Archaeologists worldwide have shown much interest in the origins of metallurgy in China (e.g. Mei 2005; Hanks et al. 2007; Parzinger 2011; Fan et al. 2012). Around 2200–1700 BC, the Seima-Turbino Culture originated in the Altai Mountains of Central Asia and spread across the Eurasian steppes (Chernykh 2004, 2008). The most iconic artefact of this culture is the socketed spearhead with single side hook; these have been found across the Eurasian steppes (Figure 1: 1–2). Two new observations of these spearheads suggest that Seima-Turbino metal-casting technology was responsible for the development of metallurgy in China.
Investigation and alloy compositions
The earliest metal spearheads from northern China (Figure 1: 4–5 & 7–10) can be classified into two types. Type I is the Seima-Turbino spearhead, which has a hook and a triple-line decoration near the end of the hook (Figure 1: 4 & 6). Type II is the Chinese imitation of Type I, with a hook and a ring on opposite sides, but lacking the triple-line decoration (Lin Reference Lin, Taishan and Jinxiu2015; Figure 1: 7, from the Qijia Culture at Shenna).
Recent research on cultural exchanges between the Seima-Turbino and other Bronze Age cultures tested 16 pieces of Seima-Turbino spearhead fragments using XRF (Liu Reference Liu2015). Table 1 shows that nine were copper, five were copper-arsenic (Cu-As) alloys and only two were copper-tin (Cu-Sn) alloys. Analysis of metal artefacts from the Erlitou site showed that six were bronze, four were copper-lead-tin (Cu-Pb-Sn) alloys, two were copper and only one was a Cu-As alloy (Jin Reference Jin2000).
Previous research has shown that metal artefacts in central China were dominated by Cu-Sn alloys (Table 2), and artefacts made of Cu and Cu-As alloys are less common. Cu-Sn alloy artefacts from the Erlitou site account for 76.9 per cent. In contrast, only 12.5 per cent of Seima-Turbino-style spearheads were of Cu-Sn alloy. The proportion of Cu (31.25 per cent) and Cu-As (56.25 per cent) spearheads stands at 87.5 per cent (Table 2). Metal artefacts of the Qijia Siba Cultures in Gansu and Qinghai provinces (which exhibit earlier features than Erlitou sites) were dominated by Cu and Cu-As alloys (Sun & Han Reference Sun and Han1997). In terms of metal composition, therefore, the Seima-Turbino complex in China demonstrates the early stage of bronze-casting technology. The technology of the Erlitou site was, however, already at a more advanced stage.
Among the 16 earliest spearheads so far known, only six have archaeological provenance: one from the Shenna site and four from the Longshan Culture layer (c. 2600–1900 BC) of the Xiawanggang site in Henan (Lin Reference Lin, Taishan and Jinxiu2015). This latter site also yielded a spearhead hook fragment from the Erlitou Culture layer (Henan Institute of Archaeology 1989). That spearhead was discarded during the Bronze Age of the Erlitou Culture (c. 1900–1500 BC) (Liu & Chen Reference Liu and Chen2012).
The jade pendants
One spearhead from the western Liao River area (with no archaeological context) is housed at the Chaoyang Museum in Liaoning. Our research suggests that it was unearthed together with a semi-annular jade pendant (of jade-huang), by a local farmer. This is attributed to the Taosi Culture (c. 2500–1800 BC) (Gu Reference Gu2015), a date contemporaneous with the Lower Xiajiadian Culture (c. 2000–1400 BC).
Strassberg (Reference Strassberg2003; Shan Hai Jing) describes semi-annular jade pendants as part of ritual ware from the Chinese Xia dynasty. He recounts that: “In his [the Xia sovereign, Qi] left hand, he held a feathered pennant, in his right, a jade ring, and he wore a jade semicircle [read, semi-annular jade pendant] on his belt” (Strassberg Reference Strassberg2003: 168). The earliest (securely dated) semi-annular jade pendant dates to the Neolithic period (2200–1600 BC) in northern China. This type of ornament has been found at many early Bronze Age sites, such as the Qijiang Culture sites in Qinghai and Gansu provinces, the Longshan Culture sites in Shaanxi province and the Taosi Culture sites in Shanxi province. The ornaments can be divided into three groups. The first is represented by two semi-annular jade pendants, dated to the Taosi Culture (2500–1800 BC) (Figure 2: 1–2). The second group refers to the three divided ring pendants (Figure 2: 5–6), which are dated to the Bronze Age Qijia Culture in Qinghai and Gansu provinces (2200–1600 BC) (Liu & Chen Reference Liu and Chen2012; Gu Reference Gu2015). The third group are jade ring pendants dating to the time between the first two groups (Figure 2: 3–4).
According to our investigation, the spearhead was excavated along with the semi-annular jade pendant. We could, therefore, conclude that they are of the same date. Through the study of the semi-annular jade pendant, the date of Seima-Turbino spearheads in China was further determined. (Jade-huang of this type was also found in the Taosi and Qijia Cultures.) The semi-annular jade pendant is, however, traditionally a ritual object in China. The archaeological association of the pendant with the Seima-Turbino-style spearhead suggests a transitional function for the latter—from weapon to ritual object.
Discussion and conclusion
To develop the theory on the origin of Chinese metallurgy further, two observations have been made. First, a chronological observation suggests that the early spearheads have a narrower head in the shape of a willow leaf with a hook and triple-line decorations (Figure 1: 2–3), whereas the later spearheads have a wider willow-leaf-shaped head but retain the triple-line decoration (Figure 1: 1). The former type is similar to south Siberian Okunevo culture spearheads (c. 2400–1800 BC), while examples of the latter type are from the Rostovka Cemetery near Omsk (Figure 1: 1) (Chernykh Reference Chernykh1992; Svyatko et al. Reference Svyatko, Mallory, Murphy, Polyakov, Reimer and Schulting2009).
Spearheads of the latter type have also been discovered in China (Figure 1: 4). These Chinese imitations are, however, in the shape of a broad leaf, without the triple-line decoration. The metal spearhead from Chaoyang has a narrower head in the shape of a willow leaf but lacks a hook (Figure 1: 6). This is the same form as the Rostovka Cemetery spearheads, and similar to the Seima-Turbino spearhead housed in the Shanxi Crafts Museum. Examination of the Chaoyang spearhead indicates that it was made of a Cu-Sn alloy.
The Niuheliang site, which yielded evidence for Chinese bronze casting, is very valuable to the study of the origins of Chinese metallurgy (Li et al. Reference Li, Han, Bao and Chen1999). Although this site was initially dated to the Hongshan Culture (c. 4500–3000 BC) (Liu & Chen Reference Liu and Chen2012), radiocarbon analysis has placed it at 3300±300 to 3494±340 cal BC, roughly correlating in date to the Lower Xiajiadian levels at the site (An Reference An2003; Gu Reference Gu2015).
These new observations suggest that the distribution of metal spearheads from the Seima-Turbino Culture to northern China represents the diffusion and spread of the metallurgical technique. From the metallurgical perspective in particular, the bronze casting of spearheads indicates the origin of piece-mould casting and core-casting technology, which influenced the bronze vessel casting method in China. We therefore suggest that the early Chinese metallurgy of the Lower Xiajiadian Culture in the western Liao River area can be linked to the Seima-Turbino Culture; this technique had spread from the Altai Mountain area to northern China via the Taosi Culture. After spreading to the Lower Xiajiadian Culture, it finally arrived at the Qijia Culture of Qinghai and Gansu provinces in the west (Figure 3).