Hostname: page-component-7bb8b95d7b-qxsvm Total loading time: 0 Render date: 2024-09-14T09:05:55.034Z Has data issue: false hasContentIssue false

Adsorption of Hydrogen on Carbon Single-Walled Nanotubes as Measured by the Volumetric Technique

Published online by Cambridge University Press:  15 March 2011

Philip A. Parilla
Affiliation:
Basic Sciences Center, National Renewable Energy Laboratory Golden, CO, 80401, U.S.A.
Anne C. Dillon
Affiliation:
Basic Sciences Center, National Renewable Energy Laboratory Golden, CO, 80401, U.S.A.
Thomas Gennett
Affiliation:
Department of Chemistry and Center for Materials Science, Rochester Institute of Technology, Rochester, NY, 14623, U.S.A.
Jeff L. Alleman
Affiliation:
Basic Sciences Center, National Renewable Energy Laboratory Golden, CO, 80401, U.S.A.
Kim M. Jones
Affiliation:
Basic Sciences Center, National Renewable Energy Laboratory Golden, CO, 80401, U.S.A.
Michael J. Heben
Affiliation:
Basic Sciences Center, National Renewable Energy Laboratory Golden, CO, 80401, U.S.A.
Get access

Abstract

We report on hydrogen adsorption onto carbon single-walled nanotube (SWNT) material as measured by the volumetric technique. This method determines the amount adsorbed by monitoring the pressure in a known volume at a known temperature with a given number of moles of hydrogen introduced. The raw material for the samples is produced by pulsed laser vaporization of a graphite target containing Ni (0.6 at%) and Co (0.6 at%) dopants. This is followed with a purification procedure and then by a cutting procedure. Finally, the sample is degassed before the hydrogen adsorption is measured. The cutting procedure introduces a titanium alloy which participates in the overall hydrogen adsorption of the SWNT material. Importantly though, the amount of hydrogen adsorbed in the SWNT material cannot be explained by absorption from the alloy alone. A description of the apparatus that has allowed us to measure these samples is given and we discuss crucial experimental procedures needed to activate the SWNT samples for hydrogen adsorption.

Type
Research Article
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Dillon, A. C., Jones, K. M., Bekkedahl, T. A., Kiang, C. H., Bethune, D. S. and Heben, M. J., Nature 386, 377 (1997).Google Scholar
2. Chen, P., Wu, X., Lin, J. and Tan, K. L., Science 285, 91 (1999).Google Scholar
3. Lee, S. M., Park, K. S., Choi, Y. C., Park, Y. S., Bok, J. M., Bae, D. J., Nahm, K. S., Choi, Y. G., Yu, S. C., Kim, N. G., Frauenheim, T. and Lee, Y. H., Synthetic Metals 113, 209 (2000).Google Scholar
4. Liu, C., Fan, Y. Y., Liu, M., Cong, H. T., Cheng, H. M. and Dresselhaus, M. S., Science 286, 1127 (1999).Google Scholar
5. Wu, X. B., Chen, P., Lin, J. and Tan, K. L., International Journal of Hydrogen Energy 25, 261 (2000).Google Scholar
6. Yang, R. T., Carbon 38, 623 (2000).Google Scholar
7. Ye, Y., Ahn, C. C., Witham, C., Fultz, B., Liu, J., Rinzler, A. G., Colbert, D., Smith, K. A. and Smalley, R. E., Applied Physics Letters 74, 2307 (1999).Google Scholar
8. Zhu, H. W., Chen, A., Mao, Z. Q., Xu, C. L., Xiao, X., Wei, B. Q., Liang, J. and Wu, D. H., Journal of Materials Science Letters 19, 1237 (2000).Google Scholar
9. Dillon, A. C., Gennett, T., Jones, K. M., Alleman, J. L., Parilla, P. A. and Heben, M. J., Advanced Materials 11, 1354 (1999).Google Scholar
10. Parilla, P. A., Dillon, A. C., Gennett, T., Alleman, J. L., Jones, K. M. and Heben, M. J., to be publishedGoogle Scholar
11. Ishiyama, S., Fukaya, K., Eto, M. and Miya, N., Journal of Nuclear Science and Technology 37, 144 (2000).Google Scholar