Hostname: page-component-6d856f89d9-jrqft Total loading time: 0 Render date: 2024-07-16T07:58:22.970Z Has data issue: false hasContentIssue false

The Fracture of Reinforced Concrete under Impact Loading

Published online by Cambridge University Press:  25 February 2011

Arnon Bentur
Affiliation:
Building Research Station, Dept. of Civil Engineering, Technion - Israel Institute of Technology, Haifa 32000, Israel.
Sidney Mindess
Affiliation:
University of British Columbia, Department of Civil Engineering, 2324, Main Mall, Vancouver, B.C. V6T 1W5, Canada.
N. Banthia
Affiliation:
University of British Columbia, Department of Civil Engineering, 2324, Main Mall, Vancouver, B.C. V6T 1W5, Canada.
Get access

Abstract

The behaviour under impact loading of concrete beams, reinforced with both smooth and deformed steel reinforcing bars, was studied. Tests were carried out using an instrumented drop-weight impact apparatus, with a 345 kg mass hammer, and drop heights of up to 2.36 m. It was found that, under certain circumstances, the steel reinforcement itself fractured. This behaviour is discussed with reference to the drop height, the type of reinforcement, and the strength of the concrete matrix.

Type
Articles
Copyright
Copyright © Materials Research Society 1986

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Mindess, S., Banthia, N.P., Ritter, A. and Skalny, J.P., in Cement-Based Composites: Strain Rate Effects on Fracture, edited by Mindess, S. and Shah, S.P., Materials Research Society Symposia Proceedings, Vol. 64 (Materials Research Society, Pittsburgh, 1986), this volume.CrossRefGoogle Scholar
2. Mindess, S. and Bentur, A., Cement and Concrete Research, 15 (3), 474484 (1985).Google Scholar
3. Suaris, W. and Shah, S.P., Cement, Concrete, and Aggregates, 3 (2), 7783 (1981).Google Scholar
4. Suaris, W. and Shah, S.P., Journal of Structural Engineering, 109 (7), 17271741 (1983).Google Scholar