12th August 2024: digital purchasing is currently unavailable on Cambridge Core. Due to recent technical disruption affecting our publishing operation, we are experiencing some delays to publication. We are working hard to restore services as soon as possible and apologise for the inconvenience. For further updates please visit our website: https://www.cambridge.org/news-and-insights/technical-incident
We use cookies to distinguish you from other users and to provide you with a better experience on our websites. Close this message to accept cookies or find out how to manage your cookie settings.
This journal utilises an Online Peer Review Service (OPRS) for submissions. By clicking "Continue" you will be taken to our partner site
https://mc.manuscriptcentral.com/cup/robotica.
Please be aware that your Cambridge account is not valid for this OPRS and registration is required. We strongly advise you to read all "Author instructions" in the "Journal information" area prior to submitting.
To save this undefined to your undefined account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you used this feature, you will be asked to authorise Cambridge Core to connect with your undefined account.
Find out more about saving content to .
To save this article to your Kindle, first ensure coreplatform@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below.
Find out more about saving to your Kindle.
Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
Flexible endoscopy is the gold standard modality for diagnosis and therapeutic intervention of various colorectal conditions. A high bar is currently set for any new technology to replace the current modern colonoscope, but limitations do exist. For a robotic system to gain acceptance, ideally a clear advantage over the established standard needs to be demonstrated. The application of robotic technology inspired by locomotion observed in animals has been demonstrated in many fields including colonoscopy. A myriad of novel concepts has been proposed, which can overcome the anatomical and technical challenges.
This review discusses novel and innovative examples of bioinspired robotic locomotion in the colon with a detailed comparison of studies alongside separating the discussion by animal sections of insect, marine and reptile locomotion. We also discuss the current advantages and challenges a bioinspired robot will bring to the colon.
Bioinspired robotics in the colon is an exciting field of research with the potential to improve upon current existing high standards of practice in colonoscopy. By addressing areas that the conventional colonoscope is weaker in, studies are demonstrating improvement upon current limitations of standard practice and providing an insight into new methods of engineering and fabrication. Focus on the technological, mechanical and regulatory barriers is key to achieve acceptance into standard practice and will allow the aspiration of a safe, low discomfort, low cost and potentially fully autonomous robotic colonoscope to be not too distant in the future of colonoscopy.
Resorbable materials – or materials which diffuse into their surroundings – present a promising means of actuating mechanical systems. In current practice, such as in the realm of in vivo surgical devices, resorbable materials are intended to perform a temporary function and completely dissolve when that function is completed (e.g., resorbable sutures). In this paper, resorbable materials are proposed for use in a different way: as a means for actuation. We propose an approach and physical prototypes to demonstrate that resorbable materials, combined with stored energy, can be used to actuate mechanical systems under several loading conditions and in various applications. Rotary and linear actuation methods, as well as gradual and delayed instantaneous actuations, are demonstrated. Using the principles illustrated here, resorbable materials offer unique, customizable ways to actuate a variety of mechanisms in a wide range of domains.
Motion planning for high-DOF multi-arm systems operating in complex environments remains a challenging problem, with many motion planning algorithms requiring evaluation of the minimum collision distance and its derivative. Because of the computational complexity of calculating the collision distance, recent methods have attempted to leverage data-driven machine learning methods to learn the collision distance. Because of the significant training dataset requirements for high-DOF robots, existing kernel-based methods, which require $O(N^2)$ memory and computation resources, where $N$ denotes the number of dataset points, often perform poorly. This paper proposes a new active learning method for learning the collision distance function that overcomes the limitations of existing methods: (i) the size of the training dataset remains fixed, with the dataset containing more points near the collision boundary as learning proceeds, and (ii) calculating collision distances in the higher-dimensional link $SE(3)^n$ configuration space – here $n$ denotes the number of links – leads to more accurate and robust collision distance function learning. Performance evaluations with high-DOF multi-arm robot systems demonstrate the advantages of the proposed active learning-based strategy vis-$\grave{\text{a}}$-vis existing learning-based methods.
The paper presents the control architecture of a crawler mobile robot designed and developed to sample potentially contaminated lands. The robot, developed in the framework of an Italian national project named ROBILAUT, carries a driller with a customized sampling mechanism to implement on-site the required quartering, and it is controlled to move the drilling device on specific points acquired in real time before the mission starts. The paper describes the software architecture for the navigation and control, focusing on the control framework of the robotic platform. Specifically, the robot exhibits a differential drive kinematics with actuators’ constraints, and two different control strategies have been experimentally tested for comparison both in a structured environment and in the real site in May 2023.
This article describes a robot walker based on a new single degree-of-freedom six-bar leg mechanism that provides rectilinear, non-rotating, movement of the foot. The walker is statically stable and requires only two actuators, one for each side, to provide effective walking movement on a flat surface. We use Curvature Theory to design a four-bar linkage with a flat-sided coupler curve and then adds a translating link so that walker foot follows this coupler curve in rectilinear movement. A prototype walker was constructed that weighs 1.6 kg, is 180 mm tall, and travels at 162 mm/s. This is an innovative legged robot that has a simple reliable design.
The demand for flexible grasping of various objects by robotic hands in the industry is rapidly growing. To address this, we propose a novel variable stiffness gripper (VSG). The VSG design is based on a parallel-guided beam structure inserted by a slider from one end, allowing stiffness variation by changing the length of the parallel beams participating in the system. This design enables continuous adjustment between high compliance and high stiffness of the gripper fingers, providing robustness through its mechanical structure. The linear analytical model of the deflection and stiffness of the parallel beam is derived, which is suitable for small and medium deflections. The contribution of each parameter of the parallel beam to the stiffness is analyzed and discussed. Also, a prototype of the VSG is developed, achieving a stiffness ratio of 70.9, which is highly competitive. Moreover, a vision-based force sensing method utilizing ArUco markers is proposed as a replacement for traditional force sensors. By this method, the VSG is capable of closed-loop control during the grasping process, ensuring efficiency and safety under a well-defined grasping strategy framework. Experimental tests are conducted to emphasize the importance and safety of stiffness variation. In addition, it shows the high performance of the VSG in adaptive grasping for asymmetric scenarios and its ability to flexible grasping for objects with various hardness and fragility. These findings provide new insights for future developments in the field of variable stiffness grippers.
In this article, we review the main results achieved by the research activities carried out at PRISMA Lab of the University of Naples Federico II where, for 35 years, an interdisciplinary team of experts developed robots that are ultimately useful to humans. We summarize the key contributions made in the last decade in the six research areas of dynamic manipulation and locomotion, aerial robotics, human-robot interaction, artificial intelligence and cognitive robotics, industrial robotics, and medical robotics. After a brief overview of each research field, the most significant methodologies and results are reported and discussed, highlighting their cross-disciplinary and translational aspects. Finally, the potential future research directions identified are discussed.
Multibody dynamics methodologies have been fundamental tools utilized to model and simulate robotic systems that experience contact conditions with the surrounding environment, such as in the case of feet and ground interactions. In addressing such problems, it is of paramount importance to accurately and efficiently handle the large body displacement associated with locomotion of robots, as well as the dynamic response related to contact-impact events. Thus, a generic computational approach, based on the Newton–Euler formulation, to represent the gross motion of robotic systems, is revisited in this work. The main kinematic and dynamic features, necessary to obtain the equations of motion, are discussed. A numerical procedure suitable to solve the equations of motion is also presented. The problem of modeling contacts in dynamical systems involves two main tasks, namely, the contact detection and the contact resolution, which take into account for the kinematics and dynamics of the contacting bodies, constituting the general framework for the process of modeling and simulating complex contact scenarios. In order to properly model the contact interactions, the contact kinematic properties are established based on the geometry of contacting bodies, which allow to perform the contact detection task. The contact dynamics is represented by continuous contact force models, both in terms of normal and tangential contact directions. Finally, the presented formulations are demonstrated by the application to several robotics systems that involve contact and impact events with surrounding environment. Special emphasis is put on the systems’ dynamic behavior, in terms of performance and stability.
Fiber winding reinforcement is widely used in soft robotic manipulators actuated by pressurized fluids. However, the specific effect of each type of winding on the bending motion of a tubular soft robotics manipulator with three chambers has not been explored widely. We present the development of precise finite element (FE) simulations and investigate the effect of helical fiber winding parameters on the bending motion of a two-degree-of-freedom manipulator with three internal chambers. We first show the development of an FE simulation that optimizes convergence and computational time and precisely matches the behavior of soft robots in practice. Compared to single-chamber robots, simulating three-chamber designs is more challenging due to the complex geometry. We then apply our FE model to simulate all the parameter variations. We show that for helical winding with a constant pitch, the closer the center of a chamber is to the intersection of the windings, the lower the bending stiffness of the chamber is. To minimize bending stiffness variation in different bending directions, the optimal angle between the center of the first chamber and the intersection of the two helical windings are 0° and 12°. Reducing the pitch of the helical windings or using other types of windings (i.e., ring winding or six helical winding) reduces the stiffness variation across different bending directions. The FE simulations are compared with experiments showing that the model can capture complex bending behaviors of the manipulator, even though the estimation tends to be less accurate at higher bending angles.