Hostname: page-component-77c89778f8-gq7q9 Total loading time: 0 Render date: 2024-07-16T12:01:13.821Z Has data issue: false hasContentIssue false
  • English
  • Français

Effects of Grain Boundary Constraint on the Constitutive Response of Tantalum Bicrystals

Published online by Cambridge University Press:  15 February 2011

A. Ziegler ,
G. H. Campbell ,
M. Kumar  and
J. S. Stölken
A. Ziegler
Affiliation:
Material Science and Technology Division, Chemistry and Materials Science Directorate
G. H. Campbell
Affiliation:
Material Science and Technology Division, Chemistry and Materials Science Directorate
M. Kumar
Affiliation:
Material Science and Technology Division, Chemistry and Materials Science Directorate
J. S. Stölken
Affiliation:
New Technologies Engineering Division, Engineering Directorate Lawrence Livermore National Laboratory, University of California, Livermore, CA 94551, USA
Get access

Abstract

The role of grain boundary constraint in strain localization, slip system activation, slip transmission, and the concomitant constitutive response was examined performing a series of uniaxial compression tests on tantalum bicrystals. Tantalum single crystals were diffusion bonded to form a (011) twist boundary and compressed along the [011] direction. The resulting threedimensional deformation was analyzed via volume reconstruction. With this technique, both the effective states of stress and strain over the cross-sectional area could be measured as a function of distance from the twist boundary, revealing a highly constrained grain boundary region. Post-test metallurgical characterization was performed using Electron Back-Scattered-Diffraction (EBSD) maps. The results, a spatial distribution of slip patterning and mapping of crystal rotation around the twist-boundary, were analyzed and compared to the known behavior of the individual single crystals. A rather large area near the grain boundary revealed no crystal rotation. Instead, patterns of alternating crystal rotation similar to single crystal experiments were found to be some distance away (~1mm) from the immediate grain boundary region, indicating the large length scale of the rotation free region.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 779: Symposium W – Multiscale Phenomena in Materials - Experiments and Modeling Related to Mechanical Behavior , 2003 , W6.4
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Harren, S. V., Deve, H. E., Asaro, R. J., Acta. Met. 36, 2435 (1988).Google Scholar
2. Becker, R., Acta Met. Mat. 39, 1211 (1991).Google Scholar
3. Sutton, A., Balluffi, R., Interfaces in Crystalline Materials, p.737 (1995).Google Scholar
4. Frank, F.C., Met. Trans. 19, 403 (1988).Google Scholar
5. Smialek, R. L., Mitchell, T. E., Phil. Mag. 22, 1105 (1970).Google Scholar
6. Mason, T. A., Adams, B. L., J. of Metals 46, 43 (1994).Google Scholar
7. Schwartz, A. J., Stölken, J. S., King, W. E., Campbell, G. H., Mat. Sci. Eng. A317, 77 (2001).Google Scholar