Hostname: page-component-cd9895bd7-fscjk Total loading time: 0 Render date: 2024-12-26T05:58:08.098Z Has data issue: false hasContentIssue false
  • English
  • Français

Preparation of Sol-Gel Coatings by Electrophoretic Deposition

Published online by Cambridge University Press:  21 February 2011

Hiroshi Hirashima ,
Yusuke Obu ,
Takayuki Nagai  and
Hiroaki Imai
Hiroshi Hirashima
Affiliation:
Keio University, Faculty of Science and Technology 3-14-1, Hiyoshi, Kohoku-ku, Yokohama, 223 Japan
Yusuke Obu
Affiliation:
Keio University, Faculty of Science and Technology 3-14-1, Hiyoshi, Kohoku-ku, Yokohama, 223 Japan
Takayuki Nagai
Affiliation:
Keio University, Faculty of Science and Technology 3-14-1, Hiyoshi, Kohoku-ku, Yokohama, 223 Japan
Hiroaki Imai
Affiliation:
Keio University, Faculty of Science and Technology 3-14-1, Hiyoshi, Kohoku-ku, Yokohama, 223 Japan
Get access

Abstract

Thin films of ZrO2 and lead zirconate-titanate, PZT, about 100 to 1000 nm in thickness, were prepared by electrophoretic deposition from transparent sols obtained by hydrolysis of metal alkoxides. Stainless steel plates and Pt-coated glass plates were used as substrates/electrodes. The applied field was up to 20 V/cm. The refractive indices of as dried films were higher than those of dip-coated films. High temperature oxidation of stainless steel plates was suppressed by the ZrO2 coatings. Uniformity of the chemical composition of the as-dried PZT films, determined by Auger electron spectroscopy, was better than the dip-coated PZT films.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 346: Symposium N – Better Ceramics Through Chemistry VI , 1994 , 95
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Uhlmann, D.R. and Rajendran, G.P., in Ultrastructure Processing of Advanced Materials, edited by Mackenzie, J.D. and Ulrich, D.R. (J. Wiley & Sons, New York, 1988)pp.241-253.Google Scholar
2 Scriven, L.E., in Better Ceramics Through Chemistry III, edited by Brinker, C.J., Clark, D.E. and Ulrich, D.R. (Mater. Res. Soc. Proc, 121, Pittsburgh, PA, 1988)pp.717-729.Google Scholar
3 Zhang, Y., Brinker, C.J. and Crooks, R.M., in Better Ceramics Through Chemistry V, edited by Hampden-Smith, M.J., Klemperer, W.G. and Brinker, C.J. (Mater. Res. Soc. Proc, 271, Pittsburgh, PA, 1992)pp.465-470.Google Scholar
4 Tursiloady, S., Ms. Thesis, Keio University, 1991.Google Scholar
5 Parks, G.A., Chem. Rev., 65, 177 (1965).Google Scholar