Hostname: page-component-84b7d79bbc-5lx2p Total loading time: 0 Render date: 2024-07-28T22:19:24.039Z Has data issue: false hasContentIssue false
  • English
  • Français

Characterization of CMOS Devices in 0.5-μm Silicon-On-Sapphire Films Modified by Solid Phase Epitaxy and Regrowth (Spear)

Published online by Cambridge University Press:  21 February 2011

P.K. Vasudev  and
D.C. Mayer
P.K. Vasudev
Affiliation:
Hughes Research Laboratories Malibu, CA
D.C. Mayer
Affiliation:
Hughes Research Laboratories Malibu, CA
Get access

Abstract

Complementary Metal-Oxide-Semiconductor (CMOS) devices and circuits with minimum feature sizes of about 1 μm were fabricated in 0.5-μm-thick epitaxial Silicon-On-Sapphire (SOS) films. The films were modified by ion implantation and subsequent solid phase recrystallization processes which reduced the total microtwin concentrations in the Si layers by more than a hundredfold, while increasing electron and hole channel mobilities between 40 to 50%. Leakage currents were reduced by over 2 orders of magnitude, while drive currents and subthreshold slopes showed significant improvements over as–grown SOS films. Propagation delays of less than 80 psec were obtained for CMOS/SOS inverters with Leff = 0.6 μm.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 33: Symposium D – Comparison of Thin Film Transistor and SOI Technologies , 1984 , 35
Copyright
Copyright © Materials Research Society 1984

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. VLSI Laboratory, Texas Instruments Inc., “Technology and design of MOS VLSI,” IEEE J. Solid-State Cir. SC-17, 442–448 (June, 1982).Google Scholar
2. Inone, T. and Uoshii, T., ”Crystalline disorder reduction and defect type change in SOS films by Silicon implantation and subsequent thermal annealing”. App. Phys. Lett. 36, 64–66 (1980).10.1063/1.91318Google Scholar
3. Amano, J. and Carey, K., ”A three-step process for low defect density silicon-on-sapphire”, App. Phy. Lett. 39, (July, 1980).Google Scholar
4. Schlotterer, H., ”Mechanical and Electrical properties of Epitaxial Silicon on Sapphire”, Solid State Electronics, 11, 947 (1968).Google Scholar