Adamczyk, J. J., and Goldstein, M. E., 1978, “Unsteady Flow in Supersonic Cascade with Subsonic Leading-Edge Locus,” AIAA Journal, Vol. 16, No. 12, December, pp. 1248–1254.Google Scholar

Allemang, R. J., 2003, “Modal Assurance Criterion – Twenty Years of Use and Abuse,” Sound and Vibration, August, pp. 14–21.Google Scholar

Allen, P. B., and Kelnar, J., 1998, “Evolution of a Vibrational Wave Packet on a Disordered Chain,” American Journal of Physics, Vol. 66, No. 6, pp. 497–506.Google Scholar

Anderson, P. W., 1958, “Absence of Diffusion in Certain Random Lattices,” Physical Review, Vol. 109, No. 5, pp. 1492–1505.Google Scholar

Andrew, A. L., and Tan, R. C. E., 1998, “Computation of Derivatives of Repeated Eigenvalues and the Corresponding Eigenvectors of Symmetric Matrix Pencils,” SIAM Journal of Matrix Analysis and Applications, Vol. 20, No. 1, pp. 78–100.Google Scholar

ANSYS Theory Manual, 2012, 12th ed., pp. 15–65 to 15–66.Google Scholar

Beck, J. A., 2010, “Stochastic Mistuning Simulation of Integrally Bladed Rotors Using Nominal and Non-nominal Component Mode Synthesis,” MS Thesis, Wright State University, Dayton, OH.Google Scholar

Bhartiya, Y., and Sinha, A., 2011, “Reduced Order Model of a Bladed Rotor with Geometric Mistuning: Comparison between Modified Modal Domain Analysis and Frequency Mistuning Approach,” GT2011-45391, presented at the ASME Turbo Expo, Vancouver, BC, Canada, June 6–11.Google Scholar

Bhartiya, Y., and Sinha, A., 2012, “Reduced Order Model of a Multistage Bladed Rotor with Geometric Mistuning via Modal Analyses of Finite Element Sectors,” ASME Journal of Turbomachinery, Vol. 134, July, pp. 041001-1 to 041001-8.Google Scholar

Bhartiya, Y., and Sinha, A., 2013a, “Reduced Order Model of a Bladed Rotor with Geometric Mistuning via Estimated Deviations in Mass and Stiffness Matrices,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 135, May, pp. 052501-1 to 052501-8.Google Scholar

Bhartiya, Y., and Sinha, A., 2013b, “Reduced Order Modeling of a Bladed Rotor with Geometric Mistuning: Alternative Bases and Extremely Large Mistuning,” International Journal of Gas Turbine, Propulsion and Power System, Vol. 5, No. 1, pp. 1–7.Google Scholar

Bhartiya, Y., and Sinha, A., 2014, “Geometric Mistuning Identification of Integrally Bladed Rotors Using Modified Modal Domain Analysis,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 136, December, pp. 122504-1 to 122504-8.Google Scholar

Bladh, R., Castanier, M. P., and Pierre, C., 2001, “Component-Mode-Based Reduced Order Modeling Techniques for Mistuned Bladed Disks – Part I: Theoretical Models, Part II: Application,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 123, January, pp. 89–108.Google Scholar

Bladh, R., Castanier, M. P., and Pierre, C., 2003, “Effects of Multistage Coupling and Disk Flexibility on Mistuned Bladed Disk Dynamics,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 125, pp. 121–130.Google Scholar

Brown, J. M., 2008, ‘‘Reduced Order Modeling Methods for Turbomachinery Design,” PhD Dissertation, Wright State University, Dayton, OH.Google Scholar

Castanier, M. P., and Pierre, C., 1997, “Consideration on the Benefits of Intentional Blade Mistuning for the Forced Response of Turbomachinery Rotors,” Proceedings of the ASME Aerospace Division, AD – 55, pp. 419–425.Google Scholar

Chan, Y.-J., and Ewins, D. J., 2011, “The Amplification of Vibration Response Levels of Mistuned Bladed Disks: Its Consequences and Its Distribution in Specific Situations,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 133, October, 102502-1 to 102502-8.Google Scholar

Chen, G., 2005, Nanoscale Energy Transport and Conversion, Oxford: Oxford University Press.Google Scholar

Choi, B-K., Lentz, J., Rivas-Guerra, A., and Mignolet, M. P., 2003, “Optimization of Intentional Mistuning Patterns for the Reduction of the Forced Response Effects of Unintentional Mistuning: Formulation and Assessment,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 125, pp. 131–140.Google Scholar

Cleland, A. N., 2003, Foundations of Nanomechanics, Berlin: Springer-Verlag.Google Scholar

Craig, R. R., 1981, Structural Dynamics: An Introduction to Computer Methods, New York: John Wiley and Sons.Google Scholar

Crawley, E. F., and Hall, K. C., 1985, “Optimization and Mechanisms of Mistuning in Cascades,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 107, April, pp. 418–426.Google Scholar

D’Amato, F., and Rotea, M., 2005, “LFTB: An Efficient Algorithm to Bound Linear Fractional Transformations,” Optimization and Engineering, Vol. 6, pp. 177–201.Google Scholar

Dowell, E. H., 2014 , A Modern Course in Aeroelasticity, Berlin: Springer.Google Scholar

Ewins, D. J., 1969, “The Effects of Detuning upon the Forced Vibrations of Bladed Disks,” Journal of Sound and Vibration, Vol. 9, No. 1, pp. 65–79.Google Scholar

Fan, M., Tits, A., and Doyle, J. C., 1991, “Robustness in the Presence of Joint Parametric Uncertainty and Unmodeled Dynamics,” Vol. 36, No. 1, pp. 25–38.Google Scholar

Feiner, D. M., and Griffin, J. H., 2002, “A Fundamental Model of Mistuning for a Single Family of Modes,” ASME Journal of Turbomachinery, Vol. 124, No. 4, pp. 597–605.Google Scholar

Feiner, D.M., and Griffin, J. H., 2004a, “Mistuning Identification of Bladed Disks Using a Fundamental Mistuning Model – Part 1: Theory,” ASME Journal of Turbomachinery, Vol. 126, No. 1, pp. 150–158.Google Scholar

Feiner, D.M., and Griffin, J. H., 2004b, “Mistuning Identification of Bladed Disks Using a Fundamental Mistuning Model – Part 2: Application,” ASME Journal of Turbomachinery, Vol. 126, No. 1, pp. 159–165.Google Scholar

Fox, R. L., and Kapoor, M. P., 1968, “Rates of Change of Eigenvalues and Eigenvectors,” AIAA Journal, Vol. 6, No. 12, pp. 2426–2429.Google Scholar

Ghanem, R. G., and Spanos, P. D., 1990, Stochastic Finite Elements: A Spectral Approach, New York: Springer-Verlag.Google Scholar

Jones, K., 2004, “Mistuning for Minimum Maximum Bladed Disk Forced Response,” AIAA 2004–3755, 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Fort Lauderdale, FL, July.Google Scholar

Jones, K., and Cross, C., 2003, “On Antiresonance in the Forced Response of Mistuned Bladed Disks,” Shock and Vibration, Vol. 10, pp. 135–146.Google Scholar

Kaza, K. R. V., and Kielb, R. E., 1982, “Flutter and Response of a Mistuned Cascade in Incompressible Flow,” AIAA Journal, Vol. 20, No. 8, August, pp. 1120–1127.Google Scholar

Kenyon, J. A., and Griffin, J. H., 2003, “Experimental Demonstration of Maximum Mistuned Bladed Disk Forced Response,” ASME Journal of Turbomachinery, Vol. 125, October, pp. 673–681.Google Scholar

Kenyon, J. A., Griffin, J. H., and Feiner, D. M., 2003, “Maximum Bladed Disk Forced Response from Distortion of a Structural Mode,” ASME Journal of Turbomachinery, Vol. 125, April, pp. 353–363.Google Scholar

Kenyon, J. A., Griffin, J. H., and Kim, N. E., 2005, “Sensitivity of Tuned Bladed Disk Response to Frequency Veering,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 127, October, pp. 835–842.Google Scholar

Kielb, R. E., and Kaza, K. R.V., 1983, “Aeroelastic Characteristics of a Cascade of Mistuned Blades in Subsonic and Supersonic Flows,” ASME Journal of Vibration, Acoustics, Stress, and Reliability in Design, Vol. 105, pp. 425–433.Google Scholar

Kittel, C., 1996, Introduction to Solid State Physics, 7th ed., New York: John Wiley and Sons.Google Scholar

Laxalde, D., Thouverez, F., and Lombard, J.-P., 2007, “Dynamical Analysis of Multi-Stage Cyclic Structures,” Mechanics Research Communication, Vol. 34, pp. 379–384.Google Scholar

Lim, S. H., Pierre, C., and Castanier, M.P., 2004, “Mistuning Identification and Reduced-Order Model Updating for Bladed Disks on a Component Mode Mistuning Technique,” 9th National Turbine Engine High Cycle Fatigue Conference, Pinehurst, North Carolina.Google Scholar

MATLAB, 1992, “MATLAB Reference Guide,” The MathWorks, Inc., Natick, MA.Google Scholar

Mignolet, M. P., and Lin, C.-C., 1993, “The Combined Closed-Form Perturbation Approach to the Analysis of Mistuned Bladed Disks,” ASME Journal of Turbomachinery, Vol. 115, October, pp. 771–780.Google Scholar

Mignolet, M. P., Delor, J. P., and Rivas-Guerra, A., 1999a, “Identification of Mistuning Characteristics of Bladed Disks from Free Response Data – Part I,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 123, pp. 395–403.Google Scholar

Mignolet, M. P., Delor, J. P., and Rivas-Guerra, A., 1999b, “Identification of Mistuning Characteristics of Bladed Disks from Free Response Data – Part II,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 123, pp. 404–411.Google Scholar

Mignolet, M. P., Hu, W., and Jadic, I., 2000, “On the Forced Response of Harmonically and Partially Mistuned Bladed Disks, Part I: Harmonic Mistuning, Part II: Partial Mistuning and Applications,” International Journal of Rotating Machinery, Vol. 6, pp. 29–56.Google Scholar

Mignolet, M. P., Rivas-Guerra, A., and LaBorde, B., 1999, “Towards a Comprehensive Direct Prediction Strategy of the Effects of Mistuning on the Forced Response of Turbomachinery Blades,” Aircraft Engineering and Aerospace Technology, Vol. 71, No. 5, pp. 462–469.Google Scholar

Nelson, R. B., 1976, “Simplified Calculation of Eigenvector Derivatives,” AIAA Journal, Vol. 14, pp. 1201–1205.Google Scholar

Oppenheim, A. V., and Shaeffer, R. W., 1975, Digital Signal Processing, Englewood Cliffs, NJ: Prentice-Hall.Google Scholar

Papoulis, A., 1965, Probability, Random Variables, and Stochastic Processes, New York: McGraw-Hill.Google Scholar

Petrov, E. P., and Ewins, D. J., 2003, “Analysis of the Worst Mistuning Patterns in Bladed Disk Assemblies,” ASME Journal of Turbomachinery, Vol. 125, October, pp. 623–631.Google Scholar

Phani, A. S., Woodhouse, J., and Fleck, N. A., 2006, “Wave Propagation in Two-Dimensional Periodic Lattices,” Journal of Acoustical Society of America, Vol. 119, No. 4, pp. 1995–2005.Google Scholar

Prescott, J., 1946, Applied Elasticity, New York: Dover Publications.Google Scholar

Rao, J. S., 1991, Turbomachine Blade Vibration, New York: John Wiley and Sons.Google Scholar

Rivas-Guerra, A. J., and Mignolet, M. P., 2003, “Maximum Amplification of Blade Response Due to Mistuning: Localization and Mode Shape Aspects of the Worst Disks,” ASME Journal of Turbomachinery, Vol. 125, July, pp. 442–454.Google Scholar

Rotea, M., and D’ Amato, F., 2002, “New Tools for Analysis and Optimization of Mistuned Bladed Disks,” AIAA 2002 – 4081, Proceedings of the 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, July, Indianapolis, IN.Google Scholar

Shapiro, B., 1998, “Symmetry Approach to Extension of Flutter Boundaries via Mistuning,” AIAA Journal of Propulsion and Power, Vol. 14, No. 3, pp. 354–366.Google Scholar

Shapiro, B., 1999, “Solving for Mistuned Forced Response by Symmetry,” AIAA Journal of Propulsion and Power, Vol. 15, No. 2, pp. 310–325.Google Scholar

Sinha, A., 1986, “Calculating the Statistics of Forced Response of a Mistuned Bladed Disk Assembly,” AIAA Journal, Vol. 24, No. 11, pp. 1797–1801.Google Scholar

Sinha, A., 1997, “Computing the Maximum Amplitude of a Mistuned Bladed Disk Assembly via Infinity Norm,” Proceedings of the ASME Aerospace Division, AD – 55, pp. 427–432.Google Scholar

Sinha, A., 2005, “Statistical Distribution of the Peak Maximum Amplitude of the Forced Response of a Mistuned Bladed Disk,” GT2005 – 69070, ASME Turbo Expo, Reno-Tahoe, NV.Google Scholar

Sinha, A., 2006a, “Computation of Eigenvalues and Eigenvectors a Mistuned Bladed Disk,” GT2006 – 90087, ASME Turbo Expo, Barcelona, Spain.Google Scholar

Sinha, A., 2006b, “Statistical Distribution of the Peak Maximum Amplitude of the Forced Response of a Mistuned Bladed Disk: Some Investigations and Applications of Neural Networks,” GT2006 – 90088, ASME Turbo Expo, Barcelona, Spain.Google Scholar

Sinha, A., 2006c, “Computation of the Statistics of Forced Response of a Mistuned Bladed Disk Assembly via Polynomial Chaos,” ASME Journal of Vibration and Acoustics, Vol. 128, August, pp. 449–457.Google Scholar

Sinha, A., 2007, Linear Systems: Optimal and Robust Control, Boca Raton, FL: CRC Press (Taylor Francis Group).Google Scholar

Sinha, A., 2008a, “Mistuning Analyses of a Bladed Disk: Pole-Zero and Modal Approaches,” GT2008 – 50191, ASME Turbo Expo, Berlin, Germany.Google Scholar

Sinha, A. 2008b, “Reduced-Order Model of a Mistuned Multi-Stage Bladed Rotor,” International Journal of Turbo and Jet Engines, Vol. 25, pp. 145–153 (also, ASME GT 2007 – 27277).Google Scholar

Sinha, A., 2009, “Reduced-Order Model of a Bladed Rotor with Geometric Mistuning,” ASME Journal of Turbomachinery , Vol. 131, 031007-1-7, July.Google Scholar

Sinha, A., 2010, Vibration of Mechanical Systems, New York: Cambridge University Press.Google Scholar

Sinha, A., and Bhartiya, Y., 2010, “Modeling Geometric Mistuning of a Bladed Rotor: Modified Modal Domain Analysis,” IUTAM Symposium on Emerging Trends in Rotor Dynamics, Gupta, K. (ed.), IUTAM Book Series, New York: Springer, pp. 177–184.Google Scholar

Sinha, A., and Chen, S., 1989, “A Higher-Order Technique to Compute the Statistics of Forced Response of a Mistuned Bladed Disk,” Journal of Sound and Vibration, Vol. 130, pp. 207–221.Google Scholar

Sinha, A., Hall, B., Cassenti, B., and Hilbert, G., 2008, “Vibratory Parameters of Blades from Coordinate Measurement Machine Data,” ASME Journal of Turbomachinery, Vol. 130, January, pp. 011013-1 to 011013-8 (also, ASME GT 2005 – 69004).Google Scholar

Song, S. H., Castanier, M. P., and Pierre, C., 2005, “Multi-Stage Modeling of Turbine Engine Rotor Vibration,” DETC 2005 – 85740, Proceedings of IDETC/CIE 2005, ASME 2005 International Design Engineering Technical Conference, Long Beach, CA, September, pp. 1533–1543.Google Scholar

Statistics Toolbox for use with MATLAB, 2002, Natick, MA: The MathWorks, Inc.Google Scholar

Sternchuss, A., and Balmes, E., 2007, “Reduction of Multistage Rotor Using Cyclic Modeshapes,” GT2007-27974, Proceedings of ASME Turbo Expo, Montreal, Canada.Google Scholar

Strang, G., 1988, Linear Algebra and Its Applications, 3rd ed., San Diego, CA: Harcourt Brace Jovanovich Publishers.Google Scholar

Tao, T., 2013, Private Communications, https://www.math.ucla.edu/~tao/.Google Scholar

Thompson, E. A., and Becus, G. A., 1993, “Optimization of Blade Arrangement in a Randomly Mistuned Cascade Using Simulated Annealing,” AIAA 93 – 2254, Proceedings of AIAA/SAE/ASME/ASEE 29th Joint Propulsion Conference and Exhibit, Monterey, CA.Google Scholar

Vidyasagar, M., 1993, Nonlinear Systems Analysis, New Jersey: Prentice-Hall.Google Scholar

Vishwakarma, V., and Sinha, A., 2015, “Forced Response Statistics of a Bladed Rotor with Geometric Mistuning,” AIAA Journal, Vol. 53, No. 9, pp. 2776–2781.Google Scholar

Vishwakarma, V., Sinha, A., Bhartiya, Y., and Brown, J.M., 2015, “Modified Modal Domain Analysis of a Bladed Rotor Using Coordinate Measurement Machine Data,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 137, No. 4, pp. 042502-1 to 042502-8.Google Scholar

Wagner, J. T., 1967, “Coupling of Turbomachine Blade Vibration through the Rotor,” ASME Journal of Engineering for Power, Vol. 89, No. 4, October, pp. 502–512.Google Scholar

Wei, S.-T., and Pierre, C., 1988, “Localization Phenomena in Mistuned Assemblies with Cyclic Symmetry, Part I: Free Vibration,” ASME Journal of Vibration, Acoustics, Stress, and Reliability in Design, Vol. 110, pp. 429–438.Google Scholar

Weiner, N., 1958, Nonlinear Problems in Random Theory, Cambridge, MA: MIT Press.Google Scholar

Weisstein, E. W., 2006, “Gram-Schmidt Orthonormalization,” MathWorld – A Wolfram Web Resource, http://mathworld.wolfram.com/Gram-SchmidtOrthonormalization.Html.Google Scholar

Whitehead, D. S., 1960, “Force and Moment Coefficients for Vibrating Airfoils in Cascade,” R. & M. No. 3254, Aeronautical Research Council Report and Memoranda, London, England.Google Scholar

Whitehead, D. S., 1966, “Effects of Mistuning on the Vibration of Turbomachine Blades Induced by Wakes,” Journal of Mechanical Engineering Science, Vol. 8, No. 1, pp. 15–21.Google Scholar

Whitehead, D. S., 1998, “The Maximum Factor by Which Forced Vibration of Blades Can Increase Due to Mistuning,” ASME Journal of Engineering for Gas Turbine and Power, Vol. 120, No. 1, pp. 115–119.Google Scholar

Xiangjun, Q., and Shijing, Z., 1986, “A Development of Eigenvalue Perturbation Method for Linear Discrete Systems,” Proceedings of the 4th International Modal Analysis Conference, Los Angeles, CA, Vol. 1, pp. 556–562.Google Scholar

Xiao, B., Rivas-Guerra, A. J., and Mignolet, M. P., 2004, “Maximum Amplification of Blade Response Due to Mistuning in Multi-Degree-of-Freedom Blade Models,” GT2004-54030, Proceedings of ASME Turbo Expo, Vienna, Austria.Google Scholar

Yang, M.-T., and Griffin, J. H., 1999, “A Reduced Order Model of Mistuning Using a Subset of Nominal System Modes,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 123, No. 4, pp. 893–900.Google Scholar

Yao, J., Wang, J., and Li, Q., 2009, “Robustness Analysis of Mistuned Bladed Disk Using the Upper Band of Structured Singular Value,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 131, pp. 032501-1 to 032501-7.Google Scholar

Zhang, Y.-Q., and Wang, W.-L., 1995, “Eigenvector Derivatives of Generalized Nondefective Eigenproblems with Repeated Eigenvalues,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 117, pp. 207–212.Google Scholar