No CrossRef data available.
Article contents
Preparation of PbTiO3 Nanotubes by Electrophoretic Deposition Method and Effect of the Electrophoretic Voltage on the Wall Thickness
Published online by Cambridge University Press: 21 January 2014
Abstract
In the current research, we have utilized sol-gel electrophoresis technique to grow PbTiO3 nanotube arrays in porous anodic alumina template channels. By using this method high quality and more condense nanotubes are obtained compared with other usual sol-gel methods. Also, the effect of the anodizing parameters on the diameter of the template pores, and effect of electrophoresis voltage on wall thickness were investigated.
- Type
- Articles
- Information
- Copyright
- Copyright © Materials Research Society 2014
References
REFERENCES
Clemens, S., Schneller, T., van der Hart, A., Peter, F., and Iser, R., Registered deposition of nanoscale ferroelectric grains by template-controlled growth. Advanced Materials
17 (2005) 1357–1361.CrossRefGoogle Scholar
Clemens, S., Schneller, T., Iser, R., Rudiger, A., Peter, F., Kronholz, S., Schmitz, T., and Tiedke, S., Integration of ferroelectric PbTiO3 nanoislands for direct hysteresis measurements. Applied Physics Letters
87 (2005) 142904–142907.CrossRefGoogle Scholar
Rorvik, P.M., Tadanaga, K., Tatsumisago, M., Grande, T., and Einarsrud, M.A., Template-assisted synthesis of PbTiO3 nanotubes. Journal of the European Ceramic Society
29 (2009) 2575–2579.CrossRefGoogle Scholar
Fujisawa, H., Kuri, R., Nakashima, S., Shimizu, M., Kotaka, Y., and Honda, K., Synthesis of PbTiO3 Nanotubes by Metalorganic Chemical Vapor Deposition. Japanese Journal of Applied Physics
48 (2009) 09KA05 (4 pages).CrossRefGoogle Scholar
Yang, Y., Wang, X.H., Zhong, C.F., Sun, C.K., Yao, G.F., and Li, L.T., Synthesis and Growth Mechanism of PbTiO3 Nanotube Arrays by Hydrothermal Method. Journal of the American Ceramic Society
91 (2008) 3388–3390.CrossRefGoogle Scholar
Hernandez, B.A., Chang, K.S., Fisher, E.R., and Dorhout, P.K., Sol-gel template synthesis and characterization of BaTiO3 and PbTiO3 nanotubes. Chemistry of Materials
14 (2002) 480–482.CrossRefGoogle Scholar
Macak, J. M., Zollfrank, C., Rodriguez, B. J., Tsuchiya, H., Alexe, M., Creil, P., and Schmuki, P., "Ordered Ferroelectric PbTiO3 Nanocellular Structure by Conversion of Anodic TiO2 Nanotubes," Advanced Materials
21, 3121–3125 (2009).CrossRefGoogle Scholar
Liu, T.Y.N. L. F., Ren, Y., Sun, Z. H., Wang, F. F., Zhou, W. Y., Xie, S. S., Song, L., Luo, S. D., Liu, D., Shen, J., Ma, W., and Zhou, Y., Synthesis, characterization, photoluminescence and ferroelectric properties of PbTiO3 nanotube arrays. Materials Science and Engineering B-Advanced Functional Solid-State Materials
149 (2008) 41–46.Google Scholar
Gruverman, Alexei, Auciello, Orlando, Tokumoto, Hiroshi, Imaging and Control of Domain Structures in Ferroelectric Thin Films via Scanning Force Microscopy", Ann. Rev. of Mat. Science
28, 101–124 (1998).CrossRefGoogle Scholar
Hirashima, Y.o. H., Nagai, T., Imai, H., Preparation of Sol-Gel coatings by Electrophoretic Deposition. Materials Research Society (1994).CrossRefGoogle Scholar
Wang, W., Rao, J.C., Ke, H., Feng, M., Xia, R.L., Meng, Q.C., Jia, D.C., and Zhou, Y., Electrophoretic sol-gel synthesis of SrBi2Ta2O9 nanowires. Journal of Sol-Gel Science and Technology
56 (2010) 87–92.CrossRefGoogle Scholar
Lanki, M., Nourmohammadi, A., and Feiz, M. H., A precise Investigation of Lead partitioning in sol-gel derived PbTiO3 Nanopowders, Ferroelectrics (Taylor and Francis)
448: 123–133(2013).CrossRefGoogle Scholar
Nourmohammadi, Abolghasem, Asadabadi, Saeed Jalali, Yusefi, Mohammad Hasan, Ghasemzadeh, Majid, Photoluminescence emission of nanoporous anodic aluminum oxide films prepared in phosphoric acid, Nanoscale Research Letters
7, 689(2012).CrossRefGoogle ScholarPubMed
Lanki, M., Nourmohammadi, A., and Feiz, M. H., Electrophoretic Growth of PbTiO3 Nanotubes, Ferroelectrics (Taylor and Francis)
448:134–144(2013).CrossRefGoogle Scholar