Hostname: page-component-78c5997874-s2hrs Total loading time: 0 Render date: 2024-11-19T06:28:36.643Z Has data issue: false hasContentIssue false
  • English
  • Français

Effect of Copper and Nickel on the Neutron Irradiation Damage in Iron Alloys

Published online by Cambridge University Press:  16 February 2011

D.T. Hoelzer  and
F. Ebrahimi
D.T. Hoelzer
Affiliation:
Presently at Alfred University, Alfred, NY 14802
F. Ebrahimi
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville, FL 32611
Get access

Abstract

Iron alloys containing copper and nickel were irradiated at 288°C to a fluence of 4.63 × 1019 neutrons/cm2. Neutron irradiation produced defects which were observable by TEM in all of the iron alloys studied. The TEM analysis of the defects showed them to be interstitial dislocation loops with a < 100 > and a/2 < 111 > Burgers vectors. The size, the number density, and the Burgers vector of dislocations were affected by the alloy composition. The addition ofcopper and nickel decreased the dislocation loop size and increased the fraction of a/2 < 111 > loops. No voids or vacancy loops were observed in the irradiated iron alloys. The results are discussed in terms of dislocation loop nucleation and growth.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 373: Symposium Y – Microstructure of Irradiated Materials , 1994 , 57
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Little, E.A., Bullough, R., and Wood, M.H., Proc. Roy. Soc. A, 372, 565 (1980).Google Scholar
2. Robertson, I.M., Ph.D. Dissertation, University of Oxford (1982).Google Scholar
3. Gelles, D.S., Radiation-induced changes in microstructure: 13th International Symposium, ASTM STP 955, Amer. Soc. Test. Mater., 560 (1987).Google Scholar
4. Miller, M.K., Hoelzer, D.T., Ebrahimi, F., Hawthorne, J.R., and Burke, M.G., Jnl. de Physique, Colloque C6, 423–428 (1987)Google Scholar
5. Miller, M.K., Hoezler, D.T., Ebrahimi, F., Hawthorne, J.R., and Burke, M.G., Proceedings of 3rd International Symposium on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors, TMS-AIME, 133–139 (1988).Google Scholar
6. Krishnamoorthy, V. and Ebrahimi, F., MRS Proceedings, 138, 99–104 (1989).Google Scholar
7. Eyre, B.L. and Bullough, R., Phil. Mag. A, 12, 31 (1965).Google Scholar
8. Harder, J.M. and Bacon, D.J., Phil. Mag. A, 58(1), 165 (1988).Google Scholar
9. Eyre, B.L., in Fundamentals of Deformation and Fracture, Bilby, B.A., Miller, K.J., and Willis, J.R. (Eds.), Cambridge University Press, NY, 369 (1984).Google Scholar
10 Salje, G. and Feller-Kniepmeier, M., J. Appl. Phys., 48(5), 1833 (1977).Google Scholar
11. Muroga, T., Yamaguchi, A., and Yoshida, N., in Effects of Radiation on Materials, ASTM STP 1046, Packan, N.H., Stoller, R.E., and Kumar, A.S. (Eds.), Amer. Soc. Test. Mater., Philadelphia, PA, 396 (1988).Google Scholar
12. Bullough, R., in Dislocations and Properties of Real Materials, Institute of Metals, London, 283 (1985).Google Scholar