Hostname: page-component-78c5997874-m6dg7 Total loading time: 0 Render date: 2024-11-04T18:38:27.720Z Has data issue: false hasContentIssue false
  • English
  • Français

The 1-4-1 system of jack movements for the flexible liners of supersonic wind tunnels

Published online by Cambridge University Press:  04 July 2016

A. C. McIntosh  and
J. Pike
Get access Rights & Permissions [Opens in a new window]

Extract

A method of improving the flow angle and Mach number distribution of a flexible-plate supersonic wind tunnel by small movements of the top and bottom liners has been known for a number of years. Once the influence on the flow, at a given Mach number, of small displacements of jacks supporting the liners are known, jack movements can be used to reduce non-uniformities in the working section flow. Such a procedure is being studied for adjusting the flow in the 8 ft x 8 ft Supersonic Wind Tunnel at RAE Bedford. However, one of the main difficulties encountered has been that of accurately determining the influence of each jack. The extended rippling in the plate which results from a displacement of a single jack generates a Mach number disturbance which is difficult to trace. This is particularly true at lower Mach numbers (i.e. near M=l.4) where the reflection of the disturbance from the opposite wall is observed to combine with the ‘tail’ of the direct effect, thereby causing interference effects in the data. Even with a 9-tube pitot rake spanning the tunnel it is difficult to ascertain which part of the disturbance is coming from the top of the tunnel and which part from the bottom. Ways have therefore been considered of moving the plate in the region of a particular jack in such a manner that the resulting waveform is shorter and more readily traced. A simple but effective system of jack movement has been derived and is described here as the 1-4-1 system.

Type
Technical Notes
Information
The Aeronautical Journal , Volume 83 , Issue 817 , January 1979 , pp. 28 - 31
Copyright
Copyright © Royal Aeronautical Society 1979 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

*

Formerly RAE, Bedford, now College of Aeronautics, CIT, Cranfield.

†

J. Pike, RAE, Bedford.

References

1. Macdermott, W. N. The correction of flexible plate supersonic nozzle contours by influence methods. J. Aero. Sci., 22, No 5, 289–296, 1955.Google Scholar
2. Roark, R. J. Formulas for stress and strain, 4th Ed., pp 106–108, New York, McGraw-Hill, 1965.Google Scholar
3. Thompson, J. S. Simple formulae for a uniform beam deflected by jacks. RAE Technical Memorandum Aero 173, 1951.Google Scholar
4. McIntosh, A. C., Ormerod, A. O. and PIKE, J., A calibration at supersonic speeds of the 8 ft X 8 ft wind tunnel and a new method for improving the flow by adjusting the flexible plates. RAE Technical Report Aero 3426, to be published.Google Scholar