Hostname: page-component-848d4c4894-nmvwc Total loading time: 0 Render date: 2024-07-07T07:40:50.133Z Has data issue: false hasContentIssue false
  • English
  • Français

Ultra-Low Damage Chemical Etching of GaAs with a Novel Ion Beam Source

Published online by Cambridge University Press:  25 February 2011

Judith Beckman  and
Richard B. Jackman
Judith Beckman
Affiliation:
University College London, Electronic and Electrical Engineering, Torrington Place, London, WC1E 7JE, UK
Richard B. Jackman
Affiliation:
University College London, Electronic and Electrical Engineering, Torrington Place, London, WC1E 7JE, UK
Get access

Abstract

A novel ion beam source has been successfully used in both a CAIBE and RIBE configuration, with chlorine as the chemically active gas, to achieve GaAs etching a rates of around 0.1 µm/hour. The energy of species within the beam from the source is estimated at 10 - 25eV. Under these conditions it can be expected that little or no penetration into the GaAs lattice occurs and that the principle origin of lattice disruption, prior to etching, is chemical; a low damage GaAs etching process results. The source, however, gives rise to a coating, derived from the source liner, which must be washed from all etched samples. The presence of such a coating is likely to be the origin of the slow etch rate achieved. After removal of the coating, smooth, mirror like etched surfaces are apparent. These surfaces perform very well when Schottky diodes are constructed from them showing no deviation from the behaviour of control samples.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 268: Symposium K – Materials Modification by Energetic Atoms and Ions , 1992 , 35
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Tadokoro, T, Koyama, F and Iga, K J. Vac. Sci. Tech., B7 (1989), 1111 CrossRefGoogle Scholar
2. Zalm, PC, Vacuum 36 (1986), 787 CrossRefGoogle Scholar
3. Weller, RA, Nucl. Instr. Meth. Phys. Res., 194 (1982), 573 Google Scholar
4. Scherer, A, Craighead, HG, Roukes, ML and Harbison, JP J. Vac. Sci. Tech., P6 (1988), 277 CrossRefGoogle Scholar
5. Tyrrell, GC, Marshall, D, Beckman, J and Jackman, RB J. Phys. (condens. mat.), 3 (1991), S179 Google Scholar
6. Ono, T, Kashima, H, Hiraoka, S, Suzuki, K and Jahnke, A J. Vac. Sci. Tech., B9 (1991). 2798 CrossRefGoogle Scholar
7. Evans, AC, Franks, J and Jolly, H Proc. 8th Int. Ion and Plasma Ass. Tech. (IPAT'91), p309 Google Scholar
8. Tadokoro, T, Koyama, F and Iga, k Jap. J. Appl. Phys., 27 (1988), 389 Google Scholar
9. Pearton, SJ, Nakano, T and Gottscho, RA J. Appl. Phys., 69 (1991), 4206 CrossRefGoogle Scholar
10. Hara, T, Hiyoshi, J, Hamanaka, H, Sasaki, M, Kobayashi, F, Ukai, K and Okada, T J. Appl. Phys., 67 (1990), 2836 CrossRefGoogle Scholar
11. Beckman, J and Jackman, RB To be sub. Appl. Phys. Letts..Google Scholar