Hostname: page-component-5c6d5d7d68-wtssw Total loading time: 0 Render date: 2024-08-29T23:20:47.890Z Has data issue: false hasContentIssue false
  • English
  • Français

High-temperature Deformation Kinetics of Gold at 473K to 773K

Published online by Cambridge University Press:  01 February 2011

Vineet Bhakhri  and
Robert J. Klassen
Vineet Bhakhri
Affiliation:
vbhakhri@uwo.ca, The University of Western Ontario, Mechanical & Materials Engineering, London, Canada
Robert J. Klassen
Affiliation:
rklassen@eng.uwo.ca, The University of Western Ontario, Mechanical & Materials Engineering, London, Canada
Get access

Abstract

High-temperature constant-force indentation creep tests of 200 seconds duration were performed on an annealed gold specimen at 473K to 773K, to investigate the dependence of the micro-/nano-indentation deformation kinetics upon indentation stress, temperature and time. The indent stress displayed a clear indentation size effect at 473 K. An analysis of the measured indentation creep rate, and its dependence upon temperature and stress, indicate that the strength of the deformation rate limiting obstacles increases with temperature. This is consistent with the expected temperature dependent evolution of the dislocation cell structure whose boundaries become the primary obstacles to dislocation glide.

Keywords

activation analysisdislocationsAu
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1137: Symposium EE – Nano-and Microscale Materials–Mechanical Properties and Behavior under Extreme Environments , 2008 , 1137-EE04-10
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Schuh, C.A, Mater Today 9, 32 (2006)Google Scholar
2. Schuh, C.A, Packard, C.E., Lund, A.C., J. Mater. Res. 21, 725 (2004)Google Scholar
3. Bhakhri, V, Klassen, R.J., J. Mater. Sci. 41, 2259 (2006)Google Scholar
4. Faber, B.Y., Orlov, V.I., Heur, A.H., Phys. Status Solidi A166, 155 (1998)Google Scholar
5. Frost, HJ, Ashby, MF, “Deformation-Mechanism Maps” (Pergamon Press, Oxford, 1982), pp.21 Google Scholar
6. Li, W.B., Henshall, J.L., Hooper, R.M. and Easterling, K.E., Acta Metall. Mater. 39, 3099 (1991)Google Scholar
7. Bhakhri, V., Klassen, R.J., Submitted to J. Mater. Res. JMR-2008–0778Google Scholar
8. Mecking, H, Kocks, U.F, Acta Metallurgica 29, 1865 (1981)Google Scholar
9. Mulford, R.A, Acta Metalurgica 27, 1115 (1979)Google Scholar
10. Bhakhri, V, Klassen, R.J., Scripta Mater 31, 395 (2006)Google Scholar