No CrossRef data available.
Article contents
Elemental Analysis and Current-Voltage Characteristics of LiZnP and LiZnAs Samples for Solid-State Neutron Detectors
Published online by Cambridge University Press: 16 September 2013
Abstract
Research for a reliable solid-form semiconductor neutron detector continues because such a device would have greater efficiency, in a compact form, than present day gas-filled 3He and 10BF3 detectors. The 6Li(n,t)4He reaction yields a total Q value of 4.78 MeV, larger than 10B, and easily identified above background radiations. Hence, devices composed of either natural Li (nominally 7.5% 6Li) or enriched 6Li (usually 95% 6Li) may provide a semiconductor material for compact high efficiency neutron detectors. A sub-branch of the III-V semiconductors, the filled tetrahedral compounds, AIBIICV, known as Nowotny-Juza compounds, are known for their desirable cubic crystal structure, and were originally studied for photonic applications. Equimolar portions of Li, Zn, and P or As were sealed under vacuum (10-6 Torr) in quartz ampoules with a graphite lining, loaded into a compounding furnace, and heated to 560 °C to form the ternary compound, LiZnP or LiZnAs, and further annealed to promote crystallization. The chemical composition of the synthesized starting material was confirmed at Galbraith Laboratories, Inc. by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), which showed the compounds were reacted in equal ratios, 1-1-1, to form ternary compounds. Bulk single crystal samples were grown by a high temperature technique described elsewhere. Samples were cut, polished, and prepared for electrical characterization by depositing a Ti/Au contact onto one side of the one of the samples and using silver epoxy to form the other contact. Current-voltage curves were collected for a sample with silver epoxy for both anode and cathode contact, and for a sample with a Ti-Au anode contact and silver epoxy cathode contact. A much higher resistivity was calculated, 6.6 x 1010 Ω·cm, for the sample with a Ti-Au contact compared the high conductivity seen with the sample using silver epoxy contacts.
- Type
- Articles
- Information
- MRS Online Proceedings Library (OPL) , Volume 1576: Symposium WW – Nuclear Radiation Detection Materials , 2013 , mrss13-1576-ww08-02
- Copyright
- Copyright © Materials Research Society 2013
References
REFERENCES
Montag, B. W., Nelson, K. A., Reichenberger, M. A., Arpin, K. R., McDonald, H. E., Browning, S. R., et al. ., “Growth and preparation of LiZnP and LiZnAs for solid-state neutron detectors, ” in Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC), 2011 IEEE, 2011, pp. 1742–1744.CrossRefGoogle Scholar
Bell, Z. W., Pohl, K. R., and Van Den Berg, L., “Neutron detection with mercuric iodide, ” Nuclear Science, IEEE Transactions on, vol. 51, (2004) pp. 1163–1165.CrossRefGoogle Scholar
Vradii, A. G., Krapivin, M. I., Maslova, L. V., Matveev, O. A., Khusainov, A. K., and Shashurin, V. K., “Possibilities of recording thermal neutrons with cadmium telluride detectors, ” Soviet Atomic Energy, vol. 42, (1977) pp. 64–66.CrossRefGoogle Scholar
Beyerle, A. G. and Hull, K. L., “Neutron detection with mercuric iodide detectors, ” Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 256, (1987) pp. 377–380.CrossRefGoogle Scholar
McGregor, D. S., Lindsay, J. T., and Olsen, R. W., “Thermal neutron detection with cadmium1-x zincx telluride semiconductor detectors, ” Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 381, (1996) pp. 498–501.CrossRefGoogle Scholar
Kumashiro, Y., Kudo, K., Matsumoto, K., Okada, Y., and Koshiro, T., “Thermal neutron irradiation experiments on 10BP single-crystal wafers, ” Journal of the Less Common Metals, vol. 143, (1988) pp. 71–75.CrossRefGoogle Scholar
McGinnis, W. C., “Film Implementation of a Neutron Detector (FIND): Proof of Concept Device, ” ed. SPAWAR Systems Center: Technical Report 1921, 2003.CrossRefGoogle Scholar
Lund, J. C., Olschner, F., Ahmed, F., and Shah, K. S., “Boron Phosphide on Silicon for Radiation Detectors, ” MRS Online Proceedings Library, vol. 162, (1989) pp. 601–604.CrossRefGoogle Scholar
Caruso, A. N., Dowben, P. A., Balkir, S., Schemm, N., Osberg, K., Fairchild, R. W., et al. ., “The all boron carbide diode neutron detector: Comparison with theory, ” Materials Science and Engineering: B, vol. 135, (2006) pp. 129–133.CrossRefGoogle Scholar
Robertson, B. W., Adenwalla, S., Harken, A., Welsch, P., Brand, J. I., Dowben, P. A., et al. ., “A class of boron-rich solid-state neutron detectors, ” Applied Physics Letters, vol. 80, (2002) pp. 3644–3646.CrossRefGoogle Scholar
Groot, P., Grondel, J. H. F., and Put, P. J. v. d., “Chemical Vapour Deposition of Boron Phosphides Using Bromide Etchants, ” Solid State Ionics, vol. 16, (1985) pp. 95–98.CrossRefGoogle Scholar
Caruso, A. N., Billa, R. B., Balaz, S., Brand, J. I., and Dowben, P.A., “The Heteroisomeric Diode, ” J. Phys. Condens. Matter, vol. 16, (2004) pp. L139–L146.CrossRefGoogle Scholar
McGregor, D. S., Hammig, M. D., Yang, Y. H., Gersch, H. K., and Klann, R. T., “Design considerations for thin film coated semiconductor thermal neutron detectors—I: basics regarding alpha particle emitting neutron reactive films, ” Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 500, (2003) pp. 272–308.CrossRefGoogle Scholar
Juza, R., Langer, K., and Von Benda, K., “Ternary Nitrides, Phosphides, and Arsenides of Lithium, ” Angewandte Chemie International Edition in English, vol. 7, (1968) pp. 360–370.CrossRefGoogle Scholar
Nowotny, H. and Bachmayer, K., “Die Verbindungen LiMgP, LiZnP und LiZnAs, ” Monatshefte für Chemie und verwandte Teile anderer Wissenschaften, vol. 81, (1950) pp. 488–496.CrossRefGoogle Scholar
Kieven, D., Grimm, A., Beleanu, A., Blum, C. G. F., Schmidt, J., Rissom, T., et al. ., “Preparation and properties of radio-frequency-sputtered half-Heusler films for use in solar cells, ” Thin Solid Films, vol. 519, (2011) pp. 1866–1871.CrossRefGoogle Scholar
Kuriyama, K., Kato, T., Kato, T., and Matsuno, H., “Growth and photoluminescence properties of the filled tetrahedral semiconductor LiZnAs, ” J. Cryst. Growth, vol. 166, (1996) pp. 631–635.CrossRefGoogle Scholar
Kuriyama, K. and Nakamura, F., “Electrical transport properties and crystal structure of lithium zinc arsenide (LiZnAs), ” Phys. Rev. B: Condens. Matter, vol. 36, (1987) pp. 4439–41.CrossRefGoogle Scholar
Kuriyama, K. and Katoh, T., “Optical band gap of the filled tetrahedral semiconductor lithium zinc phosphide (LiZnP), ” Phys. Rev. B: Condens. Matter, vol. 37, (1988) pp. 7140–2.CrossRefGoogle Scholar
Kuriyama, K., Kato, T., and Kawada, K., “Optical band gap of the filled tetrahedral semiconductor LiZnAs, ” Phys. Rev. B: Condens. Matter, vol. 49, (1994) pp. 11452–5.CrossRefGoogle ScholarPubMed
Bacewicz, R. and Ciszek, T. F., “Preparation and characterization of some AIBIICV type semiconductors, ” Appl. Phys. Lett., vol. 52, (1988) pp. 1150–1.CrossRefGoogle Scholar
Bacewicz, R. and Ciszek, T. F., “Crystal growth and characterization of some novel AIBIICV semiconductors, ” Acta Phys. Pol., A, vol. A77, (1990) pp. 379–81.Google Scholar
Montag, B. W., Arpin, K. R., Browning, S., McDonald, H., and McGregor, D. S., “Growth and characterization of Li ternary compounds for solid-state neutron detection, ” 2011, pp. NUCL-51.CrossRefGoogle Scholar
“GLI Method Summary: Inductively Coupled Plasma Atomic Emission Spectrometry, ” ed: Galbraith Laboratories Inc.Google Scholar
Du, M.-H., Biswas, K., and Singh, D. J., “Resistivity, carrier trapping, and polarization phenomenon in semiconductor radiation detection materials, ” (2012) pp. 85070M–85070M.CrossRefGoogle Scholar
Lachish, U.. (1998), CdTe and CdZnTe Crystal Growth and Production of Gamma Radiation Detectors. guma science. Available: http://urila.tripod.com/crystal.htm
Google Scholar