Article contents
Integrating Bipolar Junction Transistors with Silicon-Based Light-Emitting Devices
Published online by Cambridge University Press: 15 February 2011
Abstract
Silicon-based optoelectronic devices enable the realization of optoelectronic systems that are compatible with integrated circuit manufacturing technology. This work reports on silicon-based visible light-emitting devices (LEDs) that have been successfully integrated into a standard bipolar fabrication sequence. The basic LED structure consists of a 0.5–1.0μm thick silicon-rich silicon oxide (SRSO) active light-emitting layer formed on a p-type silicon wafer by partial oxidation of porous silicon (PSi), with an n+ doped polysilicon cathode. The LEDs exhibit bright electroluminescence (EL) with a spectral peak between 1.75 and 1.90e. The LEDs are connected in a common-emitter configuration to integrated vertical pnp bipolar driver transistors. This is the first demonstration of an all-silicon visible light emitter / bipolar transistor optoelectronic integrated circuit. The LED device fabrication, process integration, and optoelectronic device characteristics are discussed.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 1997
Footnotes
also Department of Microelectronic Engineering, Rochester Institute of Technology, Rochester, NY 14623
also Laboratory for Laser Energetics, Department of Physics & Astronomy, and The Institute of Optics, University of Rochester, Rochester NY 14627
References
REFERENCES
- 1
- Cited by