Hostname: page-component-77c89778f8-7drxs Total loading time: 0 Render date: 2024-07-16T09:48:31.314Z Has data issue: false hasContentIssue false
  • English
  • Français

Low-Temperature LPCVD MEMS Technologies

Published online by Cambridge University Press:  01 February 2011

Roger T. Howe  and
Tsu-Jae King
Roger T. Howe
Affiliation:
Dept. of EECS and BSAC
Tsu-Jae King
Affiliation:
University of California at Berkeley, Berkeley, CA 94720-1770, U.S.A.
Get access

Abstract

This paper describes recent research on LPCVD processes for the fabrication of high-quality micro-mechanical structures on foundry CMOS wafers. In order to avoid damaging CMOS electronics with either aluminum or copper metallization, the MEMS process temperatures should be limited to a maximum of 450°C. This constraint rules out the conventional polycrystalline silicon (poly-Si) as a candidate structural material for post-CMOS integrated MEMS. Polycrystalline silicon-germanium (poly-SiGe) alloys are attractive for modular integration of MEMS with electronics, because they can be deposited at much lower temperatures than poly-Si films, yet have excellent mechanical properties. In particular, in-situ doped p-type poly-SiGe films deposit rapidly at low temperatures and have adequate conductivity without post-deposition annealing. Poly-Ge can be etched very selectively to Si, SiGe, SiO2 and Si3N4 in a heated hydrogen peroxide solution, and can therefore be used as a sacrificial material to eliminate the need to protect the CMOS electronics during the MEMS-release etch. Low-resistance contact between a structural poly-SiGe layer and an underlying CMOS metal interconnect can be accomplished by deposition of the SiGe onto a typical barrier metal exposed in contact windows. We conclude with directions for further research to develop poly-SiGe technology for integrated inertial, optical, and RF MEMS applications.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 729: Symposium U – MEMS and BioMEMS , 2002 , U5.1
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Bustillo, J. M., Howe, R. T., and Muller, R. S., Proc. IEEE, 86, 1552–1574 (1998).Google Scholar
2. Rodgers, M. S. and Sniegowski, J. J., Solid-State Sensor and Actuator Workshop (Transducers Research Foundation, Cleveland, OH), Hilton Head, SC, 144–149 (1998).Google Scholar
3. Smith, J. H., et al, IEEE Int'l. Electron Devices Meeting, (Washington, DC), 609–612 (1995).Google Scholar
4. Sedky, S., et al, IEEE Trans. Electron Devices, 48, 377–385 (2001).Google Scholar
5. Core, T. A. et al, Solid-State Technology, 36, 39–47 (1993).Google Scholar
6. King, T.-J. and Saraswat, K. C., J. Electrochem. Soc., 141, 2235–2241 (1994).Google Scholar
7. Holleman, J. et al, J. Electrochem. Soc., 140, 1717–1722 (1993).Google Scholar
8. Kim, J.-W. et al,J. Electrochem. Soc., 143, 363–367 (1996).Google Scholar
9. King, T.-J. et al, IEEE Electron Device Lett., 12, 533–535 (1991).Google Scholar
10. King, T.-J. and Saraswat, K. C., IEEE Trans. Electron Devices, 41, 1581–1591 (1994).Google Scholar
11. Sedky, S. et al, IEEE/ASME J. of Microelectromech. Sys., 7, 365–372 (1998).Google Scholar
12. Li, B. et al, IEEE/ASME J. of Microelectromech. Sys., 8, 366–372 (1999).Google Scholar
13. Franke, A. E. et al, Int'l. Conf. on Solid-State Sensors and Actuators (Sendai, Japan), Vol. 1, 530–533 (1999).Google Scholar
14. Franke, A. E., et al, IEEE MEMS Conf. (Orlando, FL) 630–637 (1999).Google Scholar
15. Jeon, Y.-C., King, T.-J. and Howe, R. T., “Properties of phosphorus-doped poly-SiGe films for MEMS applications,” submitted to J. Electrochem. Soc., March 2002.Google Scholar
16. Ozturk, M. C. et al, J. Electronic Mater., 19, 1129–1134 (1990).Google Scholar
17. Franke, A. E., Ph.D. Thesis, Dept. of EECS, Univ. of California at Berkeley, Dec. 2000.Google Scholar
18. Sedky, S., et al, J. Mater. Res., 16, 2607–2612 (2001).Google Scholar
19. Sedky, S., et al, Mat. Res. Soc. Symp. Proc. 609, paper A8.5–7 (2000).Google Scholar
20. Heck, J. M., et al, Int'l. Conf. on Solid-State Sensors and Actuators (Sendai, Japan), Vol. 1, 328–331 (1999).Google Scholar
21. Sedky, S., Witvrouw, A. and Baert, K., Sensors and Actuators A, to appear (2002).Google Scholar
22. Sedky, S., et al, IEEE Trans. Electron Devices, 46, 675–682 (1999).Google Scholar
23. Bhave, S. A., Dept. of EECS, Univ. of California at Berkeley, private communication.Google Scholar
24. Heck, J. M., Ph.D. Thesis, Appl. Sci. and Tech., Univ. of California at Berkeley, May 2001.Google Scholar
25. Franke, A. E., Solid-State Sensor and Actuator Workshop, (Transducers Research Foundation, Cleveland, OH), Hilton Head, SC, 18–21 (2000).Google Scholar
26. Bhave, S. A., et al, to be presented at the Solid-State Sensor and Actuator Workshop, (Transducers Research Foundation, Cleveland, OH), Hilton Head, SC, (2002).Google Scholar