Hostname: page-component-7479d7b7d-qlrfm Total loading time: 0 Render date: 2024-07-13T15:38:33.751Z Has data issue: false hasContentIssue false
  • English
  • Français

Influence of the Deposition Parameters on the Electrical and Mechanical Properties of Physically Vapor-Deposited Iridium and Rhodium Thin Films

Published online by Cambridge University Press:  10 February 2011

Ilan Golecki  and
Margaret Eagan
Ilan Golecki
Affiliation:
Phone(973) 455-4938; Fax(973)455-4339 or -3008; e-mail:Ilan.Golecki@alliedsignal.com
Margaret Eagan
Affiliation:
Honeywell International, Inc. (formerly AlliedSignal, Inc.), Research and Technology, 101Columbia Road, Morristown, NJ 07962
Get access

Abstract

Iridium and rhodium thin films have been formed by e-gun physical vapor deposition on thin-chromium-coated, thermally-oxidized, silicon substrates. Cr, Ir and Rh deposition rates and substrate temperature during deposition were measured and controlled. The effects of the latter deposition parameters on the sheet resistance and stress of the Ir and Rh films are presented and it is demonstrated that both stress and sheet resistance can be desirably minimized by proper choice of the process conditions. The resistivity of these Rh and Ir thin films has been measured at room temperature. Rh can be formed in a wider process window than Ir. Rh films with Rsh = 0.1 Ω/square have been obtained at a thickness of 0.6 ¼m.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 594: Symposium V – Thin Films - Stresses & Mechanical Properties VIII , 1999 , 105
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Golecki, Ilan and Eagan, Margaret, Abstract # A6.33, Symp. on Polycrystalline Thin Films Processing-Structure-Property Relationships, 1998 Fall Meeting of the Mater. Res. Soc., Dec. 1998, Boston, MA.Google Scholar
2. Eckertova, Ludmila, Physics of Thin Films (Plenum Press: New York/ SNTL: Prague, 1986), Ch. 6.Google Scholar
3. Touloukian, Y.S., Kirby, R.K., Taylor, R.E. and Desai, P.D., Thermal Expansion, Metallic Elements and Alloys, Thermophysical Properties of Matter 12 (IFI/Plenum: New York, 1975).Google Scholar
4. Touloukian, Y.S., Kirby, R.K., Taylor, R.E. and Lee, T.Y.R., Thermal Expansion, Nonmetallic Solids, Thermophysical Properties of Matter 13 (IFI/Plenum: New York, 1977).Google Scholar
5. Movchan, B.A. and Demchishin, A.V., Fiz. Metal. Metalloved. 28 (4) 653 (1969).Google Scholar
6. Thornton, John A., Ann. Rev. Mater. Sci., 7, 239 (1977).Google Scholar