References
[1]Hodes, G., “When small is different: some recent advances in concepts and applications of nanoscale phenomena,” Adv. Mater., vol. 19, no. 5, pp. 639–655, 2007.
[2]Liveri, V. T., Controlled synthesis of nanoparticles in microheterogeneous systems. Springer Science & Business Media, 2006.
[3]Guozhong, C., Nanostructures and nanomaterials: synthesis, properties and applications. World Scientific, 2004.
[4]Xia, Y., et al., “One‐dimensional nanostructures: synthesis, characterization, and applications,” Adv. Mater., vol. 15, no. 5, pp. 353–389, 2003.
[5]Lieber, C. M., “One-dimensional nanostructures: chemistry, physics & applications,” Solid State Commun., vol. 107, no. 11, pp. 607–616, 1998.
[6]Yang, P., “The chemistry and physics of semiconductor nanowires,” MRS Bull., vol. 30, no. 2, pp. 85–91, 2005.
[7]Hayden, O., Agarwal, R., and Lu, W., “Semiconductor nanowire devices,” Nano Today, vol. 3, no. 5–6, pp. 12–22, 2008.
[8]Li, Y., Qian, F., Xiang, J., and Lieber, C. M., “Nanowire electronic and optoelectronic devices,” Mater. Today., vol. 9, no. 10, pp. 18–27, 2006.
[9]Patolsky, F., Zheng, G., and Lieber, C. M., “Nanowire-based biosensors,” ed: ACS Publications, Anal. Chem, Vol. 78, no. 13, pp. 4260–4269, 2006.
[10]Chen, X., Wong, C. K., Yuan, C. A., and Zhang, G., “Nanowire-based gas sensors,” Sens. Actuator B-Chem., vol. 177, pp. 178–195, 2013.
[11]Qi, Y. and McAlpine, M. C., “Nanotechnology-enabled flexible and biocompatible energy harvesting,” Energ. Environ. Sci., vol. 3, no. 9, pp. 1275–1285, 2010.
[12]Fan, F.-R., Tian, Z.-Q., and Wang, Z. L., “Flexible triboelectric generator,” Nano Energy, vol. 1, no. 2, pp. 328–334, 2012.
[13]Garnett, E. C., Brongersma, M. L., Cui, Y., and McGehee, M. D., “Nanowire solar cells,” Ann. Rev. Mater. Res., vol. 41, pp. 269–295, 2011.
[14]Chan, C. K., Zhang, X. F., and Cui, Y., “High capacity Li ion battery anodes using Ge nanowires,” Nano Lett., vol. 8, no. 1, pp. 307–309, 2008.
[15]Saito, R., Dresselhaus, G., and Dresselhaus, M. S., Physical properties of carbon nanotubes. World Scientific, 1998.
[16]Shulaker, M. M., et al., “Carbon nanotube computer,” Nature, vol. 501, no. 7468, p. 526, 2013.
[17]Rao, C. and Govindaraj, A., “Synthesis of inorganic nanotubes,” Adv. Mater., vol. 21, no. 42, pp. 4208–4233, 2009.
[18]Goldberger, J., Fan, R., and Yang, P., “Inorganic nanotubes: a novel platform for nanofluidics,” Accounts Chem. Res., vol. 39, no. 4, pp. 239–248, 2006.
[19]Lauhon, L. J., Gudiksen, M. S., Wang, D., and Lieber, C. M., “Epitaxial core–shell and core–multishell nanowire heterostructures,” Nature, vol. 420, no. 6911, pp. 57–61, 2002.
[20]Takei, K., et al., “Nanowire active-matrix circuitry for low-voltage macroscale artificial skin,” Nat. Mater., vol. 9, no. 10, pp. 821–826, 2010.
[21]Paladugu, M., et al., “Novel growth phenomena observed in axial InAs/GaAs nanowire heterostructures,” Small, vol. 3, no. 11, pp. 1873–1877, 2007.
[22]Dasgupta, N. P., et al., “25th anniversary article: semiconductor nanowires–synthesis, characterization, and applications,” Adv. Mater., vol. 26, no. 14, pp. 2137–2184, 2014.
[23]Sun, Y. and Rogers, J. A., “Inorganic semiconductors for flexible electronics,” Adv. Mater., vol. 19, no. 15, pp. 1897–1916, 2007.
[24]Lieber, C. M. and Wang, Z. L., “Functional nanowires,” MRS Bull., vol. 32, no. 2, pp. 99–108, 2007.
[25]Liu, Z., Xu, J., Chen, D., and Shen, G., “Flexible electronics based on inorganic nanowires,” Chem. Soc. Rev., vol. 44, no. 1, pp. 161–192, 2015.
[26]Sun, Y. and Rogers, J. A., Semiconductor nanomaterials for flexible technologies: From photovoltaics and electronics to sensors and energy storage. William Andrew, 2010.
[27]Alenezi, M. R., Henley, S. J., Emerson, N. G., and Silva, S. R. P., “From 1D and 2D ZnO nanostructures to 3D hierarchical structures with enhanced gas sensing properties,” Nanoscale, vol. 6, no. 1, pp. 235–247, 2014.
[28]Boskovic, B. O., Stolojan, V., Khan, R. U., Haq, S., and Silva, S. R. P., “Large-area synthesis of carbon nanofibres at room temperature,” Nat. Mater., vol. 1, no. 3, pp. 165–168, 2002.
[29]Garcia Nunez, C., Navaraj, W. T., Liu, F., Shakthivel, D., and Dahiya, R., “Large-area self-assembly of silica microspheres/nanospheres by temperature-assisted dip-coating,” ACS Appl. Mater. Inter, vol. 10, no. 3, pp. 3058–3068, 2018.
[30]Nunez, F. L. C. G., Navaraj, W. T., Christou, A.,Shakthivel, D., and Dahiya, R., “Heterogeneous integration of contact-printed semiconductor nanowires for high performance devices on large areas,” Microsyst Nanoeng, 2018.
[31]Núñez, F. L. C. G., Xu, S. and Dahiya, R., “Large-area electronics based on micro/nanostructures and the manufacturing technologies,” Cambridge Elements (2018), In press.
[32]Núñez, C. G., Liu, F., Navaraj, W. T., Christou, A., Shakthivel, D., and Dahiya, R., “Heterogeneous integration of contact-printed semiconductor nanowires for high-performance devices on large areas,” Microsyst Nanoeng, vol. 4, no. 1, p. 22, 2018.
[33]Nunez, C. G., Taube, W., Liu, F., and Dahiya, R., “ZnO nanowires based flexible UV photodetectors for wearable dosimetry,” in SENSORS, 2017 IEEE, 2017, pp. 1–3: IEEE.
[34]Striakhilev, D., Nathan, A., Vygranenko, Y., Servati, P., Lee, C.-H., and Sazonov, A., “Amorphous silicon display backplanes on plastic substrates,” J. Disp. Technol., vol. 2, no. 4, pp. 364–371, 2006.
[35]Nathan, A., et al., “Flexible electronics: the next ubiquitous platform,” Proc. IEEE., vol. 100, no. Special Centennial Issue, pp. 1486–1517, 2012.
[36]Petti, L., et al., “Metal oxide semiconductor thin-film transistors for flexible electronics,” Appl. Phys. Rev., vol. 3, no. 2, p. 021303, 2016.
[37]Sporea, R., Trainor, M., Young, N., Shannon, J., and Silva, S., “Source-gated transistors for order-of-magnitude performance improvements in thin-film digital circuits,” Sci. Rep., vol. 4, 2014.
[38]Kim, S. J., Choi, K., Lee, B., Kim, Y., and Hong, B. H., “Materials for flexible, stretchable electronics: graphene and 2D materials,” Ann. Rev. Mater. Res., vol. 45, pp. 63–84, 2015.
[39]Akinwande, D., Petrone, N., and Hone, J., “Two-dimensional flexible nanoelectronics,” Nat. Commun., vol. 5, p. 5678, 2014.
[40]García Núñez, C., Navaraj, W. T., Polat, E. O., and Dahiya, R., “Energy autonomous flexible and transparent tactile skin,” Adv. Funct. Mater, vol. 27, no. 18, 2017.
[41]Polat, E. O., Balci, O., Kakenov, N., Uzlu, H. B., Kocabas, C., and Dahiya, R., “Synthesis of large area graphene for high performance in flexible optoelectronic devices,” Sci. Rep., vol. 5, p. 16744, 2015.
[42]Wang, C., et al., “Extremely bendable, high-performance integrated circuits using semiconducting carbon nanotube networks for digital, analog, and radio-frequency applications,” Nano Lett., vol. 12, no. 3, pp. 1527–1533, 2012.
[43]Lau, P. H., et al., “Fully printed, high performance carbon nanotube thin-film transistors on flexible substrates,” Nano Lett., vol. 13, no. 8, pp. 3864–3869, 2013.
[44]Khan, S., Dahiya, R. S., and Lorenzelli, L., “Flexible thermoelectric generator based on transfer printed Si microwires,” in Solid State Device Research Conference (ESSDERC), 2014 44th European, 2014, pp. 86–89: IEEE.
[45]Khan, S., Yogeswaran, N., Taube, W., Lorenzelli, L., and Dahiya, R., “Flexible FETs using ultrathin Si microwires embedded in solution processed dielectric and metal layers,” J. Micromech. Microeng., vol. 25, no. 12, p. 125019, 2015.
[46]Khan, S., Lorenzelli, L., and Dahiya, R., “Flexible MISFET devices from transfer printed Si microwires and spray coating,” IEEE. J. Electron. Devi., vol. 4, no. 4, pp. 189–196, 2016.
[47]Dang, W., Vinciguerra, V., Lorenzelli, L., and Dahiya, R., “Printable stretchable interconnects,” Flex. Print. Electron., vol. 2, no. 1, p. 013003, 2017.
[48]Dahiya, R. S., Adami, A., Collini, C., and Lorenzelli, L., “Fabrication of single crystal silicon micro-/nanostructures and transferring them to flexible substrates,” Microelectron. Eng., vol. 98, pp. 502–507, 2012.
[49]Shakthivel, D., García Núñez, C., and Dahiya, R., “Inorganic semiconducting nanowires for flexible electronics,” United Scholars Publications, USA, 2016.
[50]Choi, M.-C., Kim, Y., and Ha, C.-S., “Polymers for flexible displays: From material selection to device applications,” Prog. Polym. Sci., vol. 33, no. 6, pp. 581–630, 2008.
[51]Kwiat, M., Cohen, S., Pevzner, A., and Patolsky, F., “Large-scale ordered 1D-nanomaterials arrays: Assembly or not?,” Nano Today, vol. 8, no. 6, pp. 677–694, 2013.
[52]Long, Y.-Z., Yu, M., Sun, B., Gu, C.-Z., and Fan, Z., “Recent advances in large-scale assembly of semiconducting inorganic nanowires and nanofibers for electronics, sensors and photovoltaics,” Chem. Soc. Rev., vol. 41, no. 12, pp. 4560–4580, 2012.
[53]Javey, A., Nam, S., Friedman, R. S., Yan, H., and Lieber, C. M., “Layer-by-layer assembly of nanowires for three-dimensional, multifunctional electronics,” Nano Lett., vol. 7, no. 3, pp. 773–777, 2007.
[54]Shakthivel, D., Liu, F., Núñez, C. G., Taube, W., and Dahiya, R., “Nanomaterials processing for flexible electronics,” in Industrial Electronics (ISIE), 2017 IEEE 26th International Symposium on, 2017, pp. 2102–2106: IEEE.
[55]Su, B., Wu, Y., and Jiang, L., “The art of aligning one-dimensional (1D) nanostructures,” Chem. Soc. Rev., vol. 41, no. 23, pp. 7832–7856, 2012.
[56]Dahiya, R., Gottardi, G., and Laidani, N., “PDMS residues-free micro/macrostructures on flexible substrates,” Microelectron. Eng., vol. 136, pp. 57–62, 2015.
[57]Fan, Z., et al., “Toward the development of printable nanowire electronics and sensors,” Adv. Mater., vol. 21, no. 37, pp. 3730–3743, 2009.
[58]Wang, N., Cai, Y., and Zhang, R. Q., “Growth of nanowires,” Mater. Sci. Eng. Rep., vol. 60, no. 1–6, pp. 1–51, 3/31/ 2008.
[59]Zhang, A., Zheng, G., and Lieber, C. M., Nanowires: Building blocks for nanoscience and nanotechnology. Springer, 2016.
[60]Amato, M., Palummo, M., Rurali, R., and Ossicini, S., “Silicon–germanium nanowires: chemistry and physics in play, from basic principles to advanced applications,” Chem. Rev., vol. 114, no. 2, pp. 1371–1412, 2013.
[61]Singh, N., et al., “Si, SiGe nanowire devices by top-down technology and their applications,” IEEE. T. Electron. Dev., vol. 55, no. 11, pp. 3107–3118, 2008.
[62]Hobbs, R. G., Petkov, N., and Holmes, J. D., “Semiconductor nanowire fabrication by bottom-up and top-down paradigms,” Chem. Mater., vol. 24, no. 11, pp. 1975–1991, 2012.
[63]Wagner, R. S. and Ellis, W. C., “Vapor‐liquid‐solid mechanism of single crystal growth,” Appl. Phys. Lett, vol. 4, no. 5, pp. 89–90, 1964.
[64]Wagner, R. and Doherty, C., “Controlled vapor‐liquid‐solid growth of silicon crystals,” J. Electrochem. Soc., vol. 113, no. 12, pp. 1300–1305, 1966.
[65]Wagner, R. and Ooherty, C., “Mechanism of branching and kinking during VLS crystal growth,” J. Electrochem. Soc., vol. 115, no. 1, pp. 93–99, 1968.
[66]Liu, X., Long, Y.-Z., Liao, L., Duan, X., and Fan, Z., “Large-scale integration of semiconductor nanowires for high-performance flexible electronics,” ACS Nano, vol. 6, no. 3, pp. 1888–1900, 2012.
[67]Shakthivel, D., Taube, W., Raghavan, S., and Dahiya, R., “VLS growth mechanism of Si-nanowires for flexible electronics,” in IEEE 11th Conference on Ph. D. Research in Microelectronics and Electronics (PRIME), 2015, pp. 349–352.
[68]Fan, H. J., Bertram, F., Dadgar, A., Christen, J., Krost, A., and Zacharias, M., “Self-assembly of ZnO nanowires and the spatial resolved characterization of their luminescence,” Nanotechnology, vol. 15, no. 11, p. 1401, 2004.
[69]Dai, Z. R., Pan, Z. W., and Wang, Z. L., “Novel nanostructures of functional oxides synthesized by thermal evaporation,” Adv. Funct. Mater, vol. 13, no. 1, pp. 9–24, 2003.
[70]Scott, C. D., Arepalli, S., Nikolaev, P., and Smalley, R. E., “Growth mechanisms for single-wall carbon nanotubes in a laser-ablation process,” Appl. Phys. A-Mater., vol. 72, no. 5, pp. 573–580, May 2001.
[71]Jung, S. H., et al., “High-yield synthesis of multi-walled carbon nanotubes by arc discharge in liquid nitrogen,” Appl. Phys. A-Mater., vol. 76, no. 2, pp.285–286, Feb 2003.
[72]Shang, N. G., Tan, Y. Y., Stolojan, V., Papakonstantinou, P., and Silva, S. R. P., “High-rate low-temperature growth of vertically aligned carbon nanotubes,” Nanotechnology, vol. 21, no. 50, p. 6, Dec 2010.
[73]Tan, Y. Y., et al., “Photo-thermal chemical vapor deposition growth of graphene,” Carbon, vol. 50, no. 2, pp.668–673, Feb 2012.
[74]Ahn, J.-H., et al., “Heterogeneous three-dimensional electronics by use of printed semiconductor nanomaterials,” Science, vol. 314, no. 5806, pp.1754–1757, 2006.
[75]Yerushalmi, R., Jacobson, Z. A., Ho, J. C., Fan, Z., and Javey, A., “Large scale, highly ordered assembly of nanowire parallel arrays by differential roll printing,” Appl. Phys. Lett, vol. 91, no. 20, p. 203104, 2007.
[76]Schmidt, V., Wittemann, J. V., and Gösele, U., “Growth, thermodynamics, and electrical properties of silicon nanowires,” Chem. Rev., vol. 110, no. 1, pp. 361–388, 2010.
[77]Schmidt, V., Wittemann, J. V., Senz, S., and Gösele, U., “Silicon nanowires: a review on aspects of their growth and their electrical properties,” Adv. Mater., vol. 21, no. 25–26, pp. 2681–2702, 2009.
[78]Boskovic, B. O., Stolojan, V., Khan, R. U. A., Haq, S., and Silva, S. R. P., “Large-area synthesis of carbon nanofibres at room temperature,” Nat. Mater., vol. 1, no. 3, pp.165–168, Nov 2002.
[79]Wang, Y., Schmidt, V., Senz, S., and Gösele, U., “Epitaxial growth of silicon nanowires using an aluminium catalyst,” Nat. Nanotechnol., vol. 1, no. 3, pp.186–189, 2006.
[80]Schmid, H., et al., “Patterned epitaxial vapor-liquid-solid growth of silicon nanowires on Si (111) using silane,” J. Appl. Phys., vol. 103, no. 2, p. 024304, 2008.
[81]Lew, K.-K. and Redwing, J. M., “Growth characteristics of silicon nanowires synthesized by vapor–liquid–solid growth in nanoporous alumina templates,” J. Cryst. Growth., vol. 254, no. 1, pp.14–22, 2003.
[82]Fan, H. J., Werner, P., and Zacharias, M., “Semiconductor nanowires: from self‐organization to patterned growth,” Small, vol. 2, no. 6, pp.700–717, 2006.
[83]Ross, F. M., “Controlling nanowire structures through real time growth studies,” Rep. Prog. Phys., vol. 73, no. 11, p.114501, 2010.
[84]Hannon, J., Kodambaka, S., Ross, F., and Tromp, R., “The influence of the surface migration of gold on the growth of silicon nanowires,” Nature, vol. 440, no. 7080, pp.69–71, 2006.
[85]Wen, C.-Y., et al., “Periodically changing morphology of the growth interface in Si, Ge, and GaP nanowires,” Phys. Rev. Lett., vol. 107, no. 2, p. 025503, 2011.
[86]Moutanabbir, O., Isheim, D., Blumtritt, H., Senz, S., Pippel, E., and Seidman, D. N., “Colossal injection of catalyst atoms into silicon nanowires,” Nature, vol. 496, no. 7443, pp.78–82, 2013.
[87]Allen, J. E., et al., “High-resolution detection of Au catalyst atoms in Si nanowires,” Nat. Nanotechnol., vol. 3, no. 3, pp.168–173, 2008.
[88]Lensch-Falk, J. L., Hemesath, E. R., Perea, D. E., and Lauhon, L. J., “Alternative catalysts for VSS growth of silicon and germanium nanowires,” J. Mater. Chem., 10.1039/B817391E vol. 19, no. 7, pp.849–857, 2009.
[89]Baron, T., Gordon, M., Dhalluin, F., Ternon, C., Ferret, P., and Gentile, P., “Si nanowire growth and characterization using a microelectronics-compatible catalyst: PtSi,” Appl. Phys. Lett., vol. 89, no. 23, p.233111, 2006.
[90]Cao, L., Garipcan, B., Atchison, J. S., Ni, C., Nabet, B., and Spanier, J. E., “Instability and transport of metal catalyst in the growth of tapered silicon nanowires,” Nano Lett., vol. 6, no. 9, pp. 1852–1857, 2006.
[91]Schmidt, V., Senz, S., and Gösele, U., “Diameter dependence of the growth velocity of silicon nanowires synthesized via the vapor-liquid-solid mechanism,” Phys. Rev. B, vol. 75, no. 4, p.045335, 2007.
[92]Pinion, C. W., Nenon, D. P., Christesen, J. D., and Cahoon, J. F., “Identifying crystallization- and incorporation-limited regimes during vapor–liquid–solid growth of Si nanowires,” ACS Nano, vol. 8, no. 6, pp. 6081–6088, 2014.
[93]Dubrovskii, V. G., Nucleation theory and growth of nanostructures. Springer, 2014.
[94]Handbook, A., “Vol. 3: Alloy phase diagrams,” ASM International, vol. 9, p. 2, 1992.
[95]Sunkara, M. K., Sharma, S., Miranda, R., Lian, G., and Dickey, E., “Bulk synthesis of silicon nanowires using a low-temperature vapor–liquid–solid method,” Appl. Phys. Lett, vol. 79, no. 10, pp. 1546–1548, 2001.
[96]Sharma, S. and Sunkara, M., “Direct synthesis of single-crystalline silicon nanowires using molten gallium and silane plasma,” Nanotechnology, vol. 15, no. 1, p. 130, 2003.
[97]Choi, S.-Y., Fung, W. Y., and Lu, W., “Growth and electrical properties of Al-catalyzed Si nanowires,” Appl. Phys. Lett., vol. 98, no. 3, p. 033108, 2011.
[98]Arbiol, J., Kalache, B., Cabarrocas, P. R. i, Morante, J. R, and Morral, A. F. i, “Influence of Cu as a catalyst on the properties of silicon nanowires synthesized by the vapour–solid–solid mechanism,” Nanotechnology, vol. 18, no. 30, p. 305606, 2007.
[99]Khan, S., Lorenzelli, L., and Dahiya, R. S., “Technologies for printing sensors and electronics over large flexible substrates: a review,” IEEE. Sens. J., vol. 15, no. 6, pp. 3164–3185, 2015.
[100]Kim, D.-H., et al., “Stretchable and foldable silicon integrated circuits,” Science, vol. 320, no. 5875, pp. 507–511, 2008.
[101]Kang, S. J., et al., “High-performance electronics using dense, perfectly aligned arrays of single-walled carbon nanotubes,” Nat. Nanotechnol., vol. 2, no. 4, p. 230, 2007.
[102]Han, H., Huang, Z., and Lee, W., “Metal-assisted chemical etching of silicon and nanotechnology applications,” Nano Today, vol. 9, no. 3, pp. 271–304, 2014.
[103]Lu, W. and Lieber, C. M., “Nanoelectronics from the bottom up,” Nat. Mater., vol. 6, no. 11, pp. 841–850, 2007.
[104]Cui, Y. and Lieber, C. M., “Functional nanoscale electronic devices assembled using silicon nanowire building blocks,” Science, vol. 291, no. 5505, pp. 851–853, 2001.
[105]Fuhrmann, B., Leipner, H. S., Höche, H.-R., Schubert, L., Werner, P., and Gösele, U., “Ordered arrays of silicon nanowires produced by nanosphere lithography and molecular beam epitaxy,” Nano Lett., vol. 5, no. 12, pp. 2524–2527, 2005.
[106]Morales, A. M. and Lieber, C. M., “A laser ablation method for the synthesis of crystalline semiconductor nanowires,” Science, vol. 279, no. 5348, pp. 208–211, 1998.
[107]Zhang, Y., et al., “Silicon nanowires prepared by laser ablation at high temperature,” Appl. Phys. Lett., vol. 72, no. 15, pp. 1835–1837, 1998.
[108]Lee, J.-S., Kang, M.-I., Kim, S., Lee, M.-S., and Lee, Y.-K., “Growth of zinc oxide nanowires by thermal evaporation on vicinal Si (100) substrate,” J. Cryst. Growth., vol. 249, no. 1, pp. 201–207, 2003.
[109]Bierman, M. J., Lau, Y. A., Kvit, A. V., Schmitt, A. L., and Jin, S., “Dislocation-driven nanowire growth and Eshelby twist,” Science, vol. 320, no. 5879, pp. 1060–1063, 2008.
[110]Khalaf, M. M., Ibrahimov, H. G., and Ismailov, E. H., “Nanostructured materials: importance, synthesis and characterization—a review,” Chemistry Journal vol. 2, no. 3, pp. 118–125, 2012.
[111]Hitchman, M. L. and Jensen, K. F., Chemical vapor deposition: principles and applications. Elsevier, 1993.
[112]Pierson, H. O., Handbook of chemical vapor deposition: principles, technology and applications. William Andrew, 1999.
[113]Kim, B., Tersoff, J., Kodambaka, S., Reuter, M., Stach, E., and Ross, F., “Kinetics of individual nucleation events observed in nanoscale vapor-liquid-solid growth,” Science, vol. 322, no. 5904, pp. 1070–1073, 2008.
[114]Hofmann, S., et al., “In situ observations of catalyst dynamics during surface-bound carbon nanotube nucleation,” Nano Lett., vol. 7, no. 3, pp. 602–608, 2007.
[115]Gamalski, A., Ducati, C., and Hofmann, S., “Cyclic supersaturation and triple phase boundary dynamics in germanium nanowire growth,” J. Phys. Chem. B, vol. 115, no. 11, pp. 4413–4417, 2011.
[116]Xiang, J., Lu, W., Hu, Y., Wu, Y., Yan, H., and Lieber, C. M., “Ge/Si nanowire heterostructures as high-performance field-effect transistors,” Nature, vol. 441, no. 7092, pp. 489–493, 2006.
[117]Qian, F., Li, Y., Gradecak, S., Wang, D., Barrelet, C. J., and Lieber, C. M., “Gallium nitride-based nanowire radial heterostructures for nanophotonics,” Nano Lett., vol. 4, no. 10, pp. 1975–1979, 2004.
[118]Schmid, H., Björk, M. T., Knoch, J., Karg, S., Riel, H., and Riess, W., “Doping limits of grown in situ doped silicon nanowires using phosphine,” Nano Lett., vol. 9, no. 1, pp. 173–177, 2008.
[119]Wallentin, J. and Borgström, M. T., “Doping of semiconductor nanowires,” J. Mater. Res., vol. 26, no. 17, pp. 2142–2156, 2011.
[120]Yang, C., Zhong, Z., and Lieber, C. M., “Encoding electronic properties by synthesis of axial modulation-doped silicon nanowires,” Science, vol. 310, no. 5752, pp. 1304–1307, 2005.
[121]Givargizov, E., “Fundamental aspects of VLS growth,” J. Cryst. Growth., vol. 31, pp. 20–30, 1975.
[122]Givargizov, E. I. and Sheftal, N. N., “Morphology of silicon whiskers grown by the VLS-technique,” J. Cryst. Growth, vol. 9, no. 0, pp. 326–329, 5, 1971.
[123]Bootsma, G. and Gassen, H., “A quantitative study on the growth of silicon whiskers from silane and germanium whiskers from germane,” J. Cryst. Growth, vol. 10, no. 3, pp. 223–234, 1971.
[124]Kodambaka, S., Tersoff, J., Reuter, M., and Ross, F., “Diameter-independent kinetics in the vapor-liquid-solid growth of Si nanowires,” Phys. Rev. Lett., vol. 96, no. 9, p. 096105, 2006.
[125]Laidler, K. J., Chemical Kinetics. Delhi: Pearson Education, 2008.
[126]Fröberg, L., Seifert, W., and Johansson, J., “Diameter-dependent growth rate of InAs nanowires,” Phys. Rev. B, vol. 76, no. 15, p. 153401, 2007.
[127]Kashchiev, D., “Dependence of the growth rate of nanowires on the nanowire diameter,” Cryst. Growth. Des., vol. 6, no. 5, pp. 1154–1156, 2006.
[128]Shakthivel, D. and Raghavan, S., “Vapor-liquid-solid growth of Si nanowires: A kinetic analysis,” J. Appl. Phys., vol. 112, no. 2, p. 024317, 2012.
[129]Mårtensson, T., et al., “Epitaxial III−V Nanowires on Silicon,” Nano Lett., vol. 4, no. 10, pp. 1987–1990, 2004.
[130]Zhang, R. Q., Lifshitz, Y., and Lee, S. T., “Oxide‐assisted growth of semiconducting nanowires,” Adv. Mater., vol. 15, no. 7–8, pp. 635–640, 2003.
[131]Kolb, F., et al., “Analysis of silicon nanowires grown by combining SiO evaporation with the VLS mechanism,” J. Electrochem. Soc., vol. 151, no. 7, pp. G472–G475, 2004.
[132]Huang, M. H., Wu, Y., Feick, H., Tran, N., Weber, E., and Yang, P., “Catalytic growth of zinc oxide nanowires by vapor transport,” Adv. Mater., vol. 13, no. 2, pp. 113–116, 2001.
[133]Persson, A. I., Larsson, M. W., Stenström, S., Ohlsson, B. J., Samuelson, L., and Wallenberg, L. R., “Solid-phase diffusion mechanism for GaAs nanowire growth,” Nat. Mater., vol. 3, no. 10, pp. 677–681, 2004.
[134]Kamins, T., Li, X., Williams, R. S., and Liu, X., “Growth and structure of chemically vapor deposited Ge nanowires on Si substrates,” Nano Lett., vol. 4, no. 3, pp. 503–506, 2004.
[135]Dubrovskii, V., Sibirev, N., and Cirlin, G., “Kinetic model of the growth of nanodimensional whiskers by the vapor-liquid-crystal mechanism,” Tech. Phys. Lett., vol. 30, no. 8, pp. 682–686, 2004.
[136]Hofmann, S., et al., “Ledge-flow-controlled catalyst interface dynamics during Si nanowire growth,” Nat. Mater., vol. 7, no. 5, p. 372, 2008.
[137]Zhao, H., Zhou, S., Hasanali, Z., and Wang, D., “Influence of pressure on silicon nanowire growth kinetics,” J. Phys. Chem. B, vol. 112, no. 15, pp. 5695–5698, 2008.
[138]Pal, D., Kowar, M., Daw, A., and Roy, P., “Modelling of silicon epitaxy using silicon tetrachloride as the source,” Microelectr. J., vol. 26, no. 6, pp. 507–514, 1995.
[139]Zambov, L., “Kinetics of homogeneous decomposition of silane,” J. Cryst. Growth, vol. 125, no. 1, pp. 164–174, 1992.
[140]Dubrovskii, V., Sibirev, N., Cirlin, G., Harmand, J., and Ustinov, V., “Theoretical analysis of the vapor-liquid-solid mechanism of nanowire growth during molecular beam epitaxy,” Phys. Rev. E, vol. 73, no. 2, p. 021603, 2006.
[141]Johansson, J., Wacaser, B. A., Dick, K. A., and Seifert, W., “Growth related aspects of epitaxial nanowires,” Nanotechnology, vol. 17, no. 11, p. S355, 2006.
[142]Hirth, J. P. and Pound, G. M., Condensation and evaporation; nucleation and growth kinetics. Macmillan, 1963.
[143]Markov, I., “Crystal growth for beginners: fundamentals of nucleation,” Crystal Growth and Epitaxy, p. 69, 1995.
[144]Wacaser, B. A., Dick, K. A., Johansson, J., Borgström, M. T., Deppert, K., and Samuelson, L., “Preferential interface nucleation: an expansion of the VLS growth mechanism for nanowires,” Adv. Mater., vol. 21, no. 2, pp. 153–165, 2009.
[145]Shakthivel, D., Rathkanthiwar, S., and Raghavan, S., “Si nanowire growth on sapphire: Classical incubation, reverse reaction, and steady state supersaturation,” J. Appl. Phys., vol. 117, no. 16, p. 164302, 2015.
[146]Kalache, B., i Cabarrocas, P. R., and i Morral, A. F., “Observation of incubation times in the nucleation of silicon nanowires obtained by the vapor–liquid–solid method,” Jpn. J. Appl. Phys., vol. 45, no. 2L, p. L190, 2006.
[147]Kreupl, F., et al., “Carbon nanotubes in interconnect applications,” Microelectron. Eng., vol. 64, no. 1–4, pp. 399–408, Oct 2002.
[148]Kroto, H. W., Heath, J. R., Obrien, S. C., Curl, R. F., and Smalley, R. E., “C-60 – Buckminsterfullerene,” (in English), Nature, vol. 318, no. 6042, pp. 162–163, 1985.
[149]Iijima, S., “Helical Microtubules of Graphitic Carbon,” Nature, vol. 354, no. 6348, pp. 56–58, Nov 1991.
[150]Wei, B. Q., Vajtai, R., and Ajayan, P. M., “Reliability and current carrying capacity of carbon nanotubes,” (in English), Appl. Phys. Lett., vol. 79, no. 8, pp. 1172–1174, Aug 2001.
[151]Frank, S., Poncharal, P., Wang, Z. L., and de Heer, W. A., “Carbon nanotube quantum resistors” (in English), Science, vol. 280, no. 5370, pp. 1744–1746, Jun 1998.
[152]Dresselhaus, M. S., Dresselhaus, G., and Avouris, P., Carbon nanotubes: synthesis, structure, properties, and applications, Springer Books 2001.
[153]Hata, K., Futaba, D. N., Mizuno, K., Namai, T., Yumura, M., and Iijima, S., “Water-assisted highly efficient synthesis of impurity-free single-waited carbon nanotubes,” Science, vol. 306, no. 5700, pp. 1362–1364, Nov 19 2004.
[154]Thostenson, E. T., Ren, Z. F., and Chou, T. W., “Advances in the science and technology of carbon nanotubes and their composites: a review,” Compos. Sci. Technol., vol. 61, no. 13, pp. 1899–1912, 2001.
[155]Dresselhaus, M. S., Dresselhaus, G., Saito, R., and Jorio, A., “Raman spectroscopy of carbon nanotubes,” Phys. Rep., vol. 409, no. 2, pp. 47–99, Mar 2005.
[156]Saito, R., Dresselhaus, G., and Dresselhaus, M. S., Physical properties of carbon nanotubes, London: Imperial College Press, 1998.
[157]Popov, V. N., “Carbon nanotubes: properties and application,” Mater. Sci. Eng. Rep., vol. 43, no. 3, pp. 61–102, Jan 15 2004.
[158]Dresselhaus, M. S., Jorio, A., and Saito, R., “Characterizing graphene, graphite, and carbon nanotubes by raman spectroscopy,” in Annu. Rev. Conden. Ma. P, vol. 1, 2010, pp. 89–108.
[159]Park, S., Vosguerichian, M., and Bao, Z., “A review of fabrication and applications of carbon nanotube film-based flexible electronics,” Nanoscale, vol. 5, no. 5, pp. 1727–1752, 2013.
[160]Tans, S. J., et al., “Individual single-wall carbon nanotubes as quantum wires,” Nature, vol. 386, no. 6624, pp. 474–477, Apr 1997.
[161]Bachtold, A., et al., “Aharonov-Bohm oscillations in carbon nanotubes,” Nature, vol. 397, no. 6721, pp. 673–675, 1999.
[162]Roth, S., Krstic, V., and Rikken, G., “Quantum transport in carbon nanotubes,” Curr. Appl. Phys., vol. 2, no. 2, pp. 155–161, 2002.
[163]Maruyama, R., Nam, Y. W., Han, J. H., and Strano, M. S., “Well-defined single-walled carbon nanotube fibers as quantum wires: Ballistic conduction over micrometer-length scales,” Curr. Appl. Phys., vol. 11, no. 6, pp. 1414–1418, Nov 2011.
[164]Kong, J., et al., “Quantum interference and ballistic transmission in nanotube electron waveguides,” Phys. Rev. Lett., vol. 87, no. 10, p. 4, Sep 2001, Art. no. 106801.
[165]Javey, A., Guo, J., Wang, Q., Lundstrom, M., and Dai, H. J., “Ballistic carbon nanotube field-effect transistors,” Nature, vol. 424, no. 6949, pp. 654–657, Aug 2003.
[166]Rutherglen, C. and Burke, P., “Nanoelectromagnetics: circuit and electromagnetic properties of carbon nanotubes,” Small, vol. 5, no. 8, pp. 884–906, Apr 2009.
[167]Fan, Y. W., Goldsmith, B. R., and Collins, P. G., “Identifying and counting point defects in carbon nanotubes,” Nat. Mater., vol. 4, no. 12, pp. 906–911, Dec 2005.
[168]Ando, Y., Zhao, X., Sugai, T., and Kumar, M., “Growing carbon nanotubes,” Mater. Today., vol. 7, no. 10, pp. 22–29, 2004.
[169]Ando, Y., “Carbon nanotube: the inside story,” J. Nanosci. Nanotechno., vol. 10, no. 6, pp. 3726–3738, Jun 2010.
[170]Colbert, D. T., et al., “Growth and sintering of fullerene nanotubes,” Science, vol. 266, no. 5188, pp. 1218–1222, Nov 1994.
[171]Ebbesen, T. W. and Ajayan, P. M., “Large-scale synthesis of carbon nanotubes,” Nature vol. 358, pp. 220–222, 1992.
[172]Ebbesen, T. W., Ajayan, P. M., Hiura, H., and Tanigaki, K., “Purification of nanotubes,” Nature, Letter vol. 367, no. 6463, pp. 519–519, Feb 1994.
[173]Tessonnier, J.-P. and Su, D. S., “Recent progress on the growth mechanism of carbon nanotubes: a review,” Chemsuschem, vol. 4, no. 7, pp. 824–847, 2011.
[174]Anazawa, K., Shimotani, K., Manabe, C., Watanabe, H., and Shimizu, M., “High-purity carbon nanotubes synthesis method by an arc discharging in magnetic field,” Appl. Phys. Lett., vol. 81, no. 4, pp. 739–741, Jul 2002.
[175]McAlpine, M. C., Ahmad, H., Wang, D., and Heath, J. R., “Highly ordered nanowire arrays on plastic substrates for ultrasensitive flexible chemical sensors,” Nat. Mater., vol. 6, no. 5, p. 379, 2007.
[176]Farhat, S., et al., “Diameter control of single-walled carbon nanotubes using argon-helium mixture gases,” J. Chem. Phys., vol. 115, no. 14, pp. 6752–6759, Oct 2001.
[177]Guo, T., et al., “Uranium stabilization of C28 – a tetravalent fullerene,” Science, vol. 257, no. 5077, pp. 1661–1664, Sep 1992.
[178]Thess, A., et al., “Crystalline ropes of metallic carbon nanotubes,” Science, vol. 273, no. 5274, pp. 483–487, Jul 1996.
[179]Bandow, S., Rao, A. M., Williams, K. A., Thess, A., Smalley, R. E., and Eklund, P. C., “Purification of single-wall carbon nanotubes by microfiltration,” J. Phys. Chem. B, Letter vol. 101, no. 44, pp. 8839–8842, Oct 1997.
[180]Ishii, H., et al., “Direct observation of Tomonaga-Luttinger-liquid state in carbon nanotubes at low temperatures,” Nature, vol. 426, no. 6966, pp. 540–544, Dec 2003.
[181]Eklund, P. C., et al., “Large-scale production of single-walled carbon nanotubes using ultrafast pulses from a free electron laser,” Nano Lett., vol. 2, no. 6, pp. 561–566, Jun 2002.
[182]Bolshakov, A. P., et al., “A novel CW laser-powder method of carbon single-wall nanotubes production,” Diam. Relat. Mater., vol. 11, no. 3–6, pp. 927–930, Mar–Jun 2002.
[183]Endo, M., Takeuchi, K., Igarashi, S., Kobori, K., Shiraishi, M., and Kroto, H. W., “The production and structure of pyrolytic carbon nanotubes (PNTs),” J. Phys. Chem. Solids., vol. 54, no. 12, pp. 1841–1848, Dec 1993.
[184]Kumar, M. and Ando, Y., “Chemical vapor deposition of carbon nanotubes: a review on growth mechanism and mass production,” J. Nanosci. Nanotechno., vol. 10, no. 6, pp. 3739–3758, Jun 2010.
[185]Ren, Z. F., et al., “Growth of a single freestanding multiwall carbon nanotube on each nanonickel dot,” Appl. Phys. Lett., vol. 75, no. 8, pp. 1086–1088, Aug 1999.
[186]Ren, Z. F., et al., “Synthesis of large arrays of well-aligned carbon nanotubes on glass,” Science, vol. 282, no. 5391, pp. 1105–1107, Nov 1998.
[187]Yudasaka, M., Kikuchi, R., Matsui, T., Ohki, Y., Yoshimura, S., and Ota, E., “Specific conditions for Ni catalyzed carbon nanotube growth by chemical-vapor-deposition,” Appl. Phys. Lett., vol. 67, no. 17, pp. 2477–2479, Oct 1995.
[188]Yudasaka, M., Kikuchi, R., Ohki, Y., Ota, E., and Yoshimura, S., “Behavior of Ni in carbon nanotube nucleation,” Appl. Phys. Lett., vol. 70, no. 14, pp. 1817–1818, Apr 1997.
[189]Seah, C.-M., Chai, S.-P., and Mohamed, A. R., “Synthesis of aligned carbon nanotubes,” Carbon, vol. 49, no. 14, pp. 4613–4635, Nov 2011.
[190]Azam, M. A., Manaf, N. S. A., Talib, E., and Bistamam, M. S. A., “Aligned carbon nanotube from catalytic chemical vapor deposition technique for energy storage device: a review,” Ionics, vol. 19, no. 11, pp. 1455–1476, 2013.
[191]Sinnott, S. B., et al., “Model of carbon nanotube growth through chemical vapor deposition,” Chem. Phys. Lett., vol. 315, no. 1–2, pp. 25–30, Dec 1999.
[192]Li, Q., et al., “Sustained growth of ultralong carbon nanotube arrays for fiber spinning,” Adv. Mater., vol. 18, no. 23, pp. 3160–3163, Dec 4 2006.
[193]Amama, P. B., et al., “Role of water in super growth of single-walled carbon nanotube carpets,” Nano Lett., vol. 9, no. 1, pp. 44–49, 2009.
[194]Wen, Q., et al., “Growing 20 cm long DWNTs/TWNTs at a rapid growth rate of 80–90 um/s,” Chem. Mater., vol. 22, no. 4, pp. 1294–1296, 2010.
[195]Cassell, A. M., Raymakers, J. A., Kong, J., and Dai, H. J., “Large scale CVD synthesis of single-walled carbon nanotubes,” J. Phys. Chem. B, vol. 103, no. 31, pp. 6484–6492, Aug 1999.
[196]Dai, H. J., et al., “Controlled chemical routes to nanotube architectures, physics, and devices,” (in English), J. Phys. Chem. B, vol. 103, no. 51, pp. 11246–11255, Dec 1999.
[197]Kong, J., Cassell, A. M., and Dai, H. J., “Chemical vapor deposition of methane for single-walled carbon nanotubes,” Chem. Phys. Lett., vol. 292, no. 4–6, pp. 567–574, Aug 1998.
[198]Kong, J., Soh, H. T., Cassell, A. M., Quate, C. F., and Dai, H. J., “Synthesis of individual single-walled carbon nanotubes on patterned silicon wafers,” Nature, vol. 395, no. 6705, pp. 878–881, Oct 1998.
[199]Ahmad, M., Anguita, J. V., Stolojan, V., Carey, J. D., and Silva, S. R. P., “Efficient coupling of optical energy for rapid catalyzed nanomaterial growth: high-quality carbon nanotube synthesis at low substrate temperatures,” ACS Appl. Mater. Inter, vol. 5, no. 9, pp. 3861–3866, May 8 2013.
[200]Ahmad, M., et al., “High quality carbon nanotubes on conductive substrates grown at low temperatures,” Adv. Funct. Mater, vol. 25, no. 28, pp. 4419–4429, 2015.
[201]Ahmad, M., “Carbon nanotube based integrated circuit interconnects,” University of Surrey, Faculty of Engineering and Physical Sciences, Department of Electronic Engineering Thesis (Ph.D.) – University of Surrey, 2013.
[202]Chen, G. Y., Jensen, B., Stolojan, V., and Silva, S. R. P., “Growth of carbon nanotubes at temperatures compatible with integrated circuit technologies,” Carbon, vol. 49, no. 1, pp. 280–285, Jan 2011.
[203]Su, M., Zheng, B., and Liu, J., “A scalable CVD method for the synthesis of single-walled carbon nanotubes with high catalyst productivity,” Chem. Phys. Lett., vol. 322, no. 5, pp. 321–326, May 2000.
[204]Alexandrescu, R., et al., “Synthesis of carbon nanotubes by CO2-laser-assisted chemical vapour deposition,” Infrared. Phys. Techn., vol. 44, no. 1, pp. 43–50, Feb 2003.
[205]Maruyama, S., Miyauchi, Y., Murakami, Y., and Chiashi, S., “Optical characterization of single-walled carbon nanotubes synthesized by catalytic decomposition of alcohol,” New. J. Phys., vol. 5, p. 12, Oct 2003.
[206]Bower, C., Zhu, W., Jin, S. H., and Zhou, O., “Plasma-induced alignment of carbon nanotubes,” Appl. Phys. Lett., vol. 77, no. 6, pp. 830–832, Aug 2000.
[207]Merkulov, V. I., Lowndes, D. H., Wei, Y. Y., Eres, G., and Voelkl, E., “Patterned growth of individual and multiple vertically aligned carbon nanofibers,” Appl. Phys. Lett., vol. 76, no. 24, pp. 3555–3557, Jun 2000.
[208]Teo, K. B. K., et al., “Uniform patterned growth of carbon nanotubes without surface carbon,” Appl. Phys. Lett, vol. 79, no. 10, pp. 1534–1536, Sep 2001.
[209]Anguita, J. V., Cox, D. C., Ahmad, M., Tan, Y. Y., Allam, J., and Silva, S. R. P., “Highly transmissive carbon nanotube forests grown at low substrate temperature,” Adv. Funct. Mater., 2013.
[210]Chhowalla, M., et al., “Growth process conditions of vertically aligned carbon nanotubes using plasma enhanced chemical vapor deposition,” J. Appl. Phys., vol. 90, no. 10, pp. 5308–5317, Nov 15 2001.
[211]Maruyama, S., Kojima, R., Miyauchi, Y., Chiashi, S., and Kohno, M., “Low-temperature synthesis of high-purity single-walled carbon nanotubes from alcohol,” Chem. Phys. Lett., vol. 360, no. 3–4, pp. 229–234, Jul 10 2002.
[212]Sen, R., Govindaraj, A., and Rao, C. N. R., “Carbon nanotubes by the metallocene route,” Chem. Phys. Lett., vol. 267, no. 3–4, pp. 276–280, Mar 21 1997.
[213]Kumar, M. and Ando, Y., “A simple method of producing aligned carbon nanotubes from an unconventional precursor – Camphor,” Chem. Phys. Lett., vol. 374, no. 5–6, pp. 521–526, Jun 18 2003.
[214]Li, Q. W., Yan, H., Zhang, J., and Liu, Z. F., “Effect of hydrocarbons precursors on the formation of carbon nanotubes in chemical vapor deposition,” Carbon, vol. 42, no. 4, pp. 829–835, 2004.
[215]Yuan, D., Ding, L., Chu, H., Feng, Y., McNicholas, T. P., and Liu, J., “Horizontally aligned single-walled carbon nanotube on quartz from a large variety of metal catalysts,” Nano Lett., vol. 8, no. 8, pp. 2576–2579, Aug 2008.
[216]Seidel, R., Duesberg, G. S., Unger, E., Graham, A. P., Liebau, M., and Kreupl, F., “Chemical vapor deposition growth of single-walled carbon nanotubes at 600 degrees C and a simple growth model,” J. Phys. Chem. B, vol. 108, no. 6, pp. 1888–1893, Feb 12 2004.
[217]Meshot, E. R., Plata, D. L., Tawfick, S., Zhang, Y., Verploegen, E. A., and Hart, A. J., “Engineering vertically aligned carbon nanotube growth by decoupled thermal treatment of precursor and catalyst,” ACS Nano, vol. 3, no. 9, pp. 2477–2486, Sep 2009.
[218]Lee, K. Y., et al., “Vertically aligned growth of carbon nanotubes with long length and high density,” J. Vac. Sci. Technol. B., vol. 23, no. 4, pp. 1450–1453, Jul–Aug 2005.
[219]Nessim, G. D., et al., “Tuning of vertically-aligned carbon nanotube diameter and areal density through catalyst pre-treatment,” Nano Lett., vol. 8, no. 11, pp. 3587–3593, Nov 2008.
[220]Carey, J. D., Ong, L. L., and Silva, S. R. P., “Formation of low-temperature self-organized nanoscale nickel metal islands,” Nanotechnology, vol. 14, no. 11, pp. 1223–1227, Nov 2003.
[221]Bayer, B. C., et al., “Co-catalytic solid-state reduction applied to carbon nanotube growth,” J. Phys. Chem. B, vol. 116, no. 1, pp. 1107–1113, Jan 12 2012.
[222]Ago, H., Nakamura, K., Uehara, N., and Tsuji, M., “Roles of metal-support interaction in growth of single- and double-walled carbon nanotubes studied with diameter-controlled iron particles supported on MgO,” J. Phys. Chem. B, vol. 108, no. 49, pp. 18908–18915, Dec 9 2004.
[223]Jung, Y. J., Wei, B. Q., Vajtai, R., and Ajayan, P. M., “Mechanism of selective growth of carbon nanotubes on SiO2/Si patterns,” Nano Lett., vol. 3, no. 4, pp. 561–564, Apr 2003.
[224]Esconjauregui, S., et al., “Growth of ultrahigh density vertically aligned carbon nanotube forests for interconnects,” ACS Nano, vol. 4, no. 12, pp. 7431–7436, Dec 2010.
[225]Yokoyama, D., et al., “Low temperature grown carbon nanotube interconnects using inner shells by chemical mechanical polishing,” Appl. Phys. Lett., vol. 91, no. 26, p. 263101, Dec 24 2007.
[226]Okuno, H., et al., “CNT integration on different materials suitable for VLSI interconnects,” C. R. Phys., vol. 11, no. 5–6, pp. 381–388, Jun–Jul 2010.
[227]van der Veen, M. H., et al., “Electrical characterization of CNT contacts with Cu Damascene top contact,” Microelectron. Eng., vol. 106, pp. 106–111, Jun 2013.
[228]Li, J., et al., “Bottom-up approach for carbon nanotube interconnects,” Appl. Phys. Lett, vol. 82, no. 15, pp. 2491–2493, Apr 2003.
[229]Zhang, H., Wu, B., Hu, W., and Liu, Y., “Separation and/or selective enrichment of single-walled carbon nanotubes based on their electronic properties,” Chem. Soc. Rev., vol. 40, no. 3, pp. 1324–1336, 2011.
[230]Harutyunyan, A. R., et al., “Preferential growth of single-walled carbon nanotubes with metallic conductivity,” Science, vol. 326, no. 5949, p. 116, 2009.
[231]Krupke, R., Hennrich, F., v. Löhneysen, H., and Kappes, M. M., “Separation of metallic from semiconducting single-walled carbon nanotubes,” Science, vol. 301, no. 5631, p. 344, 2003.
[232]Mureau, N., Mendoza, E., Silva, S. R. P., Hoettges, K. F., and Hughes, M. P., “In situ and real time determination of metallic and semiconducting single-walled carbon nanotubes in suspension via dielectrophoresis,” Appl. Phys. Lett, vol. 88, no. 24, p. 243109, 2006.
[233]Collins, P. G., Arnold, M. S., and Avouris, P., “Engineering carbon nanotubes and nanotube circuits using electrical breakdown,” Science, vol. 292, no. 5517, p. 706, 2001.
[234]Yudasaka, M., Zhang, M., and Iijima, S., “Diameter-selective removal of single-wall carbon nanotubes through light-assisted oxidation,” Chem. Phys. Lett., vol. 374, no. 1, pp. 132–136, 2003.
[235]Zheng, M., et al., “Structure-based carbon nanotube sorting by sequence-dependent DNA assembly,” Science, vol. 302, no. 5650, p. 1545, 2003.
[236]Tu, X., Manohar, S., Jagota, A., and Zheng, M., “DNA sequence motifs for structure-specific recognition and separation of carbon nanotubes,” Nature, vol. 460, p. 250, 2009.
[237]Takeshi, T., Hehua, J., Yasumitsu, M., and Hiromichi, K., “High-yield separation of metallic and semiconducting single-wall carbon nanotubes by agarose gel electrophoresis,” Appl. Phys. Express, vol. 1, no. 11, p. 114001, 2008.
[238]Tanaka, T., et al., “Simple and scalable gel-based separation of metallic and semiconducting carbon nanotubes,” Nano Lett., vol. 9, no. 4, pp. 1497–1500, 2009.
[239]Duan, W. H., Wang, Q., and Collins, F., “Dispersion of carbon nanotubes with SDS surfactants: a study from a binding energy perspective,” Chem. Sci., vol. 2, no. 7, pp. 1407–1413, 2011.
[240]Silvera-Batista, C. A., Scott, D. C., McLeod, S. M., and Ziegler, K. J., “A mechanistic study of the selective retention of SDS-suspended single-wall carbon nanotubes on agarose gels,” J. Phys. Chem. B, vol. 115, no. 19, pp. 9361–9369, 2011.
[241]Arnold, M. S., Green, A. A., Hulvat, J. F., Stupp, S. I., and Hersam, M. C., “Sorting carbon nanotubes by electronic structure using density differentiation,” Nat. Nanotechnol., vol. 1, p. 60, 2006.
[242]Liu, H., Nishide, D., Tanaka, T., and Kataura, H., “Large-scale single-chirality separation of single-wall carbon nanotubes by simple gel chromatography,” Nat. Commun., vol. 2, p. 309, 2011.
[243]Xu, S. and Wang, Z. L., “One-dimensional ZnO nanostructures: solution growth and functional properties,” Nano. Res., vol. 4, no. 11, pp. 1013–1098, November 01 2011.
[244]Wang, Z. L., “ZnO nanowire and nanobelt platform for nanotechnology,” Mater. Sci. Eng. Rep., vol. 64, no. 3, pp. 33–71, 2009.
[245]Das, S. and Ghosh, S., “Fabrication of different morphologies of ZnO superstructures in presence of synthesized ethylammonium nitrate (EAN) ionic liquid: synthesis, characterization and analysis,” Dalton. T., vol. 42, no. 5, pp. 1645–1656, 2013.
[246]Pan, Z. W., Dai, Z. R., and Wang, Z. L., “Nanobelts of semiconducting oxides,” Science, vol. 291, no. 5510, p. 1947, 2001.
[247]Park, W. I., Yi, G. C., Kim, M. Y., and Pennycook, S. J., “ZnO nanoneedles grown vertically on Si substrates by non-catalytic vapor-phase epitaxy,” Adv. Mater., vol. 14, no. 24, pp. 1841–1843, Dec 2002.
[248]Heo, Y. W., et al., “Site-specific growth of ZnO nanorods using catalysis-driven molecular-beam epitaxy,” Appl. Phys. Lett., vol. 81, no. 16, pp. 3046–3048, 2002.
[249]Hong, J. I., Bae, J., Wang, Z. L., and Snyder, R. L., “Room-temperature, texture-controlled growth of ZnO thin films and their application for growing aligned ZnO nanowire arrays,” Nanotechnology, vol. 20, no. 8, p. 5, Feb 2009.
[250]Laudise, R. A. and Ballman, A. A., “Hydrothermal synthesis of zinc oxide and zinc sulfide,” J. Phys. Chem., vol. 64, no. 5, pp. 688–691, 1960.
[251]Verges, M. A., Mifsud, A., and Serna, C. J., “Formation of rod-like zinc oxide microcrystals in homogeneous solutions,” J. Chem. Soc. Faraday. T., vol. 86, no. 6, pp. 959–963, 1990.
[252]Vayssieres, L., Keis, K., Lindquist, S.-E., and Hagfeldt, A., “Purpose-built anisotropic metal oxide material: 3D highly oriented microrod array of ZnO,” J. Phys. Chem. B, vol. 105, no. 17, pp. 3350–3352, 2001.
[253]Nayak, J., Sahu, S. N., Kasuya, J., and Nozaki, S., “Effect of substrate on the structure and optical properties of ZnO nanorods,” J. Phys. D. Appl. Phys., vol. 41, no. 11, p. 6, Jun 2008.
[254]Chang, P. C. and Lu, J. G., “ZnO nanowire field-effect transistors,” IEEE. T. Electron. Dev., vol. 55, no. 11, pp. 2977–2987, Nov 2008.
[255]Xu, S., et al., “Patterned growth of vertically aligned ZnO nanowire arrays on inorganic substrates at low temperature without catalyst,” J. Am. Chem. Soc., vol. 130, no. 45, pp. 14958–14959, 2008.
[256]Govender, K., Boyle, D. S., Kenway, P. B., and O’Brien, P., “Understanding the factors that govern the deposition and morphology of thin films of ZnO from aqueous solution,” J. Mater. Chem., vol. 14, no. 16, pp. 2575–2591, 2004.
[257]Ashfold, M. N. R., Doherty, R. P., Ndifor-Angwafor, N. G., Riley, D. J., and Sun, Y., “The kinetics of the hydrothermal growth of ZnO nanostructures,” Thin Solid Films, vol. 515, no. 24, pp. 8679–8683, Oct 2007.
[258]Sugunan, A., Warad, H. C., Boman, M., and Dutta, J., “Zinc oxide nanowires in chemical bath on seeded substrates: Role of hexamine,” J. Sol-Gel. Sci. Techn, vol. 39, no. 1, pp. 49–56, July 01 2006.
[259]Xu, S., Lao, C., Weintraub, B., and Wang, Z. L., “Density-controlled growth of aligned ZnO nanowire arrays by seedless chemical approach on smooth surfaces,” J. Mater. Res., vol. 23, no. 8, pp. 2072–2077, Aug 2008.
[260]Greene, L. E., et al., “Low-temperature wafer-scale production of ZnO nanowire arrays,” Angew. Chem. Int. Edit., vol. 42, no. 26, pp. 3031–3034, 2003.
[261]Park, H.-H., et al., “Position-controlled hydrothermal growth of ZnO nanorods on arbitrary substrates with a patterned seed layer via ultraviolet-assisted nanoimprint lithography,” Cryst. Eng. Comm., vol. 15, no. 17, pp. 3463–3469, 2013.
[262]Liu, J., She, J. C., Deng, S. Z., Chen, J., and Xu, N. S., “Ultrathin seed-layer for tuning density of ZnO nanowire arrays and their field emission characteristics,” J. Phys. Chem. B, vol. 112, no. 31, pp. 11685–11690, Aug 2008.
[263]Ma, T., Guo, M., Zhang, M., Zhang, Y. J., and Wang, X. D., “Density-controlled hydrothermal growth of well-aligned ZnO nanorod arrays,” Nanotechnology, vol. 18, no. 3, p. 7, Jan 2007.
[264]Le, H. Q., Chua, S. J., Loh, K. P., Fitzgerald, E. A., and Koh, Y. W., “Synthesis and optical properties of well aligned ZnO nanorods on GaN by hydrothermal synthesis,” Nanotechnology, vol. 17, no. 2, pp. 483–488, Jan 2006.
[265]Pauporté, T., Lincot, D., Viana, B., and Pellé, F., “Toward laser emission of epitaxial nanorod arrays of ZnO grown by electrodeposition,” Appl. Phys. Lett, vol. 89, no. 23, p. 233112, 2006.
[266]Law, M., Greene, L. E., Johnson, J. C., Saykally, R., and Yang, P., “Nanowire dye-sensitized solar cells,” Nat. Mater., vol. 4, p. 455, 2005.
[267]Xu, C., Shin, P., Cao, L., and Gao, D., “Preferential growth of long ZnO nanowire array and its application in dye-sensitized solar cells,” J. Phys. Chem. B, vol. 114, no. 1, pp. 125–129, 2010.
[268]Zhou, Y., Wu, W. B., Hu, G. D., Wu, H. T., and Cui, S. G., “Hydrothermal synthesis of ZnO nanorod arrays with the addition of polyethyleneimine,” Mater. Res. Bull., vol. 43, no. 8–9, pp. 2113–2118, 2008.
[269]Tian, Z. R., Voigt, J. A., Liu, J., McKenzie, B., and McDermott, M. J., “Biomimetic arrays of oriented helical ZnO nanorods and columns,” J. Am. Chem. Soc., vol. 124, no. 44, pp. 12954–12955, 2002.
[270]Xu, L., Guo, Y., Liao, Q., Zhang, J., and Xu, D., “Morphological control of ZnO nanostructures by electrodeposition,” J. Phys. Chem. B, vol. 109, no. 28, pp. 13519–13522, 2005.
[271]Tian, Z. R., et al., “Complex and oriented ZnO nanostructures,” Nat. Mater., vol. 2, p. 821, 2003.
[272]Ni, Y. H., Wei, X. W., Ma, X., and Hong, J. M., “CTAB assisted one-pot hydrothermal synthesis of columnar hexagonal-shaped ZnO crystals,” J. Cryst. Growth, vol. 283, no. 1–2, pp. 48–56, Sep 2005.
[273]Wang, Y. X., Fan, X. Y., and Sun, J., “Hydrothermal synthesis of phosphate-mediated ZnO nanosheets,” Mater. Lett., vol. 63, no. 3–4, pp. 350–352, 2009.
[274]Sun, Y., Wang, L., Yu, X., and Chen, K., “Facile synthesis of flower-like 3D ZnO superstructures via solution route,” Cryst. Eng. Comm., vol. 14, no.9, pp.3199–3204, 2012.
[275]Ko, S. H., et al., “Nanoforest of hydrothermally grown hierarchical ZnO nanowires for a high efficiency dye-sensitized solar cell,” Nano Lett., vol. 11, no.2, pp.666–671, 2011.
[276]Wanit, M., et al., “ZnO nano-tree growth study for high efficiency solar cell,” Energy Procedia, vol.14, pp.1093–1098, 2012.
[277]Zhang, T., Dong, W., Keeter-Brewer, M., Konar, S., Njabon, R. N., and Tian, Z. R., “Site-specific nucleation and growth kinetics in hierarchical nanosyntheses of branched ZnO crystallites,” J. Am. Chem. Soc., vol. 128, no. 33, pp. 10960–10968, 2006.
[278]Alenezi, M. R., “Nanostructured zinc oxide sensors,” Thesis (Ph.D.) – University of Surrey, 2014.
[279]Tian, J. H., et al., “Improved seedless hydrothermal synthesis of dense and ultralong ZnO nanowires,” Nanotechnology, vol. 22, no.24, p. 9, May 2011, Art. no. 245601.
[280]Lee, J. H., “Gas sensors using hierarchical and hollow oxide nanostructures: overview,” Sens. Actuator B-Chem., vol. 140, no. 1, pp. 319–336, Jun 2009.
[281]Chou, T. P., Zhang, Q. F., Fryxell, G. E., and Cao, G. Z., “Hierarchically structured ZnO film for dye-sensitized solar cells with enhanced energy conversion efficiency,” Adv. Mater., vol. 19, no. 18, Sep 2007.
[282]Cao, A. M., et al., “Hierarchically structured cobalt oxide (Co3O4): the morphology control and its potential in sensors,” J. Phys. Chem. B, vol. 110, no. 32, pp. 15858–15863, Aug 2006.
[283]Zhang, L., Wang, W., Chen, Z., Zhou, L., Xu, H., and Zhu, W., “Fabrication of flower-like Bi2WO6 superstructures as high performance visible-light driven photocatalysts,” J. Mater. Chem., vol. 17, no. 24, pp. 2526–2532, 2007.
[284]Xu, H., Zheng, Z., Zhang, L. Z., Zhang, H. L., and Deng, F., “Hierarchical chlorine-doped rutile TiO2 spherical clusters of nanorods: large-scale synthesis and high photocatalytic activity,” J. Solid State Chem., vol. 181, no. 9, pp. 2516–2522, Sep 2008.
[285]Sun, S., Wang, W., Xu, H., Zhou, L., Shang, M., and Zhang, L., “Bi5FeTi3O15 hierarchical microflowers: hydrothermal synthesis, growth mechanism, and associated visible-light-driven photocatalysis,” J. Phys. Chem. B, vol. 112, no. 46, pp. 17835–17843, 2008.
[286]Qin, Y., Wang, X., and Wang, Z. L., “Microfibre–nanowire hybrid structure for energy scavenging,” Nature, vol. 451, p. 809, 2008.
[287]Yang, H., Hao, L., Zhao, N., Du, C., and Wang, Y., “Hierarchical porous hydroxyapatite microsphere as drug delivery carrier,” Cryst. Eng. Comm., vol. 15, no. 29, pp. 5760–5763, 2013.
[288]Zhang, Y., Xu, J., Xiang, Q., Li, H., Pan, Q., and Xu, P., “Brush-like hierarchical ZnO nanostructures: synthesis, photoluminescence and gas sensor properties,” J. Phys. Chem. B, vol. 113, no. 9, pp. 3430–3435, 2009.
[289]Wen, J. G., Lao, J. Y., Wang, D. Z., Kyaw, T. M., Foo, Y. L., and Ren, Z. F., “Self-assembly of semiconducting oxide nanowires, nanorods, and nanoribbons,” Chem. Phys. Lett., vol. 372, no. 5, pp. 717–722, 2003.
[290]Liu, B. and Zeng, H. C., “Hollow ZnO microspheres with complex nanobuilding units,” Chem. Mater., vol. 19, no. 24, pp. 5824–5826, 2007.
[291]Gao, P. X. and Wang, Z. L., “Nanopropeller arrays of zinc oxide,” Appl. Phys. Lett., vol. 84, no. 15, pp. 2883–2885, 2004.
[292]Baca, A. J., et al., “Semiconductor wires and ribbons for high‐performance flexible electronics,” Angew. Chem. Int. Edit., vol. 47, no. 30, pp.5524–5542, 2008.