Fourth Hutton Symposium: The Origin of Granites and Related Rocks
Preface
Preface
- W. E. Stephens, B. Barbarin
-
- Published online by Cambridge University Press:
- 03 November 2011, pp. v-vi
-
- Article
- Export citation
Research Article
Fertility of metapelites and metagraywackes during leucogranite generation: an example from the Black Hills, U.S.A.
- Peter I. Nabelek, Cindy D. Bartlett
-
- Published online by Cambridge University Press:
- 03 November 2011, pp. 1-14
-
- Article
- Export citation
-
In order to elucidate how mineralogy and composition of crustal sources influences production of leucogranite magmas, we modelled the potential fertility of a sequence of metapelites and metagraywackes from the Black Hills, South Dakota, U.S.A., using a least-squares mixing approach. Rocks analogous to the Black Hills schists were the sources of the Harney Peak leucogranite. Both muscovite and biotite fluid-absent melting reactions (MM and BM, respectively) were investigated. Using the Harney Peak Granite composition as the melt analogue and mineral compositions from the schists for mixing calculations, it is shown that MM of metapelites would lead to highly variable residue mineralogy in the investigated samples. The average residue includes 36 wt.% biotite, 32 wt.% quartz, 12 wt.% plagioclase, 8 wt.% K-feldspar, 9 wt.% sillimanite and 2 wt.% garnet. Melt production ranges from 5% to 23% with an average of 14%. It is limited by the amount of H2O that must be in the melt at the conditions of melting, relative to the amount that is in muscovite in the source rocks. Plagioclase-rich metagraywackes contain little to no muscovite, thus MM cannot occur in them.
Although BM is continuous over a wide temperature range, for the purposes of modelling melting at 975°C and 10kbar was chosen. The temperature is near the terminal stability of biotite, thus the calculations give near-maximum melt production. At this temperature, the mineralogy of the model residues from both metapelites and metagraywackes is dominated by garnet. The potential melt production in the metapelites ranges from 0% to 58% with an average of 32%. It is limited by the availability of plagioclase in the source rocks. Potential melt production in the metagraywackes ranges from 9% to 37% with an average of 23%. At the chosen conditions of melting, melt production is limited by the available K in biotite, although at lower temperatures, the available H2O limits melt production. The total potential melt production (MM + BM) in the metapelites is higher because they have on average a low normative An/Ab ratio (0·14) that approaches the ratio in the leucogranites (0·04). The paragonite component in muscovite significantly contributes to the low ratio in the metapelites. The higher ration (0·27) in the metagraywackes is denned by the feldspar composition.
Using the calculated melt fractions and residue mineralogies, we modelled the concentrations of Rb, Sr and Ba in the melts, as these elements are important indicators of melt-generating processes. The results indicate that both Sr and Ba are likely to be heterogeneous in extracted melt batches and will be depleted in partial melts relative to their pelitic sources, irrespective of whether the melting is fluid-absent or fluid-present.
Micro structural and mineralogical evidence for limited involvement of magma mixing in the petrogenesis of a Hercynian high-K calc-alkaline intrusion: the Kozárovice granodiorite, Central Bohemian Pluton, Czech Republic
- Vojtěch Janoušek, D. R. Bowes, Colin J. R. Braithwaite, Graeme Rogers
-
- Published online by Cambridge University Press:
- 03 November 2011, pp. 15-26
-
- Article
- Export citation
-
Textural and mineralogical features in the high-K calc-alkaline Kozárovice granodiorite (Hercynian Central Bohemian Pluton, Bohemian Massif) and associated small quartz monzonite masses imply that mixing between acid (granodioritic) and basic (monzonitic/monzogabbroic) magmas was locally petrogenetically significant.
Net veining, with acicular apatite and numerous lath-shaped plagioclase crystals present in the quartz monzonite, and abundant mafic microgranular enclaves (MME) in the granodiorite, indicate that as the monzonitic magma was injected into the granodioritic magma chamber, it rapidly cooled and was partly disintegrated by the melt already present. Evidence from cathodoluminescence suggests that the two magmas exchanged early-formed plagioclase crystals. In the quartz monzonite, granodiorite-derived crystals were overgrown by narrow calcic zones, followed by broad, normally zoned sodic rims. In the granodiorite, plagioclase crystals with calcic cores overgrown by normally zoned sodic rims are interpreted as xenocrysts from the monzonite. After thermal adjustment, crystallisation of the monzonitic magma ceased relatively slowly, forming quartz and K-feldspar oikocrysts.
Although the whole-rock geochemistry of the quartz monzonite and the MME support magma mixing, major- and trace-element based modelling of the host granodiorite has previously indicated an origin dominated by assimilation and fractional crystallisation. Magma mixing therefore seems to represent a local modifying influence rather than the primary petrogenetic process.
Origin of heterogeneous mafic enclaves by two-stage hybridisation in magma conduits (dykes) below and in granitic magma chambers
- W. J. Collins, S. R. Richards, B. E. Healy, P. I. Ellison
-
- Published online by Cambridge University Press:
- 03 November 2011, pp. 27-45
-
- Article
- Export citation
-
Field, petrographic and geochemical evidence from the K-feldspar megacrystic Kameruka pluton, Lachlan Fold Belt, southeastern Australia, suggests that complex, multicomponent, mafic microgranular enclaves (MME) are produced by two-stage hybridisation processes. Stage 1 mixing occurs in composite dykes below the pluton, as mafic and silicic melts ascend through shared conduits. Pillows formed in these conduits are homogeneous, fine-to medium-grained stage 1 MME, which typically range from basaltic to granitic compositions that plot as a sublinear array on Harker diagrams. Stage 2 hybridisation occurs in the magma chamber when the composite dykes mix with the resident magma as synplutonic dykes. The stage 2 hybrids also form linear chemical arrays and range from basaltic to granodioritic compositions, the latter resembling the more mafic phases of the pluton. Stage 2 MME are distinguished from stage 1 types by the presence of K-feldspar xenocrysts and a more heterogeneous nature: they commonly contain stage 1 enclaves. Subsequent disaggregation and dispersal of stage 2 hybrid synplutonic dykes within the magma chamber produces a diverse array of multi-component MME.
Field evidence for conduit mixing is consistent with published analogue experimental studies, which show that hybrid thermo-mechanical boundary layers (TMBL) develop between mafic and silicic liquids in conduits. A mechanical mixing model is developed, suggesting that the TMBL expands and interacts with the adjacent contrasting melts during flow, producing an increasing compositional range of hybrids with time that are mafic in the axial zone, grading to felsic in the peripheral zones in the conduit. Declining flow rates in the dyke and cooling of the TMBL zones produce a pillowing sequence progressing from mafic to felsic, which explains the general observation of more MME in more silicic hosts.
The property of granitic magmas to undergo transient brittle failure in seismic regimes allows analogies with fractured solids to be drawn. The fracture network in granitic magmas consists of through-going ‘backbone’ mafic and silicic ± composite dykes, and smaller ‘dangling’ granitic dykes locally generated in the magma chamber. Stage 1 hybrids form in composite backbone dykes and stage 2 hybrids form where they intersect dangling dykes in the magma chamber. With subsequent shear stress recovery, the host magma chamber reverts to a visco-plastic material capable of flow, resulting in disaggregation and dispersal of these complex, hybrid synplutonic dykes, and a vast array of double and multicomponent enclaves potentially develop in the pluton.
Thermal evolution of silicic magma chambers after basalt replenishments
- Takehiro Koyaguchi, Katsuya Kaneko
-
- Published online by Cambridge University Press:
- 03 November 2011, pp. 47-60
-
- Article
- Export citation
-
In order to understand the governing factors of petrological features of erupted magmas of island-arc or continental volcanoes, thermal fluctuations of subvolcanic silicic magma chambers caused by intermittent basalt replenishments are investigated from the theoretical viewpoint. When basaltic magmas are repeatedly emplaced into continental crust, a long-lived silicic magma chamber may form. A silicic magma chamber within surrounding crust is composed of crystal-melt mixtures with variable melt fractions. We define the region which behaves as a liquid in a mechanical sense (‘liquid part’) and the region which is in the critical state between liquid and solid states (‘mush’) collectively as a magma chamber in this study. Such a magma chamber is surrounded by partially molten solid with lower melt fractions. Erupted magmas are considered to be derived from the liquid part. The size of a silicic magma chamber is determined by the long-term balance between heat supply from basalt and heat loss by conduction, while the temperature and the volume of the liquid part fluctuate in response to individual basalt inputs. Thermal evolution of a silicic magma chamber after each basalt input is divided into two stages. In the first stage, the liquid part rapidly propagates within the magma chamber by melting the silicic mush, and its temperature rises above and decays back to the effective fusion temperature of the crystal-melt mixture on a short timescale. In some cases the liquid part no longer exists. In the second stage, the liquid part ceases to propagate and cools slowly by heat conduction on a much longer timescale. The petrological features of the liquid part, such as the amount of unmelted preexisting crystals, depend on the intensity of individual pulses of the basalt heat source and the degree of fractionation during the first stage, as well as the bulk composition of the silicic magma.
Phase equilibrium constraints on the viscosity of silicic magmas II: implications for mafic–silicic mixing processes
- Bruno Scaillet, Alan Whittington, Caroline Martel, Michel Pichavant, François Holtz
-
- Published online by Cambridge University Press:
- 03 November 2011, pp. 61-72
-
- Article
- Export citation
-
Isobaric crystallisation paths obtained from phase equilibrium experiments show that, whereas in rhyolitic compositions melt fraction trends are distinctly eutectic, dacitic and more mafic compositions have their crystallinities linearly correlated with temperatures. As a consequence, the viscosities of the latter continuously increase on cooling, whereas for the former they remain constant or even decrease during 80% of the crystallisation interval, which opens new perspectives for the fluid dynamical modelling of felsic magma chambers. Given the typical dyke widths observed for basaltic magmas, results of analogue modelling predict that injection of mafic magmas into crystallising intermediate to silicic plutons under pre-eruption conditions cannot yield homogeneous composition. Homogenisation can occur, however, if injection takes place in the early stages of magmatic evolution (i.e. at near liquidus conditions) but only in magmas of dacitic or more mafic composition. More generally, the potential for efficient mixing between silicic and mafic magmas sharing large interfaces at upper crustal levels is greater for dry basalts than for wet ones. At the other extreme, small mafic enclaves found in many granitoids behave essentially as rigid objects during a substantial part of the crystallisation interval of the host magmas, which implies that finite strain analyses carried out on such markers can give only a minimum estimate of the total amount of strain experienced by the host pluton. Mafic enclaves carried by granitic magmas behave as passive markers only at near solidus conditions, typically when the host granitic magma shows near-solid behaviour. Thus they cannot be used as fossil indicators of direction of magmatic flow.
Grain-scale and outcrop-scale distribution and movement of melt in a crystallising granite
- E. W. Sawyer
-
- Published online by Cambridge University Press:
- 03 November 2011, pp. 73-85
-
- Article
- Export citation
-
The distribution of melt has been mapped in a granite pluton deformed whilst it contained melt. At the outcrop scale, leucomonzogranite melt was segregated from hornblende monzogranite when the rigid crystal framework was tectonically compacted. The melt collected in well-defined, structurally controlled sites that formed during dextral, non-coaxial, strike-slip shearing. The segregations are generally isolated, but locally they link to form extensive branched arrays which drained larger volumes of granite in a two-step process. First, melt drained from the compacting matrix through the array and pooled along dilatant foliation planes; later, the melt moved farther away when a single planar melt-transfer channel formed.
Thin section maps show that most melt was distributed in the foliation plane and along the lineation in the crystallising matrix. The location of melt at the grain scale is primarily controlled by the feldspar-dominated shape fabric of the crystal framework, and not by tectonic stresses as at the outcrop scale. Tectonic stresses account for the relatively small proportion of melt films located in grain boundaries normal to the lineation. The distribution of melt-bearing grain boundaries outlines larger domains in the thin sections that form a linked three-dimensional network through which melt moved within the crystallising framework.
Dyke widths and ascent rates of silicic magmas on Venus
- Nick Petford
-
- Published online by Cambridge University Press:
- 03 November 2011, pp. 87-95
-
- Article
- Export citation
-
The ascent of silicic magmas in dykes and diapirs on Venus is investigated using magma transport models for granitic melts on Earth. For fixed planetary thermal and melt properties, differences in critical minimum dyke widths, and hence magma ascent rates, are controlled by gravitational strength alone. For density contrasts of 200–600 kg/m3 and a solidus temperature of 1023 K, minimum critical dyke widths (wc) on Venus range from c. < 1–1200 m for a transport distance of 20 km. Dyke widths are especially sensitive to small changes in the far-field lithospheric temperature at values close to a critical Stefan number (S∝crit) of 0·83 where dyke magma temperatures are equal to the mean surface temperature. Typical magma ascent rates range from 0·02m/s (ηm = 105 Pa s) to 10−9 m/s (ηm = 1017 Pa s) giving transport times of between 12 days and c. 105 years. Dyke ascent velocities for highly viscous melts are compared with diapiric rise of a hot Stokes body of radius comparable with the pancake dome average (c. 12 km), and require dyke widths of the order of 100 times the average width of low viscosity flows to prevent freezing. In both cases, magma flow is characterised by Péclet numbers between 1 and 4, although even at high viscosities (> 1014 Pa s), dyke ascent is still 100 to 1000 times faster than diapiric rise. At a melt viscosity of 1017 Pa s, critical dyke widths are between c. 1% and 5% the diameter of an average width pancake dome on Venus, indicating that even for extreme melt viscosities, domes can easily be fed by dykes. Given the abundance of dome structures and associated surface features related to hyperbasal magmatism, batholithic volumes of silicic rocks may be present on Venus. Intermediate to high silica melts formed by partial melting of the Venusian crust should be compositionally more akin to Na-rich terrestrial adakites and trondhjemites than calc-alkaline dacites or rhyolites.
Analogue and numerical modelling of shape fabrics: application to strain and flow determination in magmas
- Laurent Arbaret, Angel Fernandez, Josef Ježek, Benoît Ildefonse, Patrick Launeau, Hervé Diot
-
- Published online by Cambridge University Press:
- 07 October 2019, pp. 97-109
-
- Article
- Export citation
-
ABSTRACT:
We summarise numerical and analogue models of shape fabrics, and discuss their applicability to the shape preferred orientation of crystals in magmas. Analyses of flow direction and finite strain recorded during the emplacement of partially crystallised magmas often employ the analytical and numerical solutions of the Jeffery's model, which describe the movement of noninteracting ellipsoidal particles immersed in a Newtonian fluid. Crystallising magmas, however, are considered as dynamic fluid systems in which particles nucleate and grow. Crystallisation during magma deformation leads to mechanical interactions between crystals whose shape distribution is not necessarily homogeneous and constant during emplacement deformation. Experiments carried out in both monoparticle and multiparticle systems show that shape fabrics begin to develop early in the deformation history and evolve according to the theoretical models for low-strain regimes. At large strains and increasing crystal content, the heterogeneous size distribution of natural crystals and contact interactions tend to generate steady-state fabrics with a lineation closely parallel to the direction of the magmatic flow. This effect has been observed in all threedimensional experiments with particles of similar size and for strain regimes of high vorticity. On the other hand, studies of feldspar megacryst sub-fabrics in porphyritic granites suggest that these record a significant part of the strain history. Thus, the fabric ellipsoid for megacrysts evolves closer to the strain ellipsoid than for smaller markers. This behaviour results from the fact that the matrix forms of the melt and smaller crystals behave like a continuous medium relative to the megacrysts. Consequently, in the absence of these markers, and because the fabric intensities of smaller particles such as biotite are stable and lower than predicted by the theory, finite strain remains indeterminate. In that case, strain quantification and geometry of the flow requires the addition of external constraints based on other structural approaches.
Analogue scale models of pluton emplacement during transpression in brittle and ductile crust
- Keith Benn, Francis Odonne, Sharon K. Y. Lee, Ken Darcovich
-
- Published online by Cambridge University Press:
- 07 October 2019, pp. 111-121
-
- Article
- Export citation
-
ABSTRACT:
Analogue experiments were used to investigate pluton emplacement during transpression in a layered crust. Models consisted of (1) a silicone gum-PbO suspension as analogue magma, (2) a silicone gum-Pb suspension as a basal ductile layer, and (3) an overlying sand pack representing brittle crust. The models were transpressed at 3 mm/hr causing the extrusion of the analogue magma from a progressively closing slot, and its emplacement into the ductile layer. The thicknesses of the layers were critical in controlling the shapes of intrusions and the structures that developed in the brittle overburden. Thicker sand packs led to flattened, symmetrical laccolith-shaped intrusions and the nucleation of one oblique thrust in the sand pack above the extremity of the intrusion. Thinner sand packs led to thicker, asymmetrical laccolith-like intrusions with uplift of the overburden on an oblique thrust, and the formation of a shallow graben in the extrados of a bending fold. Reducing the thickness of the basal ductile layer resulted in a larger number of shear zones in the sand pack, and structural geometries approaching those produced in experiments involving only a brittle analogue crust and no ductile layer. Shear zones in the sand pack were localised by intrusions, and also played a key role in displacing analogue brittle crust to make space for intrusions. The results suggest that tectonic forces may play an important role in displacing blocks of crust during pluton emplacement in transpressional belts. They also suggest that pluton shapes, and the geometries and kinematics of emplacement-related shear zones and faults, may depend on the depth of emplacement. In nature, depending on the structural level exposed in the map plane, faults and shear zones that helped make space for emplacement may not appear to be spatially associated with the pluton.
Composite-laccolith emplacement of the post-tectonic Vila Pouca de Aguiar granite pluton (northern Portugal): a combined AMS and gravity study
- H. Sant'Ovaia, J. L. Bouchez, F. Noronha, D. Leblanc, J. L. Vigneresse
-
- Published online by Cambridge University Press:
- 03 November 2011, pp. 123-137
-
- Article
- Export citation
-
The Vila Pouca de Aguiar granite pluton, emplaced during the latest event of the Variscan orogeny of northern Portugal, is here subjected to a detailed study that combines magnetic fabric measurements and gravity modelling of its shape at depth. This laccolith, less than 1 km in thickness over ≈60% of its outcrop area, appears to be fed from its northern area, through narrow conduits, up to 5 km deep, belonging to a set of Y-shaped valleys that almost perfectly correspond to the local Régua–Verin fault-system identified in the geological maps. A normal petrographical zonation, already identified geologically, appears to be rather progressive, although a gradient in magnetic suceptibility magnitude in-between the two main magma types is evidenced. It is suggested that the first to be emplaced and the least evolved granite type (Vila Pouca de Aguiar Granite) upwelled from the local, NE-trending fault-zone, acting as a dyke, and formed a thin sill where NE-directed magma flow was dominant, at least close to the floor. The more evolved granite type (Pedras Salgadas Granite), located just above the main feeder zone, and deeply rooted at the intersection beween underlying faults, is at the centre of a remarkably regular concentric distribution of the foliation trajectories. They may reflect the late doming of the laccolith's northern part, coeval with a slight E-W extension of the inflating magma reservoir, as marked by the E-W-trending lineations. Along with ubiquitous magmatic to near-magmatic microstructures and particularly low anisotropy magnitudes, such patterns can be entirely explained by magma movement within its inflating reservoir. This composite laccolith, during emplacement of which no interference with the regional strain pattern can be recorded, is therefore considered as typical of post-tectonic emplacement.
Crystallisation of fine- and coarse-grained A-type granite sheets of the Southern Oklahoma Aulacogen, U.S.A.
- John P. Hogan, M. Charles Gilbert, Jon D. Price
-
- Published online by Cambridge University Press:
- 03 November 2011, pp. 139-150
-
- Article
- Export citation
-
A-type felsic magmatism associated with the Cambrian Southern Oklahoma Aulacogen began with eruption of voluminous rhyolite to form a thick volcanic carapace on top of an eroded layered mafic complex. This angular unconformity became a crustal magma trap and was the locus for emplacement of later subvolcanic plutons. Rising felsic magma batches ponding along this crustal magma trap crystallised first as fine-grained granite sheets and then subsequently as coarser-grained granite sheets. Aplite dykes, pegmatite dykes and porphyries are common within the younger coarser-grained granite sheets but rare to absent within the older fine-grained granite sheets. The older fine-grained granite sheets typically contain abundant granophyre.
The differences between fine-grained and coarse-grained granite sheets can largely be attributed to a progressive increase in the depth of the crustal magma trap as the aulacogen evolved. At low pressures (<200MPa) a small increase in the depth of emplacement results in a dramatic increase in the solubility of H2O in felsic magmas. This is a direct consequence of the shape of the H2O-saturated granite solidus. The effect of this slight increase in total pressure on the crystallisation of felsic magmas is to delay vapour saturation, increase the H2O content of the residual melt fractions and further depress the solidus temperature. Higher melt H2O contents, and an extended temperature range over which crystallisation can proceed, both favour crystallisation of coarser-grained granites. In addition, the potential for the development of late, H2O-rich, melt fractions is significantly enhanced. Upon reaching vapour saturation, these late melt fractions are likely to form porphyries, aplite dykes and pegmatite dykes.
For the Southern Oklahoma Aulacogen, the progressive increase in the depth of the crustal magma trap at the base of the volcanic pile appears to reflect thickening of the volcanic pile during rifting, but may also reflect emplacement of earlier granite sheets. Thus, the change in textural characteristics of granite sheets of the Wichita Granite Group may hold considerable promise as an avenue for further investigation in interpreting the history of this rifting event.
Age and origin of coeval TTG, I- and S-type granites in the Famatinian belt of NW Argentina
- R. J. Pankhurst, C. W. Rapela, C. M. Fanning
-
- Published online by Cambridge University Press:
- 03 November 2011, pp. 151-168
-
- Article
- Export citation
-
Three granitoid types are recognised in the Famatinian magmatic belt of NW Argentina, based on lithology and new geochemical data: (a) a minor trondhjemite–tonalite–granodiorite (TTG) group, (b) a metaluminous I-type gabbro-monzogranite suite, and (c) S-type granites. The latter occur as small cordieritic intrusions associated with 1-type granodiorites and as abundant cordierite-bearing facies in large batholithic masses. Twelve new SHRIMP U-Pb zircon ages establish the contemporaneity of all three types in Early Ordovician times (mainly 470-490 Ma ago). Sr- and Nd-isotopic data suggest that, apart from some TTG plutons of asthenospheric origin, the remaining magmas were derived from a Proterozoic crust-lithospheric mantle section. Trace element modelling suggests that the TTG originated by variable melting of a depleted gabbroid source at 10-12kbar, and the I-type tonalite-granodiorite suite by melting of a more enriched lithospheric source at c. 5 kbar. The voluminous intermediate and acidic I-types involved hybridisation with lower and middle crustal melts. The highly peraluminous S-type granites have isotopic and inherited zircon patterns similar to those of Cambrian supracrustal metasedimentary rocks deposited in the Pampean cycle, and were derived from them by local anatexis. Other major components of the S-type batholiths involved melting of deep crust and mixing with the I-type magmas, leading to an isotopic and geochemical continuum.
The Miocene plutonic event of the Patagonian Batholith at 44° 30′ S: thermochronological and geobarometric evidence for melting of a rapidly exhumed lower crust
- M. A. Parada, A. Lahsen, C. Palacios
-
- Published online by Cambridge University Press:
- 03 November 2011, pp. 169-179
-
- Article
- Export citation
-
The Patagonian Batholith was formed by numerous plutonic events that took place between the Jurassic and the Miocene. North of 47° S, the youngest plutons occupy the axial zone adjacent to the Liquiñe-Ofqui Fault Zone, which is a major intra-arc strike-slip fault system active since the Miocene. The Queulat Complex, located at 44° 30′ S, includes two Miocene plutonic units: the Early Miocene Queulat diorite (QD) and the Late Miocene Puerto Cisnes granite (PCG). The QD includes hornblende + clinopyroxene diorites and tonalites, whereas the PCG includes slightly peraluminous garnet ± sillimanite granites and granodiorites.
Eleven mineral Ar–Ar ages and three apatite fission track ages were obtained from the Queulat Complex and surrounding host rocks. Hornblende and biotite Ar–Ar ages of c. 16-18 Ma and 9-10 Ma, respectively, were obtained for the QD. The youngest ages of the QD are similar to the age of emplacement of the PCG as previously determined. Ar–Ar ages for muscovites and biotites of 6·6 ± 0·3 Ma and 5·6 ± 0·1 Ma, respectively, were obtained for the PCG. Biotites and muscovites from mylonites and pelitic hornfelses adjacent to the PCG yielded Ar—Ar ages between 5·1 Ma and 5·5 Ma. The apatite fission track ages of the QD and PCG overlap within the error margin (2•2 ± 1·1-3·3 ± 1·4 Ma).
The Al-in-hornblende geobarometer yielded pressures for the QD emplacement equivalent to depths in the 19-24 km range, which is substantially higher than the 10 km depth estimated previously for the PCG emplacement. Exhumation rates (v) up to 2·0mm/yr were calculated for the time elapsed between the QD and PCG emplacements. A v value of 1·0mm/yr was calculated for the PCG subsequent to its emplacement. Using the silica—Ca-tschermak-anorthite geobarometer, we estimate the QD magma generation to be at c. 33 km, which is similar to the current crustal thickness. Melting of mafic and metapelitic lower crust was possible at > 30km depth during a period when v was between 1·0mm/yr and 2·0mm/yr.
Granitoids of the Central Asian Orogenic Belt and continental growth in the Phanerozoic
- Bor-ming Jahn, Fuyuan Wu, Bin Chen
-
- Published online by Cambridge University Press:
- 03 November 2011, pp. 181-193
-
- Article
- Export citation
-
The Central Asian Orogenic Belt (CAOB), also known as the Altaid Tectonic Collage, is characterised by a vast distribution of Paleozoic and Mesozoic granitic intrusions. The granitoids have a wide range of compositions and roughly show a temporal evolution from calcalkaline to alkaline to peralkaline series. The emplacement times for most granitic plutons fall between 500 Ma and 100 Ma, but only a small proportion of plutons have been precisely dated. The Nd-Sr isotopic compositions of these granitoids suggest their juvenile characteristics, hence implying a massive addition of new continental crust in the Phanerozoic. In this paper we document the available isotopic data to support this conclusion.
Most Phanerozoic granitoids of Central Asia are characterised by low initial Sr isotopic ratios, positive εNd(T) values and young Sm—Nd model ages (TDM) of 300-1200 Ma. This is in strong contrast with the coeval granitoids emplaced in the European Caledonides and Hercynides. The isotope data indicate their ‘juvenile’ character and suggest their derivation from source rocks or magmas separated shortly before from the upper mantle. Granitoids with negative εNd(T) values also exist, but they occur in the environs of Precambrian microcontinental blocks and their isotope compositions may reflect contamination by the older crust in the magma generation processes.
The evolution of the CAOB is probably related to accretion of young arc complexes and old terranes (microcontinents). However, the emplacement of large volumes of post-tectonic granites requires another mechanism, probably through a series of processes including underplating of massive basaltic magma, intercalation of basaltic magma with lower crustal granulites, partial melting of the mixed lithologic assemblages leading to generation of granitic liquids, followed by extensive fractional crystallisation. The proportions of the juvenile or mantle component for most granitoids of Central Asia are estimated to vary from 70% to 100%.
Cretaceous fractionated I-type granitoids and metaluminous A-type granites in SE China: the Late Yanshanian post-orogenic magmatism
- Cheng-Hong Chen, Wayne Lin, Hsueh-Yu Lu, Chi-Yu Lee, Jung-Li Tien, Yi-Hsin Lai
-
- Published online by Cambridge University Press:
- 03 November 2011, pp. 195-205
-
- Article
- Export citation
-
The Late Yanshanian Orogeny (130-90 Ma) encompasses an important Mesozoic magmatic event in the crustal evolution of SE China. Products of post-orogenic magmatism, widely distributed in the eastern part of Zhejiang and Fujian provinces known as the Southeast Coast Magmatic Belt (SCMB), are dominated by large amounts of slightly Nb and Ta depleted, high-K calc-alkaline granites (I-type) and small amounts of strongly Ba, Sr, Eu, Ti and P depleted, metaluminous granites (A-type). 40Ar/39Ar dating from amphiboles suggests that emplacement of A-type granites mostly postdates (94-90 Ma) the intrusion of voluminous I-type granitoids (110-99 Ma). Using the Al-in-amphibole geobarometer, I-type suites were estimated to have been emplaced at shallow depths (5-7 km). Along with the fact that A-type granites are phyric or miarolitic in texture, it can be concluded that all these post-orogenic suites in the SCMB belong to shallow intrusives. They have also undergone a rapid cooling (higher than 100°C/Ma at T > 300 °C) as indicated by the thermochronology of hornblende, biotite and K-feldspar; therefore, generation of A-type granites from I-type magmas through fractional crystallisation would be a difficult process. Alternatively, their geochemical characteristics are attributed to partial melting in the residual lower crust under an elevated geothermal environment. On the other hand, I-type magmas are considered to be middle-crust-derived melts largely modified with mantle-derived melts that had been depleted with Nb and Ta by earlier tectonic processes. Such a tectonic environment is explained by the underplating of basaltic magmas, most probably due to lithospheric delamination taking place at c. 110 Ma, which marks the beginning of the postorogenic episode in this area. Numerical modelling for a heat source provided by the underplating of basaltic magma supports such a proposition.
A sustained felsic magmatic system: the Hercynian granitic batholith of the Spanish Central System
- Carlos Villaseca, Víctor Herreros
-
- Published online by Cambridge University Press:
- 03 November 2011, pp. 207-219
-
- Article
- Export citation
-
A batholith of around 10,000 km2 was formed during the Hercynian orogeny in the Spanish Central System (SCS). Geochronological data indicate concentrated magmatic activity during the period 325-284 Ma. This late-orogenic magmatism is essentially granitic with only minor associated basic rocks (< 2% in outcrop). The SCS is a remarkably homogeneous batholith showing a restricted range of geochemical granite types without any evolutionary pattern related to time. These peraluminous granites show a limited variation in Na2O/K2O) (0·60-0·95), K/Rb (140-240), (La/Yb)n (6-13), and Eu/Eu* (0·34-0·62) ratios. This constancy in chemical characteristics is also reflected in their isotopic signatures: most monzogranites have initial 87Sr/86Sr ratios in the range of 0·7073-0·71229, initial εNd values vary between —5·4 and —6·6 and δ 18O values group in the restricted range of 8·9-9·6‰. The lack of significant differences among SCS granitoids, maintained during a long geological period, suggests constancy in the nature of their source regions and conditions of magma generation. (1) Limited range of crustal sources: an essentially magmatic recycling during Hercynian orogen is suggested. Mantle-derived components are very limited and restricted to a minor role in the origin of the batholith. Geochemical and isotopic features of SCS granitoids are compatible with felsic lower crustal sources. (2) Constraints in melt conditions: uniformity in residual mineral assemblages (feldspars and garnet are always present in the granulitic residua) combined with a lack of attainment of equilibrium conditions during accessory phase dissolution in the crustal melting process is suggested. Granitic melts never reach saturation in some trace elements (REE, Th, Y, Zr), restricting their chemical variability. (3) Homogenisation in magma chambers: long-lived magmatic systems whose successive pulses accumulate into large magma chambers have the opportunity to mingle, thus reducing source differences.
Bimodal magmatism as a consequence of the post-collisional readjustment of the thickened Variscan continental lithosphere (Aiguilles Rouges-Mont Blanc Massifs, Western Alps)
- François Bussy, Jean Hernandez, Jürgen Von Raumer
-
- Published online by Cambridge University Press:
- 03 November 2011, pp. 221-233
-
- Article
- Export citation
-
High Precision U-Pb zircon and monazite dating in the Aiguilles Rouges–Mont Blanc area allowed discrimination of three short-lived bimodal magmatic pulses: the early 332 Ma Mg–K Pormenaz monzonite and associated 331 Ma peraluminous Montées Pélissier monzogranite; the 307 Ma cordierite-bearing peraluminous Vallorcine and Fully intrusions; and the 303 Fe-K Mont Blanc syenogranite. All intruded syntectonically along major-scale transcurrent faults at a time when the substratum was experiencing tectonic exhumation, active erosion recorded in detrital basins and isothermal decompression melting dated at 327-320 Ma. Mantle activity and magma mixing are evidenced in all plutons by coeval mafic enclaves, stocks and synplutonic dykes. Both crustal and mantle sources evolve through time, pointing to an increasingly warm continental crust and juvenile asthenospheric mantle sources. This overall tectono-magmatic evolution is interpreted in a scenario of post-collisional restoration to normal size of a thickened continental lithosphere. The latter re-equilibrates through delamination and/or erosion of its mantle root and tectonic exhumation/erosion in an overall extensional regime. Extension is related to either gravitational collapse or back-arc extension of a distant subduction zone.
U—Pb single zircon data of granitoids from the High Tatra Mountains (Slovakia): implications for the geodynamic evolution
- Ulrike Poller, Wolfgang Todt
-
- Published online by Cambridge University Press:
- 03 November 2011, pp. 235-243
-
- Article
- Export citation
-
New U/Pb results by cathodoluminescence-controlled single zircon dating of rocks from the High Tatra Mountains (Slovakia) constrain ages for the protolith at 2Ga for the granitoids and 3 Ga for the Koncistá migmatite. Concordant single zircon ages date the intrusion of the migmatite precursor at 3567 Ma and the migmatisation at 332 ± 5 Ma. The intrusion of this precursor corresponds with the major granite intrusion in the Western Tatra Mountains. The geodynamic scenario at this time is described as slab detachment of subducted oceanic crust at the active continental margin of Gondwana. The resulting upwelling of asthenospheric mantle brought enough heat for the anatexis of old metasediments and the production of new H- to S-type granites. High Tatra diorites have an intrusion age of 341 ± 5 Ma, constrained by a concordant single zircon age. This age marks the beginning of the Variscan collision of the two convergent continents Laurasia and Gondwana. The intrusion of granites in the High Tatra was confirmed by concordant data at 314 ± 4 Ma, documenting the final stage of the Variscan continent collision.
Granite genesis related to geodynamics from Hf—Y in zircon
- Jean-Pierre Pupin
-
- Published online by Cambridge University Press:
- 03 November 2011, pp. 245-256
-
- Article
- Export citation
-
Zircon is a very interesting accessory mineral, a kind of ‘crustal diamond’, easily recycled and recording through large morphological variability the main rock-forming events. Since 1985, a systematic study of chemical variability of zircon in magmatic rocks has led to the definition of three main generations in zircon populations: inherited phase 1, magmatic phase 2 and late magmatic phase 3. Hafnium and yttrium appear to be the most useful for source characterisation, especially if using phase 2 data. As a consequence, a new diagram of HfO2 versus Y2O3 is proposed, divided into domains la to 6b to describe the distribution of the genetic groups and the specific domains for anorogenic and orogenic rocks. Zircon in anorogenic granitoids: tholeiitic plagiogranites (high Y, low Hf), hypersolvus (medium to low Y, low Hf) and subsolvus (medium to high Y and Hf) alkaline granites/rhyolites, has separate mean distributions. Genetic relations existing between rocks with obvious textural differences (granites, microgranites, rhyolites) are also recognised. Zircon in orogenic granitoids is Y-poor and shows a very limited distribution, but the minimal average values in magmatic zircon vary from 11 000 wt ppm HfO2 in the calc-alkaline suite, to 12 000 ppm in the peraluminous porphyritic granites and to 13 500 ppm in entirely crustal anatectic granites and migmatites. Mixing-mingling processes are proposed to explain the intermediate characteristics of zircons and rocks in the peraluminous porphyritic and K-subalkaline granites. This is consistent with the time emplacement and space distribution of these two orogenic members, but leads to a new proposal of emplacement of some alkaline subsolvus magmas during orogenic cycles.