Book contents
- Frontmatter
- Contents
- Preface
- 1 Introduction
- 2 Selected Basic Flows and Forces
- Part I Collision of Liquid Jets and Drops with a Dry Solid Wall
- 3 Jet Impact onto a Solid Wall
- 4 Drop Impact onto a Dry Solid Wall
- 5 Drop Impact onto Dry Surfaces with Complex Morphology
- Part II Drop Impacts onto Liquid Surfaces
- Part III Spray Formation and Impact onto Surfaces
- Part IV Collisions of Solid Bodies with Liquid
- Part V Solid–Solid Collisions
- Index
- References
3 - Jet Impact onto a Solid Wall
from Part I - Collision of Liquid Jets and Drops with a Dry Solid Wall
Published online by Cambridge University Press: 13 July 2017
Book contents
- Frontmatter
- Contents
- Preface
- 1 Introduction
- 2 Selected Basic Flows and Forces
- Part I Collision of Liquid Jets and Drops with a Dry Solid Wall
- 3 Jet Impact onto a Solid Wall
- 4 Drop Impact onto a Dry Solid Wall
- 5 Drop Impact onto Dry Surfaces with Complex Morphology
- Part II Drop Impacts onto Liquid Surfaces
- Part III Spray Formation and Impact onto Surfaces
- Part IV Collisions of Solid Bodies with Liquid
- Part V Solid–Solid Collisions
- Index
- References
Summary
A summary is not available for this content so a preview has been provided. Please use the Get access link above for information on how to access this content.
- Type
- Chapter
- Information
- Collision Phenomena in Liquids and Solids , pp. 87 - 99Publisher: Cambridge University PressPrint publication year: 2017
References
(1957). Flow past a circular cylinder with a detached shock wave, Dokl. Akad. Nauk
113: 509–512.Google Scholar
and (1957). Jets, Wakes, and Cavities, Academic Press, New York.
(1978). Étalement en couche mince d'un jet liquide cylindrique vertical sur un plan horizontal, Z. Angew. Math. Phys.
29: 157–167.Google Scholar
(1972). The impact of an axisymmetric jet onto a normal ground, Aeronaut. Quart.
23: 141–147.Google Scholar
and (1969). The penetration of rock by high-speed water jets, Int. J. Rock Mech. Min. Sci.
6: 249–258.Google Scholar
and (2003). The influence of surface tension on the circular hydraulic jump, J. Fluid Mech.
489: 229–238.Google Scholar
, and (1977). Characterization of the impingement region in an axisymmetric turbulent jet, Ind. Eng. Chem. Fundam.
16: 21–28.Google Scholar
(1966). Theory of Jets in Ideal Fluids, Pergamon Press, Oxford.
(1974). Applied and Computational Complex Analysis, Vol. 3, John Wiley & Sons, New York.
, , and (1977). Heat transfer of the impinging round water jet in the interference zone of film flow along the wall, Bull. JSME
20: 85–92.Google Scholar
, and (1964). Theoretical Hydrodynamics, Interscience Publishers, New York.
(1959). Hydrodynamics, Cambridge University Press.
, , , and (1966). Some aspects of rock cutting by high speed water jets [and discussion], Philos. Trans. R. Soc. Lond. Ser. A-Math.
260: 295–310.Google Scholar
and (1993). The hydraulic jump in circular jet impingement and in other thin liquid films, Exp. Fluids
15: 108–116.Google Scholar
and (2002). An experimental study to corelate water jet impingement erosion resistance and properties of metallic materials and coatings, Wear
253: 650–661.Google Scholar
, , and (2006). Maximum heat flux in relation to quenching of a high temperature surface with liquid jet impingement, Int. J. of Heat Mass Transf.
49: 2877–2888.Google Scholar
(2001). Assessment of high-heat-flux thermal management schemes, IEEE Trans. Compon. Packaging Technol.
24: 122–141.Google Scholar
, and (1978). Impingement of an axisymmetric liquid jet on a barrier, Int. J. Heat Mass Transf.
21: 1175–1184.Google Scholar
and (1966). Radial spread of a liquid stream on a horizontal plate, Nature
211: 813–816.Google Scholar
and (2006). Electronic cooling using synthetic jet impingement, J. Heat Transf.-Trans. ASME
128: 897–907.Google Scholar
, and (2000). The inviscid impingement of a jet with arbitrary velocity profile, Phys. Fluids
12: 2046–2055.Google Scholar
, , and (1995). Atomization characteristics of impinging liquid jets, J. Propul. Power
11: 135–145.Google Scholar
(1974). An approximate solution of the steady jet impact problem, Z. Angew. Math. Phys.
25: 515–531.Google Scholar
, , and (2004). Fluid flow and heat transfer in air jet impingement in food processing, J. Food Sci.
69: CRH113–CRH122.Google Scholar
and (1970). Mass transfer in a nonuniform impinging jet: Part I. Stagnation flow-velocity and pressure distribution, AIChE J.
16: 82–90.Google Scholar
(1966). Oblique impact of a jet on a plane surface, Philos. Trans. R. Soc. Lond. Ser. A-Math.
260: 96–100.Google Scholar
(1964). The radial spread of a liquid jet over a horizontal plane, J. Fluid Mech.
20: 481–499.Google Scholar