Hostname: page-component-7bb8b95d7b-5mhkq Total loading time: 0 Render date: 2024-09-17T11:15:26.127Z Has data issue: false hasContentIssue false
  • English
  • Français

Local Mechanical Stability of the Aluminum / Carbon (Amorphous) and Aluminum / SiO2 (Amorphous) Interface at Extrinsic Dislocations

Published online by Cambridge University Press:  15 February 2011

E. D. McCarty  and
S. A. Hackney
E. D. McCarty
Affiliation:
Dept. of Metallurgical Engineering, Michigan Technological University, Houghton, MI 49931
S. A. Hackney
Affiliation:
Dept. of Metallurgical Engineering, Michigan Technological University, Houghton, MI 49931
Get access

Abstract

Interfaces between Al and amorphous C or amorphous Sio2 were prepared by sputter deposition of the ceramic phases onto the sputter cleaned surfaces of large grain Al. In situ TEM was used to study the behavior of the extrinsic dislocations (slip traces) at the metal/ceramic interface formed by the motion of Al lattice dislocations which intersect the interphase boundary plane. The proximity of the extrinsic lattice dislocation to the metal/ceramic interface places this interphase boundary under a highly localized stress. Relaxation behavior of extrinsic defects at the interface region is a function of the defect standoff distance from the interface, image stress and the applied stress. An experimental technique is proposed to estimate the minimum shear stress the various interfacial regions are able to withstand. Research supported by the Department of Energy.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 314: Symposium R – Joining and Adhesion of Advanced Inorganic Materials , 1993 , 89
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Merwe, J. H.Van der, and Ball, C.A.B. in Epitaxial Growth. Part b, edited by Matthews, J.W., Academic Press, New York, 1975.Google Scholar
2. Varias, A. B., and O'Dowd, N.P., Material Science and Engineering, 1990, A126, pp 65–93.Google Scholar
3. Hirsh, P.B., Howie, A., Nicholson, R.B., Pashley, D.W., and Whelan, M.J., Electron Microscopy of Thin Crystals, Butterworth Inc., Washington D.C. 1965.Google Scholar
4. Whelan, M.J., Journal of the Institute of Metals, 1959, Vol.87, pp 392–405 Google Scholar
5. Head, A.K., Phil. Mag, 1953, Vol.44, 92–94.Google Scholar
6. Kamat, S.V., Hirth, J.P., and Carnahan, B., Mat. Res. Soc. Symp. Proc., 1988, Vol. 103, 55–60.Google Scholar
7. Mader, W., and Knauss, D., “Equilibrium Position of Misfit Dislocations at Planar Interfaces,” Accepted to Acta Met. Mate 1992.Google Scholar
8. Hirth, J.P., and Lothe, J., Theory of Dislocations, John Wiley & Sons, New York, 1982.Google Scholar
9. Dieter, G.E., Mechanical Metallurgy McGraw Hill Book Company, New York, 1986.Google Scholar