Hostname: page-component-7479d7b7d-qs9v7 Total loading time: 0 Render date: 2024-07-12T18:33:23.732Z Has data issue: false hasContentIssue false
  • English
  • Français

Vibrating RF MEMS for Low Power Communications

Published online by Cambridge University Press:  11 February 2011

Clark T.-C. Nguyen
Clark T.-C. Nguyen*
Affiliation:
Center for Integrated Wireless Microsystems, Department of Electrical Engineering and Computer Science, University of Michigan, Ann Arbor, Michigan 48109–2122, U.S.A.
Get access

Abstract

Micromechanical communication circuits fabricated via IC-compatible MEMS technologies and capable of low-loss filtering, mixing, switching, and frequency generation, are described with the intent to miniaturize wireless transceivers. Possible transceiver front-end architectures are then presented that use these micromechanical circuits in large quantities to substantially reduce power consumption. Technologies that integrate MEMS and transistor circuits into single-chip systems are then reviewed with an eye towards the possibility of single-chip communication transceivers.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 741: Symposium J – Nano- and Microelectromechanical Systems (NEMS and MEMS) and Molecular Machines , 2002 , J12.1
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Nguyen, C. T.-C., Katehi, L.P.B., and Rebeiz, G. M., “Micromachined devices for wireless communications (invited),” Proc. IEEE, Vol. 86, no. 8, pp. 1756–1768, Aug. 1998.Google Scholar
[2] Core, T. A., Tsang, W. K., Sherman, S. J., “Fabrication technology for an integrated surface-micromachined sensor,” Solid State Technology, pp. 39–47, Oct. 1993.Google Scholar
[3] Smith, J. H., Montague, S., Sniegowski, J. J., Murray, J. R., et al., “Embedded micromechanical devices for the monolithic integration of MEMS with CMOS,” Tech. Digest, IEEE Int. Electron Devices Meeting (IEDM), Washington, D.C., Dec. 10–13, 1995, pp. 609–612.Google Scholar
[4] Bustillo, J. M., Fedder, G. K., Nguyen, C. T.-C., and Howe, R. T., “Process technology for the modular integration of CMOS and polysilicon microstructures,” Microsystem Technologies, 1 (1994), pp. 30–41.Google Scholar
[5] Franke, A. E., Bilic, D., Chang, D. T., Jones, P. T., King, T.-J., Howe, R. T., and Johnson, G. C., “Post-CMOS integration of germanium microstructures,” Technical Digest, 12th Int. IEEE MEMS Conf., Orlando, FA, Jan. 17–21, 1999, pp. 630–637.Google Scholar
[6] Baltes, H., Paul, O., and Brand, O., “Micromachined thermally based CMOS microsensors,” Proc. IEEE, Vol. 86, no. 8, pp. 1660–1678, Aug. 1998.Google Scholar
[7] Fedder, G. K., Santhanam, S., Reed, M. L., Eagle, S. C., Guillou, D. F., Lu, M. S.-C., and Car-ley, L. R., “Laminated high-aspect-ratio microstructures in a conventional CMOS process,” Sensors and Actuators, vol. A57, no. 2, pp. 103–110, March 1997.Google Scholar
[8] Wong, A.-C., Xie, Y., and Nguyen, C. T.-C., “A bonded-micro-platform technology for modular merging of RF MEMS and transistor circuits,” to be published in the Digest of Technical Papers, the 11th Int. Conf. on Solid-State Sensors & Actuators (Transducers'01), Munich, Germany, June 10–14, 2001 (4 pages).Google Scholar
[9] Nguyen, C. T.-C., “Micromechanical circuits for communication transceivers (invited),” Proceedings, 2000 Bipolar/BiCMOS Circuits and Technology Meeting (BCTM), Minneapolis, Minnesota, September 25–26, 2000, pp. 142–149.Google Scholar
[10] Nguyen, C. T.-C., “Transceiver front-end architectures using vibrating micromechanical signal processors,” chapter in RF Technologies for Low Power Wireless Communications, edited by Haddad, G. I., Itoh, T., and Harvey, J. (35 pages). New York: Wiley IEEE-Press, 2001.Google Scholar
[11] Bustillo, J. M., Howe, R. T., and Muller, R. S., “Surface micromachining for microelectromechan-ical systems (invited),” Proc. IEEE, Vol. 86, no. 8, pp. 1552–1574, Aug. 1998.Google Scholar
[12] Nguyen, C. T.-C. and Howe, R. T., “An integrated CMOS micromechanical resonator high-Q oscillator,” IEEE J. Solid-State Circuits, Vol. 34, no. 4, pp. 440–445, April 1999.Google Scholar
[13] Hsu, W. -T. and Nguyen, C. T. -C., “Stiffness-compensated temperature-insensitive microme-chanical resonators,” Tech. Digest, 2002 IEEE Int. Micro Electro Mechanical Systems Conf., Las Vegas, Nevada, Jan. 20–24, 2002, pp. 731–734.Google Scholar
[14] Bannon, F. D. III, Clark, J. R., and Nguyen, C. T.-C., “High frequency micromechanical filters,” IEEE J. Solid-State Circuits, Vol. 35, no. 4, pp. 512–526, April 2000.Google Scholar
[15] Meng, Q., Mehregany, M., and Mullen, R. L., “Theoretical modelling of microfabricated beams with elastically restrained supports,” J. Microelectromech. Syst., Vol. 2, no. 3, pp. 128–137, Sept. 1993.Google Scholar
[16] Cleland, A. N. and Roukes, M. L., “Fabrication of high frequency nanometer scale mechanical resonators from bulk Si crystals,” Appl. Phys. Lett., 69 (18), pp. 2653–2655, Oct. 28, 1996.Google Scholar
[17] Vig, J. R. and Kim, Y., “Noise in microelectromechanical system resonators,” IEEE Trans. Utra-son. Ferroelec. Freq. Contr., Vol. 46, no. 6, pp. 1558–1565, Nov. 1999.Google Scholar
[18] Navid, R., Clark, J. R., Demirci, M., and Nguyen, C. T.-C., “Third-order intermodulation distortion in capacitively-driven CC-beam micromechanical resonators,” Technical Digest, 14th Int. IEEE Micro Electro Mechanical Systems Conference, Interlaken, Switzerland, Jan. 21–25, 2001, pp. 228–231.Google Scholar
[19] Nguyen, C. T.-C., “Frequency-selective MEMS for miniaturized low-power communication devices,” IEEE Trans. Microwave Theory Tech., Vol. 47, no. 8, pp. 1486–1503, Aug. 1999.Google Scholar
[20] Wang, K., Wong, A.-C., and Nguyen, C. T.-C., “VHF free-free beam high-Q micromechanical resonators,” IEEE/ASME J. Microelectromech. Syst., Vol. 9, no. 3, pp. 347–360, Sept. 2000.Google Scholar
[21] Clark, J. R., Hsu, W.-T., and Nguyen, C. T.-C., “High-Q VHF micromechanical contour-mode disk resonators,” Technical Digest, IEEE Int. Electron Devices Meeting, San Francisco, California, Dec. 11–13, 2000, pp. 399–402.Google Scholar
[22] Wang, J. and Nguyen, C. T.-C., to be published.Google Scholar
[23] Hsu, W.-T., Clark, J. R., and Nguyen, C. T.-C., “A sub-micron capacitive gap process for multiple-metal-electrode lateral micromechanical resonators,” Technical Digest, 14th Int. IEEE Micro Electro Mechanical Systems Conference, Interlaken, Switzerland, Jan. 21–25, 2001, pp. 349–352.Google Scholar
[24] Wong, A.-C., Clark, J. R., and Nguyen, C. T.-C., “Anneal-activated, tunable, 68MHz microme-chanical filters” Digest of Technical Papers, 10th Int. Conf. on Solid-State Sensors and Actuators, Sendai, Japan, June 7–10, 1999, pp. 1390–1393.Google Scholar
[25] Wong, A.-C., Ding, H., and Nguyen, C. T.-C., “Micromechanical mixer+filters,” Tech. Digest, IEEE Int. Electron Devices Meeting (IEDM), San Francisco, California, Dec. 6–9, 1998, pp. 471–474.Google Scholar
[26] Goldsmith, C., Randall, J., Eshelman, S., Lin, T. H., Denniston, D., Chen, S. and Norvell, B., “Characteristics of micromachined switches at microwave frequencies,” IEEE MTT-S Digest, pp. 1141–1144, June, 1996.Google Scholar
[27] Young, D. J. and Boser, B. E., “A micromachined variable capacitor for monolithic low-noise VCOs,” Technical Digest, 1996 Solid-State Sensor and Actuator Workshop, Hilton Head Island, South Carolina, June 3–6, 1996, pp. 86–89.Google Scholar
[28] Yoon, J.-B., Han, C.-H., Yoon, E., and Kim, C.-K., “Monolithic high-Q overhand inductors fabricated on silicon and glass substrates,” Technical Digest, IEEE IEDM, Washington, D. C., Dec. 5–8, 1999, pp. 753–756.Google Scholar
[29] Singh, A., Horsley, D. A., Cohn, M. B., Pisano, A. P., and Howe, R. T., “Batch transfer of microstructures using flip-chip solder bonding,” J. Microelectromech. Syst., Vol. 8, no. 1, pp. 27–33, March 1999.Google Scholar
[30] Wang, J., Butler, J. E., Hsu, D. S. Y., and Nguyen, C. T.-C., “High-Q micromechanical resonators in CH4-reactant-optimized high acoustic velocity CVD polydiamond,” Tech. Digest, 2002 Solid-State Sensor, Actuator, and Microsystems Workshop, Hilton Head, South Carolina, June 2–6, 2002, pp. 61–62.Google Scholar
[31] Lebouitz, K. S., Mazaheri, A., Howe, R. T., and Pisano, A. P., “Vacuum encapsulation of resonant devices using permeable polysilicon,” Technical Digest, 12th Int. IEEE MEMS Conf., Orlando, Florida, Jan. 17–21, 1999, pp. 470–475.Google Scholar
[32] Cheng, Y.-T., Hsu, W.-T., Lin, L., Nguyen, C. T.-C., and Najafi, K., “Vacuum packaging using localized aluminum/silicon-to-glass bonding,” Technical Digest, 14th Int. IEEE Micro Electro Mechanical Systems Conference, Interlaken, Switzerland, Jan. 21–25, 2001, pp. 18–21.Google Scholar