res. Soc. Symp. Proc. 27, 603 (1984).10.1557/PROC-27-603Google Scholar
65. Singer, I. L., Bolster, R. N. and Carosella, C. A., Thin Solid Films 23, 283 (1980).10.1016/0040-6090(80)90491-5Google Scholar
66. Bolster, R. N. and Singer, I. L., ASLE Trans. 24, 526 (1981).10.1080/05698198108983052Google Scholar
67. Inoue, A., Iwadachi, T., Minemura, T. and Matsumato, T., Trans. Jap. Inst. Met. 22, 197 (1981).10.2320/matertrans1960.22.197Google Scholar
68. Singer, I. L., Mat. Res. Soc. Symp. Proc. 27, 585 (1984).10.1557/PROC-27-585Google Scholar
69. Matsumoto, T. and Maddin, R., Met. Sci. Engr. 19, 1 1975.10.1016/0025-5416(75)90002-6Google Scholar
70. Singer, I. L., Appl. Surf. Sci. 18, 28 (1984).10.1016/0378-5963(84)90037-0Google Scholar
71. Hubler, G. K., Singer, I. L. and Clayton, C. R., Mat. Sci. Eng. 69, 203 (1985).10.1016/0025-5416(85)90392-1Google Scholar
72. Sioshansi, P., 6th Intl. Conf. on Ion Beam Modification of Materials, 6/88, Tokyo, Japan.Google Scholar
73. Conrad, J. R., J. Appl. Phys. 62, 777 (1987); J. R. Conrad, J. L. Radtke, R. A. Dodd, F. J. Worzala and Ngoc C. Tran, J. Appl. Phys. 62, 4591 (1987).10.1063/1.339858Google Scholar
74. Barton, B., private communication.Google Scholar