Hostname: page-component-78c5997874-ndw9j Total loading time: 0 Render date: 2024-11-19T12:09:49.275Z Has data issue: false hasContentIssue false

Single-Source Approach for The Growth of I-III-VI Thin Films

Published online by Cambridge University Press:  01 February 2011

Mohammad Afzaal
Affiliation:
The Manchester Materials Science Centre and Department of Chemistry, University of Manchester, Oxford Road, Manchester, M13 9PL, UK.
Theivanayagam C. Deivaraj
Affiliation:
Dept of Chemistry, 3 Science Drive 3, National University of Singapore, Singapore.
Paul O'Brien
Affiliation:
The Manchester Materials Science Centre and Department of Chemistry, University of Manchester, Oxford Road, Manchester, M13 9PL, UK.
Jin-Ho Park
Affiliation:
The Manchester Materials Science Centre and Department of Chemistry, University of Manchester, Oxford Road, Manchester, M13 9PL, UK.
Jagadese J. Vittal
Affiliation:
Dept of Chemistry, 3 Science Drive 3, National University of Singapore, Singapore.
Get access

Abstract

The ternary chalcopyrite semiconductors I-III-VI are currently used for photovoltaic solar cell applications. In this study, AgIn5S8 thin films were prepared from a series of single-source bimetalorganic precursors, e.g. [(PPh3)2AgIn(SC{O}R)4] (R = alkyl) by aerosol assisted chemical vapour deposition (AA-CVD). The compounds can be used as single-source precursors for the deposition of ternary compounds (I-III-VI) by one-pot reaction using CVD process and they are found to be air stable, which is favourable in comparison with metal alkyl compounds, which are found to be pyrophoroic. The optimum growth temperature for the preparation of these films on glass and Si(100) substrates, was found to be above 350°C in terms of crystallinity, although deposition occurred at low temperatures. The films have been investigated using XRD, SEM and EDS. SEM analysis shows that all films are microcrystalline but have different morphologies depending on the growth temperatures. XRD results show evidence of the crystalline nature of these films. The results of this comprehensive study are presented and discussed.

Type
Research Article
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Bochmann, M., Chem. Vap. Deposition, 2, 85 (1996).Google Scholar
2. O'Brien, P. and Nomura, R., J. Mater. Chem. 5, 1761 (1995).Google Scholar
3. Gleizes, A.N., Chem. Vap. Deposition, 6, 155 (2000).Google Scholar
4. Lazell, M., O'Brien, P., Otway, D.J. and Park, J.-H., J. Chem. Soc., Dalton Trans. 4479 (2000).Google Scholar
5. Abrahams, S.C. and Bernstein, J.L., J. Chem. Phys. 59, 1625 (1973).Google Scholar
6. Yonenaga, I., Sumino, K., Niwa, E. and Masumoto, K., J. Cryst. Growth 167, 616 (1996).Google Scholar
7. Usujima, A., Takeuchi, S., Endo, S. and Irie, T., Jpn. J. Appl. Phys., Part 2 20, L505 (1981).Google Scholar
8. Ueno, Y., Hattori, Y., Ito, M., Sugiura, T. and Minoura, H., Sol. Energy Mater. Sol. Cells 26, 229 (1992).Google Scholar
9. Gasanly, N.M., Serpengüzel, A., Aydinli, A., Gürlü, O. and Yilmaz, I, J. Appl. Phys. 85, 3198 (1999).Google Scholar
10. Shang, G., Hampden-Smith, M.J. and Duesler, E.N., Chem. Commun. 1733 (1996).Google Scholar
11. Nyman, M. D., Hampden-Smith, M. J. and Duesler, E. N., Inorg. Chem. 36, 2218 (1997).Google Scholar
12. Nyman, M. D., Jenkins, K., Hampden-Smith, M.J., Kodas, T.T., Duesler, E.N., Rheingold, A.L. and Liable-Sands, M.L., Chem. Mater. 10, 914 (1998).Google Scholar
13. Hollingsworth, J. A., Hepp, A. F. and Buhro, W. E., Chem. Vap. Deposition 5, 105 (1999).Google Scholar
14. Hirpo, W., Dhingra, S., Sutorik, A. C. and Kanatzidis, M. G., J. Am. Chem. Soc. 115, 1597 (1993).Google Scholar
15. Banger, K. K., Harris, J. D., Cowen, J. E. and Hepp, A. F., Thin Solid Films 403-404, 390 (2002).Google Scholar