Hostname: page-component-586b7cd67f-l7hp2 Total loading time: 0 Render date: 2024-11-21T06:25:12.893Z Has data issue: false hasContentIssue false
  • English
  • Français

Buckling of waffle cylinders

Published online by Cambridge University Press:  04 July 2016

R. Karmakar
R. Karmakar*
Affiliation:
Department of Aeronautical Engineering, Indian Institute of Technology, Kharagpur, India
Get access Rights & Permissions [Opens in a new window]

Extract

There is a growing interest in the analysis and design of waffle cylinders because of the advantages of integrally stiffened shell wall construction. The usual approach to the stability analysis of a stiffened shell has been to replace it by an equivalent orthotropic shell. The eccentricity of the stiffener has a large effect on the critical load in cylindrical shells, and outside stiffening has been found to be stronger than inside stiffening. Inversion of the stiffener eccentricity effect has been observed in cylinders under hydrostatic pressure loading. Naturally, regardless of whether the stiffened cylinder is considered as an orthotropic continuum or a composite of discrete elements, the treatment cannot be complete if it fails to include the coupling between bending and extensional forces and deformations resulting from one-sidedness of the stiffeners.

Type
Technical Notes
Information
The Aeronautical Journal , Volume 83 , Issue 823 , July 1979 , pp. 274 - 278
Copyright
Copyright © Royal Aeronautical Society 1979 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Legg, K. L. C. Integral construction, a survey and an experiment. Journal of RAeS, Vol 58, pp 485–504, 1954.Google Scholar
2. Van Der Neut, A. General instability of stiffened cylin drical shells under axial compression. National Luchtvaart Laboratorium, Amsterdam, Report No S-314, 1947.Google Scholar
3. Houghten, D. S. and Chan, A. S. L. Design of a pres surised missile body. Aircraft Engineering, Vol 32, No 38, November 1960.Google Scholar
4. Baruch, M. and Singer, J. Effects of eccentricity of stiffeners on the general instability of stiffened cylindrical shells under hydrostatic pressure. Journal of Mech Engg Sci, Vol 5, pp 23–27, 1963.Google Scholar
5. McElman, J. A., Mikulas, M. M. and Stein, M. Static and dynamic effects of eccentric stiffening of plates and cylindrical shells. AIAA Journal, Vol 4, pp 887–894, May 1966.Google Scholar
6. Singer, J., Baruch, M. and Harari, O. Inversion of the eccentricity effect in stiffened cylindrical shells buckling under hydrostatic pressure. Journal of Mech Engg Sci, Vol 8, pp 363–373, 1966.Google Scholar
7. Flügge, W. Stresses in shells. Springer-Verlag, pp 295–307, 1960.Google Scholar
8. Hedgepeth, J. M. and Hall, D. B. Stability of stiffened cylinders. AIAA Journal, Vol 3, pp 2275–2286, 1965.Google Scholar
9. Meyer, R. R. Buckling of 45° eccentric-stiffened waffle cylinders. Journal of RAeS, Vol 71, pp 516–520, July 1967.Google Scholar
10. Soong, T. C. Buckling of cylindrical shells with eccentric spiral type stiffeners. AIAA Journal, Vol 7, pp 65–72, January 1972.Google Scholar
11. Wang, C. T. Applied elasticity. McGraw-Hill Book Co Inc, p 341, 1953.Google Scholar
12. Timoshenko, S. P. and Gere, J. M. Theory of elastic stability. McGraw-Hill Book Co Inc, 1961.Google Scholar