Hostname: page-component-7bb8b95d7b-s9k8s Total loading time: 0 Render date: 2024-09-12T07:26:51.987Z Has data issue: false hasContentIssue false
  • English
  • Français

Fabrication and Characterization of Cu-14Al-3.5Ni Shape Memory Alloys by Ingot Metallurgy

Published online by Cambridge University Press:  01 February 2011

K. Jai Ganesh  and
Arunya Suresh
K. Jai Ganesh
Affiliation:
attitude.ganesh@gmail.com, Malaviya National Institute of Technology, Metallurgical Engineering, Hostel-2, Room 30, JLN Marg, Jaipur, Rajasthan, 302017, India, +919828024133
Arunya Suresh
Affiliation:
asmania07@yahoo.co.in, Malaviya National Institute of Technology, Metallurgical Engineering, India
Get access

Abstract

Shape Memory Alloys (SMAs) are versatile functional materials with an I.Q of their own. This class of SMART Materials exhibit unique properties like superelasticity and shape memory effect (SME) which have made them suitable for potential applications. Although Ni-Ti SMAs have attracted attention ever since their inception in 1962, Cu based SMAs due to their ease in fabrication, cost effectiveness and high temperature properties are gaining immense popularity. This research aimed at the fabrication of Cu-14 Al-3.5 Ni (wt %) Shape Memory Alloy by a simple cost effective route and its characterization to correlate its structure and properties. The alloy of desired composition was melted in an Electric Resistance Furnace at 1473 K and cast in a metallic mould. Homogenization was carried out at 1123 K for twenty four hours followed by analysis of chemical composition by Optical Emission Spectroscopy. Transformation temperatures of the alloy were determined using Differential Scanning Calorimetry. Heat treatment operations were carried out at 1273 K for one hour followed by quenching in different media. Optical and SEM micrographs were taken at various magnifications and the formation of self accommodating martensite was observed which was further confirmed by X-Ray Diffraction technique. Further improvements in the mechanical properties of the alloy by quaternary additions of Mn and Ti have been cited. Finally, SME was observed in a rolled strip of the alloy, thus concreting the obtained results.

Keywords

Cumemoryalloy
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 888: Symposium V – Materials and Devices for Smart Systems II , 2005 , 0888-V06-01
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Jean, R.D., Wu, T.Y. and Leu, S.S., Scripta Metallurgica et. Materialia, 25, 1991, 883.Google Scholar
[2] Miyazaki, S., Otsuka, K., Sakamoto, H. and Shimuzu, K., Trans. Japan Institute of Metals, 4, 1981, 224.Google Scholar
[3] Aydogdu, Yildirim, Aydogdu, Ayse, Adiguzel, Osman, Journal of Materials Processing Technology, 123, 2002, 498–500.Google Scholar
[4] Van Humbeeck, J., Van Hulle, D., Delaey, L., Ortin, J., Segui, C. and Torra, V., Trans. Japan Institute of Metals, 28, No.5, 1987, 383–391.Google Scholar
[5] Recarte, J., Perez-Saez, R.B., Bocanegra, E.H., No, M.L., San Juan, J., Materials Science and Engineering A273, 1999, 380.Google Scholar
[6] Recarte, V., Perez-Saez, R.B., Bocanegra, E.H., No, M.L., San Juan, J., Materials Science and Engineering A273, 1999, 383.Google Scholar
[7] Saburi, T., Wayman, C.M., Acta. Metallurgica, 34(1986), 2471–2485.Google Scholar
[8] Friend, C.M., J. Physics IV, I, 1991, C4–25.Google Scholar
[9] Nishiyama, Z.: Martensitic Transformation, Academic Press, New York, 1978.Google Scholar