Hostname: page-component-78c5997874-94fs2 Total loading time: 0 Render date: 2024-11-19T11:41:43.415Z Has data issue: false hasContentIssue false
  • English
  • Français

Measurement of the residual macro and microstrain in strained Si/SiGe using Raman spectroscopy

Published online by Cambridge University Press:  17 March 2011

P. Dobrosz ,
S.J. Bull ,
S.H. Olsen  and
A.G. O'Neill
P. Dobrosz
Affiliation:
School of Chemical Engineering and Advanced Materials, University of Newcastle, Newcastle upon Tyne, NE1 7RU, UK
S.J. Bull
Affiliation:
School of Chemical Engineering and Advanced Materials, University of Newcastle, Newcastle upon Tyne, NE1 7RU, UK
S.H. Olsen
Affiliation:
School of Electrical, Electronic and Computer Engineering, University of Newcastle, Newcastle upon Tyne, NE1 7RU, UK
A.G. O'Neill
Affiliation:
School of Electrical, Electronic and Computer Engineering, University of Newcastle, Newcastle upon Tyne, NE1 7RU, UK
Get access

Abstract

The use of laser Raman spectroscopy to assess the residual strain in strained silicon/silicon germanium devices is well established. The peak shift associated with the 520cm−1 silicon peak can be used to directly measure the strain in the cap layer provided that the strained silicon peak can be deconvoluted from the more intense Si in SiGe peak which occurs at slightly lower wavenumbers. However, though peak position gives a measure of the macrostrains in the layer it is not useful for the assessment of microstrains associated with point defects which may also influence device performance; such microstrains influence the intensity of the Raman peaks and can, in principle, be monitored by this method. In this study we have undertaken a study of peak shape as a function of processing conditions for strained silicon on SiGe. Changes in peak position may be correlated with macrostrains and macrostrain relaxation around extended defects such as dislocations. Changes in peak width can be correlated with processes which lead to changes in composition (e.g. germanium build-up in the surface after etching) and microstrain. Such changes are not necessarily correlated with changes in macrostrain but indicate that microstrain could also be an important factor influencing device performance.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 809: Symposium B – High-Mobility Group-IV Materials and Devices , 2004 , B3.4
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Badcock, S.G., O'Neill, A.G. and Chester, E.G., Sol. St. Elec. 46 (2002) 1925.Google Scholar
[2] O'Neill, A.G. and Antoniadis, D.A., IEEE Trans. Electron Devices 43 (1996) 911.Google Scholar
[3] Takagi, S., Tezuka, T., Sugiyama, N.: Mater. Sci. Engi. B 89 (2002) 426.Google Scholar
[4] Matthews, J.W. and Blakeslee, A.E.: J. Cryst. Growth 27 (1974) 118.Google Scholar
[5] Anastassakis, E., Pinczuk, A., Burstein, E., Pollak, F.H., Cardona, M.: Solid State Commun. 8 (1970) 133.Google Scholar
[6] Woods, N.J., Breton, G., Graoui, H. and Zhang, J., J. Cryst. Growth, 227 (2001) 735.Google Scholar
[7] Schimmel, D.G., J. Electrochem. Soc., 126 (1979) 479.Google Scholar
[8] Wolf, I. De: Semiconduct. Sci. Technol. 11 (1996) 139.Google Scholar
[9] Siakavellas, M., Anastassakis, E., Kaltsas, G., Nassiopoulos, A.G.: Microelectr. Eng. 41–42 (1998) 469.Google Scholar
[10] Dobrosz, P., Bull, S.J., Olsen, S.H. and O'Neill, A.G., Z. Metall., in press (2004).Google Scholar
[11] Olsen, S.H., Driscoll, L.S., Kwa, K.S.K., Chattopadhyay, S., O'Neill, A.G.: Proceedings of Solid State Devices and Materials (2003) 722, published as an Extended Abstract.Google Scholar