Hostname: page-component-5c6d5d7d68-wbk2r Total loading time: 0 Render date: 2024-08-14T22:04:03.106Z Has data issue: false hasContentIssue false
  • English
  • Français

CD Weld Interfacial Structure for Al-Fe Based Couples

Published online by Cambridge University Press:  15 February 2011

C. P. Dogan ,
R. D. Wilson  and
J. A. Hawk
C. P. Dogan
Affiliation:
U. S. Bureau of Mines, Albany Research Center, Albany, Oregon 97321-2198
R. D. Wilson
Affiliation:
U. S. Bureau of Mines, Albany Research Center, Albany, Oregon 97321-2198
J. A. Hawk
Affiliation:
U. S. Bureau of Mines, Albany Research Center, Albany, Oregon 97321-2198
Get access

Abstract

The U.S. Bureau of Mines has studied the capacitive discharge weld interface between Al and Fe using optical and transmission electron microscopy (TEM). Capacitive discharge welding (CDW) is a rapid solidification process in which the amount of molten metal at the interface is small compared to the sample size. As a result, high cooling rates (106 K/s) can be achieved, providing a weldment made up of small grains. Large magnetic fields produced by the process tend to mix the molten metals at the interface to form a complex alloy, the nature of which depends upon the starting electrode materials. This effect is characterized by a marblecake pattern in optical micrographs. The amount of mixing is related to the melting temperature of the cathode with respect to the anode. Increased mixing occurs when the melting temperature of the cathode is higher than the melting temperature of the anode. TEM has revealed that when aluminum is the anode material, the iron grains of the cathode are surrounded by a layer of aluminum. When the iron is the anode, a thin layer of iron surrounds the aluminum grains.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 314: Symposium R – Joining and Adhesion of Advanced Inorganic Materials , 1993 , 169
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Jones, H., Mater. Sci. Eng., 5, 1 (1969).CrossRefGoogle Scholar
2. Shoup, T. E., Pease, C. C. and Tamiuasu, M., in Metals Handbook Vol.6, 9th ed. (ASM, Metals Park, OH 1983), p. 729.Google Scholar
3. Devletian, J. H., Weld. J., 66, 33 (1987).Google Scholar
4. Venkataraman, S., and Devletian, J. H., Weld. J. (suppl.), 67, 111s (1988).Google Scholar
5. Venkataraman, S., and Devletian, J. H., in Principles of Solidification and Materials Processing, Vol 2, edited by Trivedi, R., Sekhar, J. A., and Mazumdar, J. (Trans Tech Publications, New York, 1988), p. 859.Google Scholar
6. Einerson, C. J., Clark, D. E. and Devletian, J. H., in Proc. of the 1987 ASME/JSME Thermal Engineering Joint Conf., Volume Three, edited by Marto, P. J. and Tanasawa, I. (ASME, New York, 1987), p. 217.Google Scholar
7. Wilson, R. D., Hawk, J. A., and Devletian, J. H., in Joining and Adhesion of Advanced Inorganic Materials, edited by A. H. Carim, D. S. Schwartz, R. S. Silberglitt, and R. E. Loehman (to be publ. Mater. Res. Soc. Proc., Pittsburgh, PA).Google Scholar
8. Kuo, S., Welding Metallurgy (John Wiley and Sons, New York, 1987), p. 202.Google Scholar
9. Kuo, S., Welding Metallurgy (John Wiley and Sons, New York, 1987), p. 146.Google Scholar