Hostname: page-component-7479d7b7d-c9gpj Total loading time: 0 Render date: 2024-07-12T04:57:54.387Z Has data issue: false hasContentIssue false

Photocurrent simulation in an n-p-n-p silicon multilayer solar cell

Published online by Cambridge University Press:  27 April 2005

A. Bouzidi*
Affiliation:
Laboratory of Photovoltaic and Semiconductor Materials (LPMS), ENIT, PO Box 37 Tunis, 1012 Tunis-Belvedere, Tunisia
A. S. Bouazzi
Affiliation:
Laboratory of Photovoltaic and Semiconductor Materials (LPMS), ENIT, PO Box 37 Tunis, 1012 Tunis-Belvedere, Tunisia
B. Rezig
Affiliation:
Laboratory of Photovoltaic and Semiconductor Materials (LPMS), ENIT, PO Box 37 Tunis, 1012 Tunis-Belvedere, Tunisia
Get access

Abstract

In this work, we simulate and optimize the photocurrent densities in a model of an n-p-n-p type thin film multilayer silicon solar cell for space applications. The incident light penetrates the cell perpendicularly to the junctions. The electrodes tailored inside the structure connect the n-layers together and the p-layers together. The equations giving the photocurrent density produced in each abscissa of the structure was developed. We used Matlab software to simulate and optimize the different parameters of the model. The results of simulation show that the optimized n-p-n-p silicon multilayer solar cell could deliver a photocurrent density of more than 46 mA/cm2 under Air Mass 0 (AM0) solar spectrum (solar constant of 1.36 KW/cm2) and that the photocurrent density produced by the n-p-n-p multilayer silicon solar cell is at least 10% higher than the photocurrent density produced by the simple n-p junction solar cell. We also show that the most important components of the total photocurrent densities (94%) is due to the minority carrier collection which happens on both side of the three space charge regions tailored inside the cell.

Keywords

Type
Research Article
Copyright
© EDP Sciences, 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Merabtine, N. et al., Quantum Electron. Optoelectron. 7, 108 (2004)
Bouazzi, A.S., Abaab, M., Rezig, B., Sol. Energ. Mat. Sol. C. 46, 29 (1997) CrossRef
Brecl, K., Smole, F., Furlan, J., Prog. Photovoltaïcs 7, 449 (1999) 3.0.CO;2-U>CrossRef
A.S. Bouazzi, M. Selmi, Sol. Energ. Mat. Sol. C. (in press)
Ba, B., Kane, M., Sarr, J., Sol. Energ. Mat. Sol. C. 80, 143 (2003) CrossRef
J.M. Roman, State of the art of III–V solar cell fabrication technologies, devices designs and applications, Advanced Photovoltaic Cell Design EN548, April 2004
M.J. Keevers, P.P. Altermatt, 16th European Photovoltaic Solar Energy Conference, Glasgow, UK, 1–5 May 2000
M.A. Green, J. Zhao, G.-F. Zheng, 14th European Photovoltaic Solar Energy Conference and Exhibition, Barcelona, 30 June–4 July 1997
J. Zhao, A. Wang, G.-F. Zheng, S.R. Wenham, M.A. Green, 13th European Photovoltaic Solar Energy Conference, October 1995
Green, M.A., Wenham, S.R., Appl. Phys. Lett. 65, 2907 (1994) CrossRef