Hostname: page-component-68945f75b7-l9cl4 Total loading time: 0 Render date: 2024-08-05T22:22:42.719Z Has data issue: false hasContentIssue false
  • English
  • Français

Materials Properties Characterization in Fossil-Fuel Power Plants

Published online by Cambridge University Press:  21 February 2011

S. M. Gehl ,
R. Viswanathan  and
R. D. Townsend
S. M. Gehl
Affiliation:
Electric Power Research Institute 3412 Hillview Avenue Palo Alto, California 94303
R. Viswanathan
Affiliation:
Electric Power Research Institute 3412 Hillview Avenue Palo Alto, California 94303
R. D. Townsend
Affiliation:
Electric Power Research Institute 3412 Hillview Avenue Palo Alto, California 94303
Get access

Abstract

Significant changes in microstructure occur in many fossil plant components that operate for long times at elevated temperatures. Some examples include hydrogen damage in steam-generating boiler tubes, carbide coarsening in superheater tubes, creep cavitation in the heat-affected zones of thick-section weldments, and temper embrittlement in turbine rotors and disks. Quantitative estimates of the remaining useful lives of components affected by these damage mechanisms require that the degree of damage be determined and related to the life-limiting mechanisms.

The paper discusses recent progress in the development and field demonstration of nondestructive techniques for characterizing the damage types listed above. This research has produced several products that have achieved or are close to commercial status. The research has also helped to define some of the limitations related to access, sensitivity, and signal interpretation of the nondestructive techniques. The paper discusses how these limitations can often be mitigated by using several nondestructive techniques in concert to obtain a more complete picture of material condition or by removing small specimens for detailed laboratory analysis.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 142: Symposium U – Nondestructive Monitoring of Materials Properties , 1988 , 91
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Dooley, R. B. and Byron, J., “The EPRI Approach to Fossil Plant Life Extension,” in Proc. International Conference on Life Assessment and Extension, vol.1, pp. 101–105, The Hague, Netherlands, June 13–15, 1988.Google Scholar
[2] “Remaining Life Estimation of Boiler Pressure Parts, Volume 2: Miniature Specimen Creep Testing,” EPRI Report CS-5588, Vol.2, January, 1988.Google Scholar
[3] McMinn, A., Mercaldi, D., and Mauney, D., “Evaluation of Rotor Materials by Remote Sampling,” in Proc. of the Second EPRI Fossil Plant Inspections Conference, San Antonio, Texas, November 29-December 1, 1988.Google Scholar
[4] Akiyama, K., Shiota, T., Ikawa, H., Kwamoto, K., Goto, T., and Karato, H., “Life Assessment of Turbine Components by Integrated Techniques,” Proc. of the American Power Conference, Chicago, IL, April 27–29, 1987.Google Scholar
[5] Kadoya, Y., Karato, H., Goto, T., Kadoya, Y., and Kawamoto, K., “State of the Art NDE Techniques for Crack Initiation Life Assessment of High Temperature Rotors,” in Proc. International Conference on Life Assessment and Extension, vol.2, pp. 9–19, The Hague, Netherlands, June 13–15, 1988.Google Scholar
[6] Ishizaki, S., et al., “Nondestructive Residual Life Evaluation Techniques of Boiler Materials,” in Proc. International Conference on Life Assessment and Extension, vol.1, pp. 54–64, The Hague, Netherlands, June 13–15, 1988.Google Scholar
[7] Bissel, A.M., Cane, B.J., and Delong, J.F., “Remanent Life Assessment of Seam Welded Pipework,” in Proc. International Conference on Life Assessment and Extension, vol.2, pp. 203–211, The Hague, Netherlands, June 13–15, 1988.Google Scholar
[8] “Metallography and Stress Analysis of a Cracked First Stage Rim Attachment,” EPRI RP2481-6 Interim Report, May, 1988.Google Scholar
[9] “Emergency Standard Practice for Production and Evaluation of Field Metallographic Replicas,” ASTM Standard ES 12–87, American Society for Testing and Materials, Philadelphia, PA.Google Scholar
[10] Shammas, M.S., ”Metallographic Methods for Predicting the Remanent Life of Ferritic Coarse-Grained Weld Heat Affected Zones Subject to Creep Cavitation,” in Proc. International Conference on Life Assessment and Extension, vol.3, pp. 238–244, The Hague, Netherlands, June 13–15, 1988.Google Scholar
[11] Maguire, J. and Gooch, D. J., “Metallographic Techniques for Residual Life Assessment of 1CrMoV Rotor Forgings,” in Proc. International Conference on Life Assessment and Extension, vol.2, pp. 116–124, The Hague, Netherlands, June 13–15, 1988.Google Scholar
[12] “Remaining Life Estimation of Boiler Pressure Parts, Volume 3: A Metallographic Technique for Life Assessment of Parent iCrO.5Mo Steel,” EPRI Report CS-5588, vol.3 April, 1988.Google Scholar
[13] Papaclakis, E.P. in Physical Acoustics, Vol. 12, Mason, W.P. and Thurston, R.N., eds, pp. 228–374, Academic Press, New York, 1976.Google Scholar
[14] Klinman, R., et al., Materials Evaluation, 39, pp. 1116–1120 (1981).Google Scholar
[15] Willems, H., “Characterization of Creep Damage by Means of Ultrasonic Techniques,” in Proc. International Conference on Life Assessment and Extension, vol.2, pp. 86–91, The Hague, Netherlands, June 13–15, 1988.Google Scholar
[16] Birring, A.S., Alcazar, D.G., Hanley, J.J., Hendrix, G.J., and Gehl, S.M., “Detection of Hydrogen Damage by Ultrasonics,” in Boiler Tube Failures in Fossil Power Plants, EPRI CS-5500-SR, November, 1987.Google Scholar
[17] Birring, A.S., Alcazar, D.G., Hanley, J.J., and Gehl, S.M., “Ultrasonic Assessment of Creep and Hydrogen Damage in Fossil Plant Components,” in Proc. of the Second EPRI Fossil Plant Inspections Conference, San Antonio, Texas, November 29- December 1, 1988.Google Scholar
[18] Matzkanin, G.A., et al., “The Barkhausen Effect and Its Application to Nondestructive Evaluation,” Southwest Research Institute Report NTIAC-79-2, October, 1979.Google Scholar
[19] Gehl, S.M., Scheibel, J., Yavelak, J.J., and Lamping, G., “Advanced Inspection Technology for Plant Life Extension,” Jt. ASME/IEEE Power Generation Conference, Miami, FL, October 4–8, 1987, Paper No. 87-JPGC-Pwr-D.Google Scholar
[20] Yavelak, J.J. and Hickson, J., “Using BNA to Guide Boiler Condition Assessments,” in Proc. of the Second EPRI Fossil Plant Inspections Conference, San Antonio, Texas, November 29-December 1, 1988.Google Scholar
[21] “Grain Boundary Composition and Intergranular Fracture of Steels,” EPRI Report RD-3859. Vol.1, January, 1985, Vol.2, November, 1986.Google Scholar
[22] Richman, R.H., Cargill, R.L., Bruemmer, S.M., and Gehl, S.M., “Nondestructive Methods for Assessing Temper Embrittlement of In-Service Components,” in Proc. of the Second EPRI Fossil Plant Inspections Conference, San Antonio, Texas, November 29-December 1, 1988.Google Scholar