Crossref Citations
This Book has been
cited by the following publications. This list is generated based on data provided by Crossref.
Vijayaraghavan, Athulan
and
Dornfeld, David
2008.
Subdivision surfaces for procedural design of imprint rolls.
p.
327.
Panda, S. K.
Kuntz, M. L.
and
Zhou, Y.
2009.
Finite element analysis of effects of soft zones on formability of laser welded advanced high strength steels.
Science and Technology of Welding and Joining,
Vol. 14,
Issue. 1,
p.
52.
Lim, Yongseob
Venugopal, Ravinder
and
Ulsoy, A. Galip
2009.
Improved part quality in stamping using Multi-Input Multi-Output (MIMO) process control.
p.
5570.
Shivpuri, Rajiv
2009.
Fundamentals of Modeling for Metals Processing.
p.
23.
2010.
Solid Mechanics.
p.
130.
2010.
Solid Mechanics.
p.
84.
Chen, L.
Kim, J.‐K.
Kim, S.‐K.
Kim, G.‐S.
Chin, K.‐G.
and
De Cooman, B.C.
2010.
Stretch‐Flangeability of High Mn TWIP steel.
steel research international,
Vol. 81,
Issue. 7,
p.
552.
Gutiérrez, David
Lara, A.
Casellas, Daniel
and
Prado, Jose Manuel
2010.
Effect of Strain Paths on Formability Evaluation of TRIP Steels.
Advanced Materials Research,
Vol. 89-91,
Issue. ,
p.
214.
2010.
Solid Mechanics.
p.
224.
2010.
Solid Mechanics.
p.
67.
Steglich, Dirk
Brocks, Wolfgang
Bohlen, Jan
and
Barlat, Frederic
2011.
Modelling direction-dependent hardening in magnesium sheet forming simulations.
International Journal of Material Forming,
Vol. 4,
Issue. 2,
p.
243.
Kang, Jidong
Wilkinson, David S.
and
Mishra, Raja K.
2011.
Magnesium Technology 2011.
p.
307.
Paralikas, John
Salonitis, Konstantinos
and
Chryssolouris, George
2011.
Investigation of the effect of roll forming pass design on main redundant deformations on profiles from AHSS.
The International Journal of Advanced Manufacturing Technology,
Vol. 56,
Issue. 5-8,
p.
475.
Lee, Kye-Man
Huh, Moo-Young
Park, Sooho
and
Engler, Olaf
2012.
Effect of Texture Components on the Lankford Parameters in Ferritic Stainless Steel Sheets.
ISIJ International,
Vol. 52,
Issue. 3,
p.
522.
Abbasi, M.
Ketabchi, M.
Shakeri, H. R.
and
Hasannia, M. H.
2012.
Formability Enhancement of Galvanized IF-Steel TWB by Modification of Forming Parameters.
Journal of Materials Engineering and Performance,
Vol. 21,
Issue. 4,
p.
564.
Abbasi, Mahmoud
Shafaat, Mohammad A.
Ketabchi, Mostafa
Haghshenas, Davoud F.
and
Abbasi, Mohammad
2012.
Application of the GTN model to predict the forming limit diagram of IF-Steel.
Journal of Mechanical Science and Technology,
Vol. 26,
Issue. 2,
p.
345.
Guo, Lili
and
Fujita, Fumio
2012.
Effect of equivalent strain and redundant shear strain on microstructure and texture evolution during hot rolling in Mg–3Al–1Zn alloys.
Journal of Materials Science,
Vol. 47,
Issue. 17,
p.
6213.
Nurcheshmeh, Morteza
and
Green, Daniel E.
2012.
Influence of out-of-plane compression stress on limit strains in sheet metals.
International Journal of Material Forming,
Vol. 5,
Issue. 3,
p.
213.
Riahi, M
Amini, A
Sabbaghzadeh, J
and
Torkamany, M J
2012.
Analysis of weld location effect and thickness ratio on formability of tailor welded blank.
Science and Technology of Welding and Joining,
Vol. 17,
Issue. 4,
p.
282.
Selles, M. A.
Schmid, S. R.
Sanchez-Caballero, S.
Perez-Bernabeu, E.
and
Reig, M. J.
2012.
Upper-bound modelization of an ironed three-layered polymer-coated steel strip.
The International Journal of Advanced Manufacturing Technology,
Vol. 60,
Issue. 1-4,
p.
161.