Hostname: page-component-5c6d5d7d68-sv6ng Total loading time: 0 Render date: 2024-08-21T14:08:27.687Z Has data issue: false hasContentIssue false
  • English
  • Français

Variations in Mechanical Properties of Wood Plates Due Fluctuations on Relative Humidity of Air

Published online by Cambridge University Press:  31 January 2012

J. A. Torres ,
M. De Icaza  and
R. R. Boullosa
J. A. Torres
Affiliation:
Centro de Física Aplicada y Tecnología Avanzada, Universidad Nacional Autónoma de México Campus Juriquilla, Querétaro, México CP76230. E-mail: jesusalejandrott@yahoo.com.mx
M. De Icaza
Affiliation:
Centro de Física Aplicada y Tecnología Avanzada, Universidad Nacional Autónoma de México Campus Juriquilla, Querétaro, México CP76230. E-mail: jesusalejandrott@yahoo.com.mx
R. R. Boullosa
Affiliation:
Laboratorio de Acústica Aplicada y Vibraciones, Centro de Ciencias Aplicadas y Desarrollo Tecnológico, Universidad Nacional Autónoma de México, Cd. Universitaria México CP 04370.
Get access

Abstract

Often, mechanical properties of wood plates are accurately approximated through orthotropic characterization. However, the numerical values may show considerable variations in the case of real wood plates immersed in fluctuant environmental conditions, especially if the relative humidity of air (RH) is changing. Problems arising from the natural variations in RH have been reported on making musical instruments. In this work, the influence of changing RH on the mechanical properties of a guitar’s top plate (clamped on its contour) has been measured. Vibratory responses of the plate were experimentally obtained, through forced vibration, while data were recorded for several RH values, without any alteration in the experimental set-up devices. The six lowest natural frequencies of the structure were extracted from peaks detected in the responses. Natural frequencies depend on mass distribution and mechanical properties of the structure. For the highest sensed RH (67 %), each natural frequency of the plate decreased at least in 11 Hz compared with reference values measured at the lowest sensed RH (53 %). To determine the connection between the shift in natural frequencies and the changes in the wood elastic and shear modulus, a finite element model of the plate was performed. It was useful calculating natural frequencies through simulated modal analyses. Elastic and shear modulus were handled to match simulated results with experimental natural frequencies recorded for a RH=53% level. These elastic moduli must be decreased around 10 % to obtain a similar frequency decrease in the experimental natural frequencies obtained under a RH=67% level. The experimental results show quantitative information on an interaction scarcely researched, that is, the modification on mechanical properties of wood plates induced by RH variations. Sensed changes due this wood-air interaction are responsible of a modification in the behavior of musical instruments, as guitars and violins.

Keywords

AcousticElastic propertiesStructural
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1372: Symposium S3 – Structural and Chemical Characterization of Metal Alloys and Compounds—2011 , 2012 , imrc-1372-s3-07
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Bucur, V., Acoustics of Wood, ed. CRC press, (1995) pp. 158–159.Google Scholar
2. Hutchins, C., C.A.S. Newsletter. #37, Reprinted in CAS J 4, 1 (2002).Google Scholar
3. Thompson, R., C.A.S. Newsletter #32 , Reprinted in CAS J 4, 1 (2000).Google Scholar
4. Thompson, R., C.A.S. J. 4, 6 (2002).Google Scholar
5. French, M., Engineering the Guitar: Theory and Practice, ed.Springer, (2009).2011).Google Scholar
6. Gore, T., Proc. Meet. Acoust. 12 (2011)Google Scholar
7. Ewins, J., Modal Testing: Theory and Practice, ed. Research Studies press (1984) pp. 157–158.Google Scholar
8. Wangaard, F. F. (1950), The Mechanical Properties of Wood, ed. John Wiley and Sons, (1950) pp. 18–21.Google Scholar
9. Deobald, L. R., Gibson, R. F., J. Sound Vib. 2, 124 (1988).Google Scholar
10. Torres, J. A., Boullosa, R. R., App. Acoust. 70, 11–12 (2009).Google Scholar
11. Torres, J. A., Rendon, P. L., Boullosa, R. R., J. App. Res. Tech. 8, 1 (2010).Google Scholar
12. Torres, J. A., Boullosa, R. R., J. Acoust. Soc. Am. 130, 1 (2011).Google Scholar
13. Ezcurra, A., J. Sound. Vib. 4, 194 (1996).Google Scholar