Hostname: page-component-78c5997874-t5tsf Total loading time: 0 Render date: 2024-11-15T00:19:55.522Z Has data issue: false hasContentIssue false

Research at the College of Aeronautics Cranfield

Published online by Cambridge University Press:  04 July 2016

A. J. Murphy*
Affiliation:
College of Aeronautics
The Staff of the College
Affiliation:
College of Aeronautics

Abstract

The 1,142nd lecture to be given before the Society and the 37th Main lecture to be held at a Branch Centre "Research at the College of Aeronautics" by Professor A. J. Murphy, M.Sc., F.R.Ae.S., F.I.M., Principal, College of Aeronautics, was given under the auspices of the Cambridge Branch on 21st January 1960. Professor W. A. Mair, M.A., F.R.Ae.S., Francis Mond Professor of Aeronautical Engineering, University of Cambridge, and President of the Cambridge Branch, opened the proceedings and then handed over to the President of the Society, Mr. Peter G. Masefield, M.A., F.R.Ae.S., Hon.F.I.A.S., M.Inst.T.

Mr. Masefield: As an old Cambridge engineering man it was a great pleasure to be President of the Society in the year in which the first Main lecture was held at Cambridge.

One of the most important and significant developments in aeronautical education since the war had been the founding, and the progress in recent years under Professor Murphy, of the College of Aeronautics at Cranfield. It had been founded just after 1944 as a result of the Fedden Committee of that year, set up by Sir Stafford Cripps, then Minister of Aircraft Production. Cranfield was primarily concerned with two things: post-graduate training in all branches of aeronautics and associated sponsored research by both staff and students of the College. Professor Murphy was to speak on the latter part.

British aeronautics today was passing through one of those periodic upheavals which seemed to happen every few years in this great business in which so many of them were engaged. Some of the changes now in progress he thought could mean a great difference in British aviation in the 50 years to come, compared with the 50 years that had gone by, and many of them he hoped would be concerned in these changes and in the new era of British aviation which was just beginning. He hoped that 1960 would mark the beginnings of a new chapter in aviation history as 1910 had done fifty years ago.

Over the past 50 years about 85 per cent of work in aeronautics in Great Britain had been in the military field; certainly 85 per cent of industrial effort. In future, manned military aircraft would be only a small proportion of the effort. The rest would be in missiles, civil aeronautics and space activities. In all of these they would be working increasingly competitively internationally and particularly with America and Russia. To make real impact their technology must be the highest possible. There was no doubt that the two foundation stones on which everything else had to rest were firstly, sound basic technical education and secondly, first-class research effort. At Cambridge, and 40 miles away at Cranfield, both those aims were being pursued. He could not over-emphasise the importance of these two subjects. The Society was closely concerned in both education and research and, therefore, it was an especial pleasure to introduce Professor Murphy.

Since October 1955 Professor Murphy had been Principal of the College of Aeronautics. Graduating from Manchester University in 1920 with First Class Honours in Chemistry, he had first done some research at University College, Swansea, before going to the National Physical Laboratory Metallurgy Department. In 1931, he had joined J. Stone and Company Ltd. as Chief Metallurgist and spent some years in Industry as a Director of that company and its associates. In 1950 he became Professor of Industrial Metallurgy at Birmingham University and, three years later, Director of the Departments of Physical and Industrial Metallurgy, a post he held until his appointment in 1955 as Principal of the College of Aeronautics. Professor Murphy had been President of the Institute of Metals and of the Institution of Metallurgists.

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 1960

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

References

Published Papers

Department of Aerodynamics

1.Westley, R. and Lilley, G. M. (1952). An Investigation of the Noise Field from a Small Jet and Methods for its Reduction. C. o. A. Report 53, 1952.Google Scholar
2.Lilley, G. M., Westley, R., Yates, A. H. and Busing, J. R. (1953). On Some Aspects of Noise Propagation from Supersonic Aircraft. C. o. A. Report 71, 1953.Google Scholar
3.Green, D. J. and Lilley, G. M. (1955). Preliminary Report on the Use of the Wide Angle Diffuser in Ground Mufflers of the Type Used for Silencing Jet Aircraft. C. o. A. Note 27, 1955.Google Scholar
4.Lilley, G. M. (1958). On the Noise from Air Jets. (To be published in the R. & M. series.)Google Scholar
5.Hodgson, T. H. and Lilley, G. M. (1959). A Brief Review of U.S. and Canadian Work on Pressure Fluctuations in Turbulent Boundary Layers. (Unpublished.) 1959.Google Scholar
6.Busing, J. R., Marson, G. B. and Lilley, G. M. (1955). Experimental Investigation of the Interference of a Body on a Low Aspect Ratio Wing of Rectangular Planform at a Mach number of 2. C. o. A. Note 31, 1955.Google Scholar
7.Busing, J. R. and Lilley, G. M. (1955). A Preliminary Investigation of the Flow over a Particular Wing-Body Combination at M = 2. C. o. A. Note 24, 1955.Google Scholar
8.Marson, G. B. (1954). The Calculation of the Wave Drag of a Family of Low-Drag Axisymmetric Nose Shapes of Fineness Ratio 4·5 at Zero Incidence at Supersonic Speeds. C. o. A. Note 10, 1954.Google Scholar
9.Radhakrishnan, G. (1958). The Exact Flow Behind a Yawed Conical Shock. C. o. A. Report 116, 1958.Google Scholar
10.Marson, G. B. (1956). Aerodynamic Characteristics of Two Low Aspect Ratio Rectangular Wings at M = 2. C. o. A. Note 44, 1956.Google Scholar
11.Marson, G. B. and Lilley, G. M. (1956). The Displacement Effect of Pitot Tubes in Narrow Wakes at Subsonic and Supersonic Speeds. C. o. A. Report 107, 1956.Google Scholar
12.Pozniak, O. M. (1957). Investigation into the Use of Freon 12 as a Working Medium in a High-Speed Wind Tunnel. C. o. A. Note 72, 1957.Google Scholar
13.Barna, P. S. (1957). Aerodynamic Characteristics of a 40° Swept-Back Wing of Aspect Ratio 4·5 . C. o. A. Note 65, 1957.Google Scholar
14.Marsden, D. J., Simpson, R. W. and Rainbird, W. J. (1958). An Investigation into the Flow over Delta Wings at Low Speeds with Leading Edge Separation. C. o. A. Report 114, 1958.Google Scholar
15.Harris, K. D. (1958). Subsonic Drag and Pitching Moment Characteristics of Slender Cambered Bodies. C. o. A. Report 118, 1958.Google Scholar
16.Craven, A. H. (1956) A Potential Flow Model for the Flow about a Nacelle with Jet. C. o. A. Report 101, 1956.Google Scholar
17.Craven, A. H. (1956). The Free Streamline Method Applied to the Flow at the rear of a Duct. C o. A. Report 99, 1956.Google Scholar
18.Craven, A. H. (1957). The Effect of a Jet Deflection on the Interference of a Rearward Facing Jet. C. o. A. Note 70, 1957.Google Scholar
19.Craven, A. H. (1957). Interference of a Rearward Facing Jet on the Flow over Three Representative Afterbody Shapes. C. o. A. Note 60, 1957.Google Scholar
20.Craven, A. H. (1958). Effect of Body Incidence on Two Afterbodies with Rearward Facing Jet. C. o. A. Note 92, 1958.Google Scholar
21.Craven, A. H. (1959). The Effect of Density on Jet How at Subsonic Speeds. C. o. A. Report 120, 1959.Google Scholar
22.Craven, A. H. (1960). Base Pressure at Subsonic Speeds in the Presence of a Supersonic Jet. C. o. A. Report 129, 1960.Google Scholar
23.Willmer, M. A. P. (1956). On the Generalised Simple System for Automatic Stabilisation of a Helicopter in Hovering Flight. Journal of the Helicopter Association, October 1956.Google Scholar
24.Bryce, W. W. (1956). Independence of Helicopter Rotor Derivatives under Non-Uniformity of Induced Velocity Distribution at Low Forward Speed. C. o. A. Report 110, 1956.Google Scholar
25.Opatowski, T. (1958). The Stability of Flying Platform Helicopters. Journal of the Helicopter Association, October 1958.CrossRefGoogle Scholar
26.Lilley, G. M., (1952). An Investigation of the Flexure-Torsion Flutter Characteristics of Aerofoils in Cascade. C. o. A. Report 60, 1952.Google Scholar
27.Craven, A. H. and Davidson, I. (1955). The Flexure- Torsion Flutter of Cambered Aerofoils in Cascade. C. o. A. Report 95, 1955.Google Scholar
28.Milne, R. A. and Willox, F. G. (1955). Measurements of the Derivative Zw for Oscillating Wings in Cascade. C. o. A. Report, 1955.Google Scholar
29.Craven, A. H. (1960). Aerodynamic Derivatives of an Aerofoil Oscillating in an Infinite Staggered Cascade. C. o. A. Report 125, 1960.Google Scholar
30.Spillman, J. J. (1959). Some Thoughts on Slender All Wing Supersonic Air Liners. C. o. A. Note 87, 1959.Google Scholar
31.Nonweiler, T. R. F. (1958). The Man-Powered Aircraft— A Design Study. Journal of the Royal Aeronautical Society, October 1958.Google Scholar
32.Bird, G. A. and Lilley, G. M. (1957). On the Choice of the Working Fluid for Intermittent Supersonic Wind Tunnels. C. o. A. Report 112, 1957.Google Scholar
33.Clarke, J. F. (1958). Energy Transfer Through a Dissociated Diatomic Gas in Couette Flow. Journal of Fluid Mechanics. September 1958.Google Scholar
34.Lilley, G. M. (1959). A Simplified Theory of Skin Friction and Heat Transfer for a Compressible Laminar Boundary Layer. C. o. A. Note 93, 1959.Google Scholar
35.Clarke, J. F. (1958). Chemically Reacting Gas Flows. C. o. A. Report 117, 1958.Google Scholar
36.Clarke, J. F. (1958). The Linearised Flow of a Dissociating Gas. (Unpublished.) 1958.Google Scholar
37.Cleaver, J. W. (1959). Characteristics Theory Solutions of a Two-Dimensional Ideal Dissociating Gas Flow. C. o. A. Report 123, 1959.Google Scholar
38.Clarke, J. F. (1960). On the Sudden Contact Between a Hot Gas and a Cold Solid. C. o. A. Report 124, 1960.Google Scholar
39.Linge, E. R. (1956). Investigation into a Photoelastic Method for the Direct Measurement of Surface Strains in Metal Components. C. o. A. Report 97, 1956.Google Scholar
40.Hemp, W. S. (1955). On the Application of Oblique Co-ordinates to Problems of Plane Elasticity and Swept-Back Wing Structures. Aeronautical Research Council R. & M. 2754, 1955.Google Scholar
41.Hemp, W. S. (1955). Stress Analysis of Multi-Web Boxes. Fifth Anglo-American Aeronautical Conference, June 1955. Published by Royal Aeronautical Society.Google Scholar
42.Griffin, K. H. (1956). Certain Methods of Stress-Analysis of Particular Multi-Web Box Beams. C. o. A. Report 108, 1956.Google Scholar
43.Howe, D. (1956). An Approximate Solution to the Swept Wing Root Constraint Problem. C. o. A. Report 98, 1956.Google Scholar
44.Houghton, D. S. (1958). The Influence of Frame Pitch and Stiffness on the Stress Distribution in Pressurised Cylinders. C. o. A. Note 79, 1958.Google Scholar
45.Houghton, D. S. and Chan, A. S. L. Aircraft Pressure Cabin Analysis, An Extension of Existing Theory. (To be published in Aircraft Engineering.)Google Scholar
46.Houghton, D. S. and Chan, A. S. L. (1958). Discontinuity Stresses at the Junction of a Pressurised Spherical Shell and a Cylinder. C. o. A. Note 80, 1958.Google Scholar
47.Lempriere, B. M. (1958). Thermal Stresses in a Box Structure. C. o. A. Note 84, 1958.Google Scholar
48.Johns, D. J. (1958). Thermal Stresses in Thin Cylindrical Shells Stiffened by Plane Bulkheads for Arbitrary Temperature Distributions. C. o. A. Note 83, 1958.Google Scholar
49.Hemp, W. S. (1956). Fundamental Principles and Theorems of Thermo-Elasticity. The Aeronautical Quarterly, Vol. VII, August, 1956.Google Scholar
50.Emslie, B. (1959). Some Values of the Reduction Factor for Plastic Buckling of Plates in Shear. C. o. A. Note 90, 1959.Google Scholar
51.Preston, C. (1954). Some Bearing Materials under High Pressures at Low Rotational Speeds. C. o. A. Note 12, 1954.Google Scholar
52.Hemp, W. S. (1958). Theory of Structural Design. C. o. A. Report 115, 1958.Google Scholar
53.Houghton, D. S. and Chan, A. S. L. (1957). The Design of a Multi-Cell Box in Pure Bending for Minimum Weight. C. o. A. Note 74, 1957.Google Scholar
54.Johns, D. J. (1958). Optimum Design of a Multi-Cell Box Subjected to a Given Bending Moment and Temperature Distribution. C. o. A. Note 82, 1958.Google Scholar
55.Houghton, D. S. and Chan, A. S. L. The Design of a Pressurised Missile Body under Axial Compression. (To be published in Aircraft Engineering)Google Scholar
56.Johns, D. J. (1958). Some Panel Flutter Studies using Piston Theory. Journal of the Aeronautical Sciences, November 1958.Google Scholar
57.Johns, D. J. The Influence of Panel Deformations on Wing Flutter. (To be published in the Journal of Aero/Space Sciences.)Google Scholar
58.Johns, D. J. and Parks, P. C. Influence of Structural Damping on Panel Flutter. (To be published in Aircraft Engineering.)Google Scholar
59.Howe, D. (1959). Use of Models in Helicopter Vibration Analysis. The Aeroplane, pp. 1618, January 1959.Google Scholar
60.Goodger, E. M. (1957). Spontaneous-Ignition Data of Hydrocarbons and Aviation Fluids. C. o. A. Note 68, 1957.Google Scholar
61.Smith, A. G. A Theory of Resonance of Solid Rockets Based on Constant Propellant Surface Temperatures. (To be published.)Google Scholar
62.Carton, D. S. (1959). Minimum Propulsion for the Soft Moon Landing of Instruments. C. o. A. Note 94, 1959.Google Scholar
63.Goodger, E. M. (1958). The Ignition of Gaseous Mixtures by Heated Surfaces. London University Ph.D. Thesis. Internal, 1958.Google Scholar
64.Goodger, E. M. (1956). The Influence of Engine Speed Upon Pre-Ignition. C. o. A. Note 51, 1956.Google Scholar
65.Goodger, E. M. (1955). The Combustion Characteristics of a Cylindrical Rod Burner System. C. o. A. Report 90, 1955.Google Scholar
66.Harris, J. T. (1960). Clearance Fits and the Limits on Mating Parts. C. o. A. Note 96, 1960.Google Scholar
67.Paul, R. J. A. and Maxwell, M. E. (1958). The General Trend Towards Digital Analogue Techniques. Proceedings of International Analogue Computation Meeting, Strasbourg, pp. 403406, 1958.Google Scholar
68.Brown, D. C. and Faraday, B. P. (1957). A Transistorised Radiation Monitor. C. o. A. Note 66, 1957.Google Scholar
69.Brown, D. C. and Henderson, F. (1957). The p-n Junction as a Variable Reactance Device for f.m. Production. C. o. A. Note 76, 1957.Google Scholar
70.Brown, D. C. (1958). A Variable Delay Line. C. o. A. Note 81, 1958.Google Scholar
71.Adams, K. M. (1956). On the Synthesis of Three-Terminal RC Networks. C. o. A. Report 96, 1956.Google Scholar
72.Deards, S. R. (1956). Notes on the Theory of Planar Electric Networks. C. o. A. Note 52, 1956.Google Scholar
73.Hinchcliffe, S. and Jones, J. W. (1955). An Investigation into the Effect of Subsonic Vibrations during the Period of Solidification of Castings with Particular Reference to a Material for Gas Turbine Blades. C. o. A. Report 89, 1955.Google Scholar
74.Jones, J. W. and Jagaciak, J. (1955). Effect of Vibration, Sonic and Subsonic Frequencies during the Period of Solidification, on the Mechanical Properties of H.R. Crown Max and Nimonic C75. C. o. A. Report 91, 1955.Google Scholar
75.Ward, G. N. (1955). The Drag of Source Distribution in Linearized Supersonic Flow. C. o. A. Report 88, 1955.Google Scholar
76.Burrows, F. M. (1956). A Theoretical and Experimental Study of the Boundary Layer Flow on a 45° Swept-Back Wing. C. o. A. Report 109, 1956.Google Scholar
77.Burrows, F. M. (1956). A Note of Some Equipment used for Boundary Layer Measurements in Flight. C. o. A. Note 49, 1956.Google Scholar
78.George, J. M. The Measurement of Air Temperature in High Speed Flight. (To be published.)Google Scholar
79.Cleverdon, C. W. (1958). The Evaluation of Systems used in Information Retrieval. International Conference on Scientific Information, Washington, 1958.Google Scholar

Unpublished Theses

Department of Aerodynamics

Tl.Peduzzi, A. Nature and Suppression of Noise from a 1 in. Diameter Circular Jet. (1952).Google Scholar
T2.Woods, B. A. The Supersonic Flow Around a Yawed Cone. (1956).Google Scholar
T3.Radhakrishnan, G. and Coote, M. A. Measurements of the Pressure Distribution over Low Drag Bodies of Revolution at Incidence in Supersonic Flow. (1957).Google Scholar
T4.Grimson, J. Flow Separation on Cones at Incidence in Low Speed Flow. (1958).Google Scholar
T5.Clancy, L. J. and Smith, P. M. Flow Over a Delta Wing with Leading Edge Separation. (1958). DRUMMOND, A. M. and RICHARDSON, J. Flow Over a Delta Wing with Leading Edge Separation. (1959).Google Scholar
T6.Brown-Edwards, E. G. and Wesson, N. J. The Characteristics and Flow over a Yawed Slender Delta Wing Having 10% Thickness with Twin Fins. (1959).Google Scholar
T7.Sussex, A. D. and Felton, P. R. Investigation of High Lift Devices and Controls on Slender Wings. (1958).Google Scholar
T8.Gallagher, T. and Williams, R. Mixing of Inclined Jets with a Uniform Flow. (1959).Google Scholar
T9.Ayers, R. F. and Wilde, M. R. Aerodynamic Characteristics of a Swept Wing with Spanwise Blowing. (1956).Google Scholar
T10.Kisielowski, E. Potential Flow Past a Circular Cylinder with a Simulated Jet. (1957).Google Scholar
Hersee, E. H. W. and Hipp, A. Potential Flow Past a Circular Cylinder with a Simulated Jet. (1956).Google Scholar
T11.Sheikh, M. A. An Investigation of the Flexure-Torsion Flutter Characteristics of Aerofoils in Cascade. (1953).Google Scholar
T12.Cleaver, J. W. and Thomson, F. The Melting Characteristics of Bodies in a Heated Airstream at Supersonic Speeds. (1959).Google Scholar
T13.Harris, T. M. Interaction of a Flow of Ionized Argon Behind a Strong Shock Wave with a Steady Magnetic Field. (1959).Google Scholar

Department of Aircraft Design

T14.Halliwell, A. R. Stress Distribution in a Delta Wing. (1956).Google Scholar
T15.Sharman, P. E. W. Stress Analysis of Swept Cantilever Plates. (1956).Google Scholar
T16.Chopra, P. D. Investigation of the Stress Distribution in a Multi-Spar Swept Box. (1955).Google Scholar
T17.Coull, A. Theoretical Investigation of the Stress Distribution in Swept Cantilever Plates. (1955).Google Scholar
T18.Arthurs, T. D. On the Stress Concentration Around Pressure Cabin Cut-Outs under other than Pressure Loading. (1959).Google Scholar
T19.Rothwell, A. On the Stress Concentration Around Unreinforced Square Cut-Outs with Rounded Corners in a Pressure Cylinder. (1958).Google Scholar
T20.Hillel, A. Reinforced Circular Cylinder under Internal Pressure. Stress Distribution around a Cut-Out. (1956).Google Scholar
T21.Ashmead, F. A. H. The Thermal Conductivity of Joints with a View to Temperature Prediction in Built-Up Structures. (1955).Google Scholar
T22.Lovatt, J. D. Temperature Distribution in Structures Resulting from Aerodynamic Heating. (1956).Google Scholar
T23.Nichols, R. The Stability of "Honeycomb" Sandwich Panels in Shear. (1955).Google Scholar
T24.Naylor, H. F. The Effect of Curvature on Initial Buckling and Failure of Stiffened Curved Panels in Compression. (1953).Google Scholar
T25.Smith, D. H. Investigation into the Plastic Buckling of Plates in Shear. (1957).Google Scholar
T26.Kirton, J. L. Creep Phenomena in Structures. (1959).Google Scholar
T27.Swanson, S. R. Fatigue Assessment of Aircraft Structures. (1958).Google Scholar
T28.Pepper, D. H. Observations on the Mechanism of Fast Fracture in Ductile Materials. (1957).Google Scholar
T29.Etchells, R. Crack Propagation in Fatigue and its Relation to Pressure Cabin Design. (1959).Google Scholar
T30.Rowland, K. A. Design and Resonance Testing of Dynamic Model of a Swept Winged Aircraft and Comparison with Full Scale Tests. (1950).Google Scholar
T31.Pennell, W. E. Investigation into the Loads Developed on Outrigger Undercarriage Units. (1958).Google Scholar
T32.Smith, B. Further Development and Use of a Vector Method of Analysis in the Separation of the Normal Modes of Vibration of a Complex Structure. (1958).Google Scholar
T33.Sevier, H. G. An Experimental Investigation of Helicopter Ground Resonance. (1952).Google Scholar
T34.Cooke, A. An Investiaation of the Theory of Self- Excited Mechanical Oscillations of a Helicopter. (1953).Google Scholar
T35.Smith, E. H. Model Helicopter Ground Resonance Testing. (1955).Google Scholar
T36.Reed, P. R. Ground Resonance Testing of the Skeeter Helicopter Dynamic Model. (1957).Google Scholar
T37.Topp, K. F. The Torsional Vibration of a Helicopter Transmission System–An Investigation of Mechanical Analogue Techniques. (1958).Google Scholar

Department of Aircraft Propulsion

T38.Seyb, N. J. The Whirling of a Rotor System Mounted in Flexible Bearings. (1959).Google Scholar
T39.Baker, A. G. J. An Investigation into the Ground Effects of Convergent-Divergent Nozzles. (1959).Google Scholar
T40.Green, T. The Interaction of Jets with Surfaces. (1958).Google Scholar
T41.Dawson, W. F. An Investigation into the Possibility of Ignition Through Shock Waves, and the Principles Considered in a Ram-Jet. (1958).Google Scholar
T42.Leonard, I. C. A. Shock Ignition and its Application to Ram-Jets. (1959).Google Scholar
T43.Glanister, C. F. M. Flame Stability in a Cascade of Porous Blade Burners. (1959).Google Scholar
T44.Little, J. P. Combustion of Special Fuels–Hydrogen as an Aviation Fuel. (1958).Google Scholar
T45.Lucas, G. G. Hydrogen as an Aviation Fuel. (1958).Google Scholar
T46.Callaghan, W. M. Combustion of Slurry Fuels. (1958).Google Scholar
T47.Henshaw, J. B. Research into Slurry Fuels. (1959).Google Scholar

Department of Economics and Production

T48.Cree, A. H. An Investigation into the Standards of Accuracy Attainable on High Precision Grinding Machines Operating under Carefully Controlled Conditions of the Type which could be Reproduced on a Commercial Basis. (1959).Google Scholar
T49.Norbury, C. J. The Application of Memo-Motion to Industrial Operation. (1954).Google Scholar
T50.Ayre, K. H. An Investigation into the Applications of Non-Continuous Memo-Motion in Industry. (1958).Google Scholar
T51.Bowles, I. E. J. The Development of Photo-Sampling Techniques in Work Study. (1959).Google Scholar

Department of Electrical Engineering

T52.Penny, M. F. A Grid Controlled Photo-Multiplier. (1959).Google Scholar
T53.Lee, K. C. A Parallel Binary Adder using Surface Burner Transistors. (1959).Google Scholar
T54.Freen, D. A Radioactive Method for the Measurement of Small Displacement. (1959).Google Scholar
T55.Baughen,, J. E. A Pulse-Width Modulated/Frequency Modulated Subcarrier Generator using the Hole Storage and Variable Reactance Properties of a Transistor. (1959).Google Scholar
T56.Moten, J. M. The Human Operator in a Closed Loop System. (1959).Google Scholar
T57.Sheppey, G. C. Two Approximation Procedures for Network Synthesis. (1958).Google Scholar
T58.Leat, A. F. V. Sketch for a General Theory of Equivalent rc-ports. (1957).Google Scholar
T59.Abraham, D. Synthesis of Electric Networks for Specified Response in the Time Domain. (1955).Google Scholar
T60.Hodgson, T. H. Combinatorial Topology and Electrical Network. (1956).Google Scholar
T61.Mitchell, H. D. Development of a Digital Product- Integrator for the Evaluation of Convolution Integrals. (1955).Google Scholar
T62Mercer, D. Methods of Binary-Decimal Data Conversion Using Saturable Reactors. (1955).Google Scholar
T63.Venkateswaran, G. Analysis and Design of a Transistor Analogue-Digital Converter. (1958).Google Scholar
T64.Thomas, N. V. Design Techniques for Servomechanisms. (1959).Google Scholar
T65.Flegg, H. G. The Manipulation and Minimization of Boolean Switching Functions. (1959).Google Scholar
T66.Toplis, J. E. Transistorized Transient Recorder. (1957).Google Scholar
T67.Dent, C. W. Accurate Distance Measurement using a Magneto-Strictive Delay Line. (1959).Google Scholar
T68.Sodhi, I. S. Generalisation of the Strecker-Feldtkeller Matrix Theory of Linear Quadripoles. (1956).Google Scholar
T69.Davison, R. C. Radio Frequency Currents in the Metal Surface Around a Notch Aerial. (1956).Google Scholar
T70.Gray, R. I. The Measurement of Surface Current and Charge at Centimetric Wavelengths in the Determination of Radar Echoing Areas. (1957).Google Scholar
T71.Byers, D. J. A Survey of Surface Current Measuring Systems and a Technique for the Assessment of their Accuracy. (1958).Google Scholar
T72.Kshirsacar, A. R. A Method to Determine Direct Axis Transient Reactance and Direct Axis Short Circuit Time Constant of Aircraft Alternator. (1959).Google Scholar
T73.mckay, J. P. Transient Resistance of d-c Generators. (1956).Google Scholar
T74.Singh, H. Investigation into the Effects of Rectifier Loads on a Three-Phase Alternator. (1958).Google Scholar
T75.Stopher, H. E. On the Nature of the Hysteresis Motor. (1959).Google Scholar

Department of Mathematics

T76.Clancy, L. J. An Investigation into Some Errors Involved in a Numerical Process for Evaluating the Wave Drag on Non-Lifting Slender Bodies in Linearised Theory. (1958).Google Scholar