Hostname: page-component-78c5997874-j824f Total loading time: 0 Render date: 2024-11-19T11:57:10.133Z Has data issue: false hasContentIssue false
  • English
  • Français

A simple model for the deposition of W-O coatings by reactive gas pulsing process

Published online by Cambridge University Press:  30 April 2008

N. M. G. Parreira ,
T. Polcar ,
N. J. M. Carvalho  and
A. Cavaleiro
N. M. G. Parreira
Affiliation:
SEG-CEMUC – Department of Mechanical Engineering, University of Coimbra, 3030-788 Coimbra, Portugal
T. Polcar
Affiliation:
SEG-CEMUC – Department of Mechanical Engineering, University of Coimbra, 3030-788 Coimbra, Portugal Department of Control Engineering, Faculty of Electrical Engineering, Czech Technical University in Prague, Technická 2, Prague 166 27, Czech Republic
N. J. M. Carvalho
Affiliation:
NV Bekaert SA, Bekaertstraat 2, 8550 Zwevegem, Belgium
A. Cavaleiro*
Affiliation:
SEG-CEMUC – Department of Mechanical Engineering, University of Coimbra, 3030-788 Coimbra, Portugal
*
albano.cavaleiro@dem.uc.pt
Get access

Abstract

In this study we will present a simple semi-empirical method to predict the chemical composition and the deposition rate of tungsten oxide coatings deposited by magnetron sputtering with reactive gas pulsing process (RGPP) as a function of two easily measured deposition parameters: target potential and total pressure. The coatings were deposited by DC magnetron sputtering from a pure tungsten target in reactive atmosphere (Ar + O2) using the conventional process (CP) with constant oxygen flow and the RGPP. The oxygen flow was varied from 0 (pure tungsten deposition) to 20 sccm corresponding to tungsten trioxide during the conventional process. When RGPP was used, a 20 sccm oxygen flow was pulsed using a square regulation signal, defined by a pulsing period (T) and an oxygen injection time (t ON ). The conventional and RGPP process parameters (target potential, total pressure and deposition rate) and the corresponding chemical composition were used to build a simple model predicting the deposition rate and the average chemical composition of the coatings deposited by RGPP as a function of the pulsing parameters. It was shown that the measured total pressure could be used to calculate the deposition rate and the chemical composition of the RGPP coatings with reasonable precision.

Keywords

Type
Research Article
Information
The European Physical Journal - Applied Physics , Volume 43 , Issue 3: Topical Issue ITFPC (Innovations on Thin Films Processing and Characterisation) , September 2008 , pp. 321 - 325
Copyright
© EDP Sciences, 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

D.M. Mattox, Handbook of physical vapor deposition (PVD) processing (Noyes Publications, New Jersey, 1998)
Safi, I., Surf. Coat. Technol. 127, 203 (2000) CrossRef
Aronson, A.J., Chen, D., Class, W.H., Thin Solid Films 72, 535 (1980) CrossRef
Martin, N., Bally, A.R., Hones, P., Sanjinés, R., Lévy, F., Thin Solid Films 377, 550 (2000) CrossRef
Parreira, N.M.G., Polcar, T., Cavaleiro, A., Surf. Coat. Technol. 201, 5481 (2006) CrossRef
Parreira, N.M.G., Polcar, T., Cavaleiro, A., Plasma Process. Polym. 4, 62 (2007) CrossRef
Kubart, T., Kappertz, O., Nyberg, T., Berg, S., Thin Solid Films 515, 421 (2006) CrossRef
Kubart, T., Polcar, T., Kappertz, O., Parreira, N.M.G., Nyberg, T., Berg, S., Cavaleiro, A., Plasma Process. Polym. 4, S522 (2007) CrossRef
Parreira, N.M.G., Polcar, T., Cavaleiro, A., Surf. Coat. Technol. 201, 7076 (2007) CrossRef
Parreira, N.M.G., Carvalho, N.J.M., Cavaleiro, A., Thin Solid Films 510, 191 (2006) CrossRef
Musil, J., Baroch, P., Vlcek, J., Nam, K.H., Han, J.G., Thin Solid Films 475, 208 (2005) CrossRef