Hostname: page-component-78c5997874-s2hrs Total loading time: 0 Render date: 2024-11-18T05:52:06.852Z Has data issue: false hasContentIssue false
  • English
  • Français

Processing and Properties of Some Alumina-Boride Composites

Published online by Cambridge University Press:  15 February 2011

Mohan J. Edirisinghe
Mohan J. Edirisinghe*
Affiliation:
Department of Materials TechnologyBrunel University, Uxbridge, Middlesex, UB8 3PH, U.K.
Get access

Abstract

Alumina (Al2O3) test bars containing a small (5-10%) volume of titanium diboride (TiB2) or zirconium diboride (ZrB2) particles have been pressed and sintered (pressureless) in an argon atmosphere. The microstructure of the sintered bodies was characterized by X-ray diffraction and a range of microscopical techniques and shows that 3ppm (by volume) of oxygen present in the argon caused the boride particles in the surface regions of the test bars to oxidize during sintering, to a greater extent in the Al2O3-TiB2 composites. Mechanisms of oxidation are discussed. The boride particles retarded the densification of the composites, to a greater extent in the Al2O3-ZrB2 bodies. However, densification in the Al2O3-ZrB2 system was enhanced by sintering in an Ar-4% H2 atmosphere. The decrease in flexural strength due to the retardation of sintering has been overcome in both types of composite.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 365: Symposium M – Ceramic Matrix Composites–Advanced High-Temperature Structural Materials , 1994 , 119
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Beckher, P.F., J. Amer. Ceram. Soc., 74, 255 (1991).Google Scholar
2. Rice, R., in Advanced Ceramic Processing and Technology, Vol. 1, edited by Binner, J.E.P. (Noyes Publications, NJ, USA, 1990) p. 123.Google Scholar
3. Shakashita, K., Japanese Patent 64-8224 (January 1989).Google Scholar
4. Nakamura, Y. and Kurata, K., Japanese Patent 62-187158 (August 1987).Google Scholar
5. Ichinoseki, K. and Furata, T., Japanese Patent 1-188460 (July 1989).Google Scholar
6. Radford, K.C., J. Mater. Sci., 18, 669 (1983).Google Scholar
7. Idem, ibid, 18, 679 (1983).Google Scholar
8. Ashworth, D.R., J. Brit. Ceram. Soc., 6, 70 (1969).Google Scholar
9. Cuttler, R.A., in Engineered Materials Handbook, Vol. 4 (ASM International, The Materials Info. Soc., USA, 1991) p.787.Google Scholar
10. Samsonov, G.V., Handbook of High Temperature Materials No. 2: Properties Index (Plenum Press, NY, USA, 1964) p.274.Google Scholar
11. Pampuch, R., Haberko, K. and Kordek, M., Nauka o Procesach Ceramicznych (Wydawnictwo Naukowe PWN, Warsaw, Poland, 1992) p. 116.Google Scholar
12. Dörre, E. and Hübner, H., Alumina (Springer-Verlag, Berlin, Germany, 1984) p.62.Google Scholar