Hostname: page-component-5c6d5d7d68-vt8vv Total loading time: 0.001 Render date: 2024-08-17T21:14:08.596Z Has data issue: false hasContentIssue false
  • English
  • Français

Effect of Nitrogen Diffusion in Ti and TiTiN Films for Future DRAM Bit Line Interconnects and Plugs

Published online by Cambridge University Press:  10 February 2011

John M. Drynan  and
Kuniaki Koyama
John M. Drynan
Affiliation:
ULSI Device Development Laboratories, NEC Corporation 1120 Shimokuzawa, Sagamihara, Kanagawa 229, JAPAN
Kuniaki Koyama
Affiliation:
ULSI Device Development Laboratories, NEC Corporation 1120 Shimokuzawa, Sagamihara, Kanagawa 229, JAPAN
Get access

Abstract

The effects of nitrogen diffusion from both N2 gas phase and TiN solid phase sources on the characteristics of Ti/TiN bilayer and TiN/Ti/TiN trilayer films have been investigated in terms of both materials properties such as resistance, coloration, composition, and crystallinity, and prospective applications such as for DRAM bit line interconnections and contact-hole plugs. Using blank films it has been found, in coincidence with other work, that at the onset of N diffusion and hence low N concentrations within a Ti film, the sheet resistance increases and the Ti layer becomes a solid solution of N in hexagonal Ti. As the concentration increases, the sheet resistance reaches a maximum, after which it decreases abruptly and the structure becomes primarily tetragonal Ti2N phase. At higher concentrations the resistance stabilizes or increases slightly and the structure becomes more cubic TiN phase. Sheet resistances calculated from resistance measurements of Ti and TiN mono- and multilayer conductor lines with and without RTN and RTAr thermal treatments have shown that the conductor lines exhibit similar behavior to the blank films. In comparison with the mon-olayer lines, the multilayer ones are generally lower in resistance and more stable over a wider range of post-deposition process temperatures.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 429: Symposium N – Rapid Thermal and Integrated Processing V , 1996 , 141
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Drynan, J.M., Hada, H., and Kunio, T. in Advanced Metallization and Processing for Semiconductor Devices and Circuits II, edited by Katz, A., Murarka, S.P., Nisim, Y.I., and Harper, J.M.E., (Materials Research Society Proc. 260, Pittsburgh, PA, 1992) pp.323–328.Google Scholar
2. Drynan, J.M. and Koyama, K. in Rapid Thermal and Integrated Processing IV, edited by Brueck, S.R.J., Gelpey, J.C., Kermani, A., Regolini, J.L., and Sturm, J.C. (Materials Research Society Proc. 387, Pittsburgh, PA, 1995) pp.419–430.Google Scholar
3. Wang, S.-Q. and Allen, L.H., presented at Symposium G: Structure and Properties of Multilayered Thin Films, 1995 MRS Spring Meeting, San Francisco, CA.Google Scholar
4. Ristolainen, E.O., Molarius, J.M., Korhonen, A.S., and Lindroos, V.K., J. Vac. Sci. Technol. A 5, 2184 (1987).Google Scholar
5. Ting, C.Y., J. Vac. Sci. Technol. 21, 14 (1982).Google Scholar
6. Garceau, W.J., Fournier, P.R., and Herb, G.K., Thin Solid Films 60, 237 (1979).Google Scholar
7. Noel, J.-P., Houghton, D.C., Este, G., Shepherd, F.R., and Plattner, H., J. Vac. Sci. Technol. A 2, 284 (1984).Google Scholar
8. Ito, H., Toshida, Y., Yamaji, S., Maeyama, Y., Ina, T., and Minowa, Y., J. Nucl. Instrum. Methods B39, 174 (1989).Google Scholar
9. Suri, A.K., Nimmagadda, R., and Bunshah, R.F., Thin Solid Films 72, 529 (1980).Google Scholar
10. Jacobson, B.E., Nimmagadda, R., and Bunshah, R.F., Thin Solid Films 63, 333 (1979).Google Scholar
11. Igasaki, Y. and Mitsuhashi, H., J. Appl. Phys. 68, 2439 (1990).Google Scholar
12. Wang, D., Wang, X., Yang, G.,Liu, X., Jia, Y., Zhou, G., and Li, G., J. Appl. Phys. 77, 2945 (1995).Google Scholar
13. Holmberg, B., Acta Chem Scand. 16, 1255 (1962).Google Scholar
14. Dawson, P.T. and Stazyk, S.A.J., J. Vac. Sci. Technol. 21, 36 (1982).Google Scholar