Hostname: page-component-7479d7b7d-8zxtt Total loading time: 0 Render date: 2024-07-12T11:27:18.464Z Has data issue: false hasContentIssue false

Flat-topped beam forming experiment for microwave power transfer system to a vehicle roof

Published online by Cambridge University Press:  13 April 2015

Takaki Ishikawa*
Affiliation:
Research Institute for Sustainable Humanosphere, Kyoto University, Gokasho, Uji, Kyoto, 6110011, Japan
Naoki Shinohara
Affiliation:
Research Institute for Sustainable Humanosphere, Kyoto University, Gokasho, Uji, Kyoto, 6110011, Japan
*
Corresponding author: T. Ishikawa Email: i-takaki@rish.kyoto-u.ac.jp
Get access

Abstract

We proposed and examined a microwave power transfer system for electric vehicles (EVs). In this system, electricity is transmitted from a transmitting antenna over an EV to a receiving antenna on the roof of the EV. We used a rectenna to convert the received microwave power to direct current power. The conversion efficiency of a rectenna array is affected by the input power level distribution, and we have to form a flat-topped beam pattern to increase the conversion efficiency. We conducted an experiment to form a flat-topped beam pattern by using a phased array antenna. In this experiment, the output power of each antenna element is uniform and cannot be controlled independently. Hence, we controlled only the output phases of each antenna element and formed a flat-topped beam pattern. The distance between the transmitting antenna and the receiving area is 6.45 m, and the receiving area corresponds to a space in which the azimuth and elevation are in the range of −5°–5°.

Type
Research Article
Copyright
Copyright © Cambridge University Press 2015 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Hori, Y.: Novel EV society based on motor/capacitor/wireless – application of electric motor, supercapacitors, and wireless power transfer to enhance operation of future vehicles, in Proc. IEEE MTT-S IMWS-IWPT 2012, Kyoto, Japan, May 2012, 3–8.Google Scholar
[2] Russer, J.A.; Russer, P.: Design considerations for a moving field inductive power transfer system, in Proc. IEEE WPTC 2013, Perugia, Italy, May 2013, 147–150.Google Scholar
[3] Ohira, T.: Via-wheel power transfer to vehicles in motion, in Proc. IEEE WPTC 2013, Perugia, Italy, May 2013, 242–246.CrossRefGoogle Scholar
[4] Shin, J. et al. : Design and implementation of shaped magnetic-resonance-based wireless power transfer system for roadway-powered moving electric vehicles. IEEE Trans. Ind. Electron., 61 (3) (2014), 11791192.Google Scholar
[5] Shinohara, Y.: Wireless Power Transfer via Radiowaves, ISTE Publishing and John Wiley & Sons, Inc., Great Britain and United States, 2014.Google Scholar
[6] Shinohara, N.; Kubo, Y.; Tonomura, H.: Wireless charging for electric vehicle with microwaves, in Proc. EDPC 2013, Nuremberg, Germany, October 2013, 1–4.Google Scholar
[7] Kubo, Y.; Shinohara, N.; Mitani, T.: Development of a kW class microwave power supply system to a vehicle roof, in Proc. IEEE MTT-S IMWS-IWPT 2012, Kyoto, Japan, May 2012, 205–208.Google Scholar
[8] Brown, W.C.: Adapting microwave techniques to help solve future energy problems. IEEE Trans. Microw. Theory Tech., 21 (12) (1973), 753763.Google Scholar
[9] Mailloux, R.J.: Phased Array Antenna Handbook, 2nd ed., Artech House Publishers, Boston, London, 2005.Google Scholar
[10] Kraus, J.D.: Antennas, 2nd ed., McGraw-Hill Publishers, New York, 1988.Google Scholar
[11] Hashimoto, K.; Niijima, S.; Eguchi, M.; Matsumoto, H.: Optimization of uniformly excited phased array for microwave power transmission, in Proc. ISAP 2007, 3B1-2, Niigata, Japan, August 2007.Google Scholar
[12] Yonezawa, R.; Konishi, Y.; Chiba, I.; Katagi, T.: Beam-shape correction in deployable phased array. IEEE Trans. Antennas Propag., 47 (3), (1999), 482486.CrossRefGoogle Scholar