Hostname: page-component-77c89778f8-9q27g Total loading time: 0 Render date: 2024-07-19T05:49:40.941Z Has data issue: false hasContentIssue false

Multi-Layer Coating of Ultrathin Polymer Films on Nanoparticles of Alumina by a Plasma Treatment

Published online by Cambridge University Press:  17 March 2011

Donglu Shi
Affiliation:
Dept. of Nuclear Engineering and Radiological Science, University of Michigan Ann Arbor, MI 48109
Zhou Yu
Affiliation:
Dept. of Nuclear Engineering and Radiological Science, University of Michigan Ann Arbor, MI 48109
S. X. Wang
Affiliation:
Department of Materials Science and Engineering, University of Cincinnati Cincinnati, OH 45221-0012
Wim J. van Ooij
Affiliation:
Dept. of Nuclear Engineering and Radiological Science, University of Michigan Ann Arbor, MI 48109
L. M. Wang
Affiliation:
Department of Materials Science and Engineering, University of Cincinnati Cincinnati, OH 45221-0012
J. G. Zhao
Affiliation:
Dept. of Nuclear Engineering and Radiological Science, University of Michigan Ann Arbor, MI 48109
Get access

Abstract

Multi-layer ultrathin polymer films have been deposited on the surfaces of nanoparticles of alumina using a plasma polymerization treatment. The nanoparticles ranged from 10-150 nm in spherical shapes. High-resolution transmission electron microscopy (HRTEM) experiments showed that an extremely thin film of the pyrrole layer (10-20 Å) was uniformly deposited on the surfaces of the nanoparticles. In particular, the particles of all sizes (10-150 nm) exhibited equally uniform ultrathin films indicating well-dispersed nanoparticles in the fluidized bed during the plasma treatment. After single layer coating, hexamethyldisiloxane (HMDSO) was coated again as a second layer onto the surface of pyrrole. Subsequently, a third layer of pyrrole was coated on the top of HMDSO film completing the multi-layer coating process. Time-of-Flight Secondary ion mass spectroscopy (TOFSIMS) experiments confirmed the deposition of these multi-layer thin films on the nanoparticles. The deposition mechanisms and the effects of plasma treatment parameters are discussed.

Type
Research Article
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Siegel, R. W., Nanostructured Materials, 3, 118, (1993).Google Scholar
2. Hadjipanayis, G. C. and Siegel, R. W., “Nanophase Materials: Synthesis-Properties-ApplicationsKluwer Press, Dordrecht, 1994.Google Scholar
3. Whitesides, G. M., Mathias, J. P., and Seto, C. T., Science, 254, 13121319, (1991).Google Scholar
4. Stucky, G. D. and MacDougall, J. E., Science, 247, 669678, (1990).Google Scholar
5. Gleiter, H., Nanostructured Materials, 6, 314 (1995).Google Scholar
6. Vollath, D. and Szabo, D. V., J. of Nanoparticle Research, 1, 235242, (1999).Google Scholar
7. Ooij, W.J. van, Eufinger, S., Ooij, W.J. van, and Ridgway, T.H., Journal of Appl. Pol. Sci., 61, 1503 (1996),Google Scholar
8. Ooij, W.J. van, Eufinger, S. and Ridgway, T.H., Plasma and Polymers, 1, 231 (1996).Google Scholar
9. Eufinger, S., Ooij, W. J. van, and Ridgway, T. H., Journal of Appl. Pol. Sci., 61, 1503 (1996).Google Scholar
10. Ooij, W. J. van, Eufinger, S., and Ridgway, T. H., Plasma and Polymers, 1, 231 (1996).Google Scholar
11. Shi, D., Wang, Shixin, Wang, Lumin, Ooij, W. J. van, Yu, Zhou, and Zhao, J. G., Appl. Phys. Lett. (2000), in press.Google Scholar