Hostname: page-component-5c6d5d7d68-qks25 Total loading time: 0 Render date: 2024-08-10T05:54:11.836Z Has data issue: false hasContentIssue false
  • English
  • Français

Behavior of Concrete as a Barrier Material for Nuclear Waste Disposal

Published online by Cambridge University Press:  21 February 2011

R. J. James  and
Y. R. Rashid
R. J. James
Affiliation:
ANATECH Research Corp., P.O. Box 9165, La Jolla, CA 92038
Y. R. Rashid
Affiliation:
ANATECH Research Corp., P.O. Box 9165, La Jolla, CA 92038
Get access

Summary

The foundation necessary for a constitutive model to simulate the response of concrete at elevated temperature has been presented. A model including temperature dependent creep, material property degradation, and cracking is needed to evaluate the long term functional requirements of concrete as a barrier material for nuclear waste disposal. Since the stress due to thermal load is proportional to the modulus, the degradation of the modulus with time even at constant elevated temperatures requires continual redistribution of load. Furthermore, since this degradation is not recoverable, the response of the material at elevated temperatures exhibits a complex dependence not only on the temperature distribution, but on the prior thermal history of the structure.

This constitutive model for the response of concrete at elevated temperatures has been implemented into an implicit, finite element program called ANACAP [8]. Because of the direct coupling with temperature, both through thermal loads and material property dependency, ANACAP also contains a heat transfer module that includes thermal effects due to fluid flow and moving material boundaries. This program has been applied to problems involving underground waste storage tanks and grout vaults at the DOE Hanford site in Richland, Washington.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 176: Symposium U – Scientific Basis for Nuclear Waste Management XIII , 1989 , 39
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Arutyunyan, N. Kh., “Some Problems in the Theory of Creep,” Pergamon Press, 1966.Google Scholar
[2] Browne, R.D., “Properties of Concrete in Reactor Vessels,” Conference on Prestressed Concrete Pressure Vessels at Church House, Westminster, March, 1967, The Institute of Civil Engineers, London 1968, pp 131–152.Google Scholar
[3] Hannant, D.J., “Strain Behavior of Concrete up to 950C Under Compressive Stresses,” Conference on Prestressed Concrete Pressure Vessels at Church House, Westminster, March, 1967, The Institute of Civil Engineers, London, 1968, pp 177–192.Google Scholar
[4] Marechal, J.E., “Le Fluage du Betou en Fonction de la Temperature,” Materials & Structures (RILEM), Vol. 2, No 8, 1969, pp 111–115.Google Scholar
[5] Portland Cement Association, “Effects of Long-Term Exposure to Elevated Temperature on the Mechanical Properties of Hanford Concrete,” Report Number RHO-C-54 to Rockwell Hanford Operations, Richland, WA., October 1981.Google Scholar
[6] Henager, C.H. et al. , “Evaluation and Modeling of Concrete Property Data at Elevated Temperatures for Use in the Safe-Crack Computer Code“, Battelle, Pacific Northwest Lab Report to Kaiser Engineers Hanford, Feb, 1988.Google Scholar
[7] Rashid, Y.R., “Ultimate Strength Analysis of Prestressed Concrete Pressure Vessels“, Nuclear Eng. and Design, 7, 334–344, 1968.Google Scholar
[8] James, R.J., “ANACAP-2D: Thermal and Stress Analysis for Waste Storage Tanks, User's Manual,” ANATECH Report No. ANA-89-0090 to Westinghouse Hanford Co, Richland, WA., Sept 1989.Google Scholar