Hostname: page-component-78c5997874-m6dg7 Total loading time: 0 Render date: 2024-11-19T10:39:13.465Z Has data issue: false hasContentIssue false
  • English
  • Français

Enhancement of Copper Wetting via Surfactant-Based Post-Treatment of Ultra-Thin Atomic Layer Deposited Tantalum Nitride Liners

Published online by Cambridge University Press:  01 February 2011

Oscar van der Straten ,
Yu Zhu ,
Kathleen Dunn  and
Alain Kaloyeros
Oscar van der Straten
Affiliation:
UAlbany Institute for Materials & School of NanoSciences and NanoEngineering, University at Albany — SUNY, Albany, NY 12203
Yu Zhu
Affiliation:
UAlbany Institute for Materials & School of NanoSciences and NanoEngineering, University at Albany — SUNY, Albany, NY 12203
Kathleen Dunn
Affiliation:
UAlbany Institute for Materials & School of NanoSciences and NanoEngineering, University at Albany — SUNY, Albany, NY 12203
Alain Kaloyeros
Affiliation:
UAlbany Institute for Materials & School of NanoSciences and NanoEngineering, University at Albany — SUNY, Albany, NY 12203
Get access

Abstract

The influence of surfactant-based liner post-treatment on the wetting and nucleation characteristics of ultra-thin copper (Cu) films has been examined, employing ultra-thin atomic layer deposited (ALD) tantalum nitride (TaNx) as liner material. This surfactant-based posttreatment consists of in-situ exposure of the liner to a metal-organic source containing a low surface free energy metal (Sn) surfactant, which is a potential candidate for enhancing the wetting of Cu on liner surfaces and subsequently suppressing island-type growth of Cu, due to both the high atomic volume and low surface free energy of the surfactant relative to Cu. A methodology involving thermally-enhanced de-wetting of Cu, promoted by annealing Cu/liner stacks in a forming gas (95% Ar, 5% H2) ambient under several applied thermal budgets (annealing at 350°C for 30 minutes, and at 600°C for 4, 12, and 48 hrs, respectively), was utilized to both elucidate and quantify the wetting properties of Cu on liners, via detailed analyses of the surface morphology of annealed stacks by atomic force microscopy (AFM) and scanning electron microscopy (SEM). By comparing stacks containing ALD TaNx liners to those that contain post-treated ALD TaNx liners, this method allowed an evaluation of the effectiveness of surfactant-based liner surface post-treatments in inhibiting Cu de-wetting.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 766: Symposium E – Materials, Technology and Reliability for Advanced Interconnects and Low-k Dielectrics - 2003 , 2003 , E10.3
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. The International Technology Roadmap for Semiconductors 2001 Edition (Semiconductor Industry Association, 2001).Google Scholar
2. Rossnagel, S., Proceedings of the 2001 IEEE International Interconnect Technology Conference (IITC), Burlingame, June 4-6, 2001.Google Scholar
3. Chopra, K.L., Bahl, S.K., J. Appl. Phys. 38 (9), 3607–3610 (1967).Google Scholar
4. Mayadas, A.F., Shatzkes, M., Phys. Rev. B 1 (4), 1382–1389 (1970).Google Scholar
5. Sondheimer, E.H., Adv. Phys. 1, 1 (1952).Google Scholar
6. Soffer, S.B., J. Appl. Phys. 38 (4), 1710–1715 (1967).Google Scholar
7. Chopra, H.D., Yang, D.X., Chen, P.J., Egelhoff, W.F. Jr, Phys. Rev. B 65, 094433 (2002).Google Scholar
8. Straten, O. van der, Zhu, Y., Eisenbraun, E., Kaloyeros, A., in Silicon Materials Processing – Characterization and Reliability, edited by Veteran, J., O'Meara, D.L., Misra, V., and Ho, P. (Mater. Res. Soc. Proc. 716, Pittsburgh, PA, 2002), B11.3.1–B11.3.6.Google Scholar
9. Wynblatt, P., Acta Mater. 48, 4439–4447 (2000).Google Scholar
10. Heyraud, J.C., Métois, J.J., J. Cryst. Growth 50 (2), 571–574 (1980).Google Scholar