Hostname: page-component-5c6d5d7d68-wpx84 Total loading time: 0 Render date: 2024-08-06T14:21:56.426Z Has data issue: false hasContentIssue false
  • English
  • Français

The Dependence of Ion Beam Mixing on Projectile Mass*

Published online by Cambridge University Press:  25 February 2011

R. S. Averback ,
L. J. Thompson  and
L. E. Rehn
R. S. Averback
Affiliation:
Materials Science and Technology Division, Argonne National Laboratory, 9700 S. Cass Ave., Argonne, Illinois 60439, U.S.A.
L. J. Thompson
Affiliation:
Materials Science and Technology Division, Argonne National Laboratory, 9700 S. Cass Ave., Argonne, Illinois 60439, U.S.A.
L. E. Rehn
Affiliation:
Materials Science and Technology Division, Argonne National Laboratory, 9700 S. Cass Ave., Argonne, Illinois 60439, U.S.A.
Get access

Abstract

Ion beam mixing in Pt-Si bilayered samples was measured during irradiation with projectiles ranging in mass from 4 amu (He) to 131 amu (Xe) at 10 K, 300 K and 373 K. Using deposited damage energy as a basis for comparing the different irradiations, it was found that the beavier ions were more efficient than the lighter ones for inducing mixing. Moreover, it was observed that the mixing was essentially independent of temperature below 373 K. These results are interpreted on the basis that the mixing is caused by the stimulated motion of defects during the cooling phase of energetic cascades.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 27: Symposium E – Ion Implantation and Ion Beam Processing of Materials , 1983 , 25
Copyright
Copyright © Materials Research Society 1984

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

*

Work supported by the U.S. Department of Energy.

References

REFERENCES

1. Sigmund, P. and Gras-Marti, A., Nucl. Inst. & Meth., 182/183, 25 (1981).Google Scholar
2. Paine, B. M., J. Appl. Phys. 53, 6828 (1982).Google Scholar
3. Matteson, S., Paine, B. M., and Nicolet, M.-A., Nucl. Instr. & Meth., 182/183, 53 (1982).Google Scholar
4. Kim, S.-J., Averback, R. S., Baldo, P., and Nicolet, M.A., submitted to Appl. Phys. Lett.Google Scholar
5. Sigmund, P., Appl. Phys., A 30, 43 (1983).Google Scholar
6. Averback, R. S., Thompson, L. J. Jr., Moyle, J., and Shalit, M., J. Appl. Phys., 53, 1342 (1982).Google Scholar
7. Mantl, S., Averback, R. S., Rehn, L. E., and Thompson, L. J., unpublished.Google Scholar
8. Averback, R. S., J. Nucl. Mater. 108/109, 33 (1982).Google Scholar
9. Guinan, M. W. and Kinney, J. H., Proc. 2nd Topical Meeting on Fus on Reactor Materials, Wa. 1981.Google Scholar
10. King, W. E. and Benedek, R., J. Nucl. Mater. 117, 26 (1983).Google Scholar
11. Biersack, J. P. and Haggmark, L. G., Nucl. Instr. & Meth. 174, 257 (1980).Google Scholar
12. Johnson, K. R., Rehn, L. E., and Averback, R. S., unpublished.Google Scholar
13. Averback, R. S., Benedek, R., and Merkle, K. L., Phys. Rev. B 18, 4156 (1978).Google Scholar
14. Rehn, L. E., Okamoto, P. R., and Averback, R. S., unpublished.Google Scholar
15. Lamond, S. P. and Potter, D. I., J. Nucl. Mater. 117, 64 (1983).Google Scholar
16. Chapman, G. E., Lau, S. S., Matteson, S., and Mayer, J. W., J. Appl. Phys. 6321 (1979).Google Scholar